《触摸屏检验规范作业指导书》由会员分享,可在线阅读,更多相关《触摸屏检验规范作业指导书(6页珍藏版)》请在金锄头文库上搜索。
1、Table of contents 目录1 Sample Specification 样品规格1.1 Product name Code No. 品名编号1.2 Scope 适用范围1.3 Features and General Specifications 特征和规格1.4 Environment Conditions环境参数1.5 Mechanical characteristics 机械性能1.6 Electric characteristics电器性能2 Appearance limit standard 外观检验标准2.1 Scope 适用范围2.2 Inspection Cond
2、itions 检测条件2.2-1 Scratch 刮伤2.2-2 Dot-like Foreign Matter 点状杂物2.2-3 Linear Foreign Matter 线状杂物2.2-4 OCA bubbles and bend透明胶汽泡 /变形2.2-5 Dot-like Foreign Matter2.2-6 Chip And Crack 碎裂、破损2.2-7 others3 Reliant condition 信赖性条件4 Engineering Drawing 工程图Warranty Products manufactured to these specifications
3、shall be capable of meeting all characteristics delivery onwards or for a minimum period of 1 year of the customer received when stored and used as specified under normal conditions within the contents of these sheets. 保质期此规格触摸屏,从出货之日起或客户收到产品后,至少一年内应符合下列正常条件下的储存和使用规格。1 Sample Specification 样品规格1.1 P
4、roduct name Code No.: Transparent touch panel 品名编号:透明轻触开关 1.2 Scope 适用范围This specification shall apply to metal pen or finger input transparent capacitive touch panel. 此样品为用专用金属笔或手指操作的电容式 透明轻触开关。1.3 Features and General Specifications 特征和规格Features特征1Construction 结构Materials used 所用材料Comment 注释Graph
5、ic overlay 面版toughened glass 钢化玻璃Thickness :0.7mm 厚度 :0.7mm Graphic overlay OCA 透明胶Adhesive 粘胶Thickness :0.125mm 厚度:0.125mm TOP FILM PET 薄膜Thickness :0.125mm 厚度 :0.05mm Graphic overlay OCA 透明胶Adhesive 粘胶Thickness :0.05mm 厚度 :0.05mm TOP FILM PET 薄膜Thickness :0.125mm 厚度 :0.05mm General Specifications
6、规格 (L=long 长; W=wide 宽 ; T= thickness 厚) Item 项目Specifications规格Unit单位TP Outline外形尺寸130.74 ( L) 63.2 (W) 1.1(T) mm Viewing Area可视区99.64 (L) 56.48 (W)mm Active Area 驱动区100.64 ( L) 57.48 (W)