《厂家无线充推荐文案英文模板》由会员分享，可在线阅读，更多相关《厂家无线充推荐文案英文模板（4页珍藏版）》请在金锄头文库上搜索。
1、Wireless charger Specification*This products is compatible with wireless charging protocol of Qi (V1.0&1.1)WPC.*Can be fit for Qi standard receiving equipment(within 5W) rechargeable.easy and fast.*Without the trouble of charging cable the writing and a different interface,be easier to safeguard equ
2、ipment and power full,it will be the direction of charger development in recent years.Use steps1. Connect the USB micro cable between the charger and the power adapter,Plug the power adapter power (white light for 2 seconds)2. Wait for the Qi-Compatible receiving devices(blue light)3. Qi-Compatible
3、receiving devices placed on a launcher(note at the charger zone)charger Qi after receiving devices is detected,begin to power a device,a green light green light brightness relative to receive the size of the output power of the device.4. The receiving devices removed from the charger (blue light) 5.
4、 During use,such as the power adapter under voltage,over voltage;over temperature,over current;stop charging,the red light flashes,after a period of time to go back to step 2;6. Note:Different models and versions of the products,the operation light expressed different;ON/OFF version need to press*Li
5、ght Status1. White light Power on2. Blue led:standby3. Green light:charging4. Red light flashing:voltage/current/temperature anomaliesNote:different models and versions of the product,presentation of the light variesNotes:1. This product must be used as required,otherwise it will cause a fire,explos
6、ion or other danger risk.2. Before use,check the power adapter parameters are appropriate and reliable quality ,security authentication,check whether the output current charging current is 1.5 times larger than the receiving device,as this may cause does not charge or low charging current and may ev
7、en damage the power adapter.3. Check that the USB cable is suitable connectors for connections,the device charging current is large,use a 1.5-2.0A USB cable,it may cause connot be charged,negative phenomena such as frequent start4. To ensure that no debris on the charging platform,sensitive equipmen
8、t and other non-metals or electromagnetic Qi a articles should not be placed on the charging platform 5. Ensure that the device meets the Qi and suitability of location,location doesnt fit can result in not charging,negative phenomena such as frequent start6. Ensure charging platforms and devices ar
9、e not overheating,such as overheating,please cut off the power supply,to cool before attempting to charge7. Keep the device dry,do not store or use a device in hot and cold environment8. Do not attempt to open,throw,hit or shake the device.9. Medical device manufacturers recommended distance between
10、 a wireless device and implanted medical device at least 15.3cm,to avoid potential interference with the medical device,if there is any reason to suspect that interference occurs,please cut off the power,follow the device manufacturers instructions,you have any questions,please consult the relevant
11、personnel and equipment suppliers;Technical parameters:Product name:Wireless chargerProduct Number:FX-W-T1501Fit Standard:the Qi standard compliant V1.0/V1.1Number of coils:oneCharging distance:5mmInput voltage:DC 4.65.5VInput current:500-2000mADriven load：5WCharging efficiency75%Operating temperatu
12、re:040Humidity range：4585%RHProduct Warranty*Purchase of this product,please read the following warranty terms,ensure that the product is effective warranty1. Fill out the warranty card information carefully to keep the card,and stamp of distributor to confirm2. Please provide both the warranty card
13、3. Ensure that the warranty card content is true or otherwise invalid 4. Product warranty for 1 year,if the product fails during the warranty period,is a poor quality components or production problems,will provide free maintenance and replacement parts*The following result product damage in normal u
14、se is not included in the scope of warranty 1. Not used according to the manual 2. All considered to be accidents or human damages3. Without a corporate-approved maintenance.4. The product shell aging,scrapes and scratches*After the warranty expires,users can still be repair service.but would have t
15、o pay the corresponding feeList:1. Specification2. Wireless charger FX-W-T15013. The Micro USB cable(optional)Note:not included in the standard configuration the power supply adapter, DC5V 1.5A are recommended over quality and reliable USB adapter.Interface Micro USB Input Voltage DC5V (4.6-5.5V)Input current 500-2000mA
