液压图形符号课件

上传人:s9****2 文档编号:591685217 上传时间:2024-09-18 格式:PPT 页数:75 大小:505.50KB
返回 下载 相关 举报
液压图形符号课件_第1页
第1页 / 共75页
液压图形符号课件_第2页
第2页 / 共75页
液压图形符号课件_第3页
第3页 / 共75页
液压图形符号课件_第4页
第4页 / 共75页
液压图形符号课件_第5页
第5页 / 共75页
点击查看更多>>
资源描述

《液压图形符号课件》由会员分享,可在线阅读,更多相关《液压图形符号课件(75页珍藏版)》请在金锄头文库上搜索。

1、 Hydraulic Graphic Symbols to ISO 1219 ISO 1219 液压图形符号1 ContinuousWorking linepower lineDashedPilot control lineExternal/internal drain lineCross-over position连续线工作油路动力油路虚线先导控制油路外部/内部泄油油路过渡位置2 Chain dottedEnclosure of two or more functions contained in one unit DoubleMechanical connections(Shaft, le

2、ver, piston rod)点划线在一个单元内两个或更多功能的围框 双线机械连接(轴,杠杆,活塞杆)3 Filledhydraulic Openpneumatic实心三角形液控 空三角形气控4 Straight or angledMovement in a straight line, flow path anddirection through a valveDirection of thermal flowCurvedDirection of rotation,Gives the direction of rotation viewed from shaft end直线或斜线直线油路中

3、的运动,流动路径和通过阀的方向热流方向曲线旋转方向从轴端看旋转方向5 Diagonal arrowFacility for adjustment of pumps, motors, springs, solenoidsElectrical对角线泵、马达、弹簧、电磁铁的调节装置电气6 Path or connection closedLinear electrical actuators acting in opposite directions 路径或连接中断双方向作用线性电气执行器7 Temperature indicator or temperature controlDrive unit

4、温度指示或控制驱动单元8 SpringThrottle弹簧节流孔9 ConnectionCross-over连接交叉10 Flexible hose Air bleed connection,continuous软管 放气连接连续11 Air bleed connectiontime limitedopen / closed Quick release couplingwithout mechanically opening check valve 放气连接时间限制开 / 闭快换接头没有机械打开的单向阀12 Quick release couplingwith mechanically ope

5、ning check valveRotary coupling with 1 connection快换接头有机械打开的单向阀回转接头带一个油路13 Rod, linear motion Shaft, rotary motion 杆,线性运动轴,旋转运动14 Detent, retains pre-determined position General symbol棘爪,保持在预先位置通用符号15 Push buttonPull-out knob 按钮拉出钮 16 Push button/pull-out knob Lever按钮/拉钮手柄17 Pedal, 1 direction of ope

6、ration Pedal, bi-directional 踏板,一个工作方向 踏板,双方向 18 Push rodRoller shaft压杆滚轮19 Push rod with stroke limitation Spring带行程限制的压杆弹簧20 Roller lever Electrical, 1 coil 摆臂 电气线圈21 Electrical, 2 opposed coilsElectrical, 2 opposed adjustable coils电气,双线圈电气,双比例线圈22 2 parallel acting actuators Actuation by pressure

7、 loading/unloading,acting direct on actuator 2并联执行器通过压力加载或卸载23 Actuation by pressure loading/unloading,by different sized control areas situated opposite each other Internal control channel 双向液控,作用面积不同 内部控制通路 24 External control channel Pneumatic / hydraulic actuation 外控气控/液控 25 2 stage hydraulic ac

8、tuation 2 stage electrohydraulic actuation, external pilot oil feed2级液控 2级电液控制,外部油源26 2 stage pneumatic-hydraulic actuation, external pilot oil drain 2 stage electrohydraulic actuation, spring centered mid-position, external pilot oil feed and drain2级气液控制,外部泄油 2级电液控制,弹簧回中,外部油源和泄油 27 2 stage electroh

9、ydraulic actuation, pressure centered mid-position, external pilot oil feed and drain External return of actuator actual position2 级电液控制,压力回中,外部油源和泄油执行器实际位置外部返回28 Internal return of actuator actual positionHydraulic执行器实际位置内部返回液压29 Pneumatic Electric motor气动 电动机30 Drive unit, except electric motor Fi

10、xed displacement pump, general 驱动单元,除了电动机 定量泵31 Fixed displacement pump1 direction of flow1 direction of rotation Variable displacement pumpbi-directional flow1 direction of rotationleakage port 定量泵单方向流动单方向旋转变量泵,双向流动,单方向旋转,带泄油口32 Fixed displacement motor,bi-directional flowbi-directional rotationFix

11、ed displacement pump/motor,1 direction of flow1 direction of rotation 定量马达双向流动双向旋转定量泵/马达单流动方向单旋转方向33 Variable displacement pump/motormanual adjustment,bi-directional flowbi-directional rotationleakage port Hydraulic rotary motor 变量泵/马达手动变量双向流动双向旋转泄油口摆动马达34 Hydraulic compact gear Variable displacemen

12、t pump with pressure compensator1 direction of flow1 direction of rotationleakage port液压紧凑齿轮泵 恒压变量泵单方向流动单方向转动泄油口35 Variable displacement pump/motor with pressure compensatorbi-directional flowbi-directional rotationleakage port Single acting cylinder, return stroke by undefined force恒压变量泵/马达单方向流动单方向

13、转动泄油口单作用液压缸,外力缩回36 Single acting cylinder, spring returnDouble acting cylinder with single piston rod 单作用液压缸,弹簧复位单活塞杆双作用液压缸37 Double acting cylinder with double piston rodSingle rod cylinder双活塞杆双作用液压缸单杆液压缸38 Single acting hydraulic cylinder, return stroke by pressure loading, piston area connected t

14、o tankDouble acting hydraulic cylinder single piston rod, adjustable cushioning at both ends 单作用液压缸,压力释放伸出,无杆腔接油箱双作用液压缸,单活塞杆,双端可调缓冲39 Telescopic hydraulic cylinder,single actingTelescopic hydraulic cylinder,double acting多级液压缸,单作用多级液压缸,双作用40 Without pre-load With gas pre-load 无预加载气体预加载41 Gas bottle,v

15、ertical position only Valve with 2 spool positions and 1 cross-over position 气瓶,垂直位置带有两个阀位和一个过渡位的阀42 Valve with 2 spool positions,2 ports,initial position closed, bi-directional flow Valve with 2 spool positions,2 ports, initial position open,bi-directional flow 2位2通阀,初始位置导通,双向2位2通阀,初始位置开路,双向43 Valv

16、e with 2 spool positions,3 ports, initial position open,bi-directional flow 2/2-directional valve,2 ports,2 spool positions 2位3通阀,初始位置开路,双向2位2通阀44 3/2-directional valve,3 ports,2 spool positions,1 cross-over position,solenoid actuation,initial position defined by spring 5/2-directional valve,5 ports

17、,2 spool positions,actuation by pressure loading in both directions 2位3通方向阀1个过渡位置电磁铁驱动初始位置弹簧决定2位5通方向阀1个过渡位置液控换向45 4/3-directional valve (detailed symbol),electrohydraulic actuation,4 ports,3 spool positions,spring-centered mid-position,emergency actuation,external pilot oil drainSimplified symbol 简化

18、符号 3位4通方向阀弹簧回中紧急操作外部油源和泄油46 4/3-directional valve(detailed symbol),electrohydraulic actuation,4 ports,3 spool positions,Spring-centered mid-position,emergency actuation,external pilot oil drainSimplified symbol 简化符号 3位4通方向阀弹簧回中紧急操作外部油源和泄油47 Valve with 2 end positions and unlimited cross-over positio

19、ns Valve with 3 defined positions and unlimited crossover positions2位阀无限制的过渡位置2位阀无限制的过渡位置48 Proportional/servo valve,negative overlap Proportional/servo valve,positive overlap比例阀/伺服阀负遮盖比例阀/伺服阀正遮盖49 4/3-way servo valve(typical example) Check valve, unloaded3位4通伺服阀 (典型例子) 单向阀,无弹簧50 Check valve, spring

20、 loaded Check valve, pilot operated, without spring pre-load单向阀,有弹簧单向阀,先导操作,无弹簧51 Check valve, pilot operated, with spring pre-load Shuttle valve 单向阀,先导操作,有弹簧梭阀 52 Bleed valve Pressure valve, 1 throttling cross section, normally closed释放阀 压力阀,1个节流口,常闭53 Pressure valve, 1 throttling cross section, no

21、rmally openPressure limiting valve, direct operated,internal pilot oil feed 压力阀,1个节流孔,常开压力限制阀,直动,内控内泄54 Pressure limiting valve, direct operated,external pilot oil drain Pressure limiting valve, pilot operated,internal pilot oil feed and drain 压力限制阀,直动,内控外泄压力限制阀,先导操作,内控内泄55 Pressure limiting valve,

22、pilot operated,electrically actuated decompression,internal pilot oil feed,external pilot oil drain2-way pressure reducing valve,direct operated,internal pilot oil feed 压力限制阀,先导操作,电控卸荷,内控内泄2通减压阀,直动,内控56 2-way pressure reducing valve,pilot operated,internal pilot oil feed,external pilot oil drain 3-w

23、ay pressure reducing valve,direct operated,internal pilot oil feed 2通减压阀,先导操作,外泄3通减压阀,直动,内控57 Throttle valve, adjustable Shut-off valve 可调节流阀 行程阀58 Throttle/check valve2-way flow control valve,pressure compensated 单向节流阀2通流量阀,压力补偿59 2-way flow control valve,pressure and temperature compensated 3-way

24、flow control valve,pressure and temperature compensated 2通流量阀,压力和温度补偿3通流量阀,压力和稳定补偿60 Flow divider 2-way cartridge valves(logic elements),directional valve, free from oil leakage,different effective areas 分流阀 2通插装阀(逻辑单元),直动,泄油自由,不同作用面积61 Flow control valve Directional valve,free from oil leakage in o

25、ne direction,same effective areas 流量控制阀 方向阀,一个方向泄油资源,相同作用面积62 Tank, open (to the atmosphere)Tank, open (to the atmosphere),end of pipe above level of liquid 油箱,开式(通大气)油箱,开式(通大气)油管端在液面上63 Tank, open (to the atmosphere),end of pipe below level of liquid Tank, open (to the atmosphere),end of pipe from

26、bottom of tank油箱,开式(通大气) 油管端在液面下油箱,开式(通大气) 油管端在油箱底部64 Tank, bledPressure tank油箱,放气阀压力油箱65 Filter Filter with clogging indicator 过滤器 过滤器,带堵塞指示66 SeparatorFilter with separator分离器带分离器的过滤器67 Conditioning unit consisting of:Filter, separator, pressure reducing valve, pressure gauge and lubricator Cooler

27、 单元包括:过滤器,分离器,减压阀,压力表和润滑冷却器68 HeaterTemperature controller 加热器温度控制器69 Pressure indicator, general Pressure gauge压力指示,通用 压力表70 Differential pressure gauge Liquid level measuring gauge 差压压力表液位测量表71 Thermometer Flow indicator 温度计 流量指示72 Flow measuring device Tachometer流量计 转速计73 Torque measuring device Hydro-electric pressure switch 扭矩测量装置压力继电器74 Limit switch行程开关75

展开阅读全文
相关资源
正为您匹配相似的精品文档
相关搜索

最新文档


当前位置:首页 > 办公文档 > 教学/培训

电脑版 |金锄头文库版权所有
经营许可证:蜀ICP备13022795号 | 川公网安备 51140202000112号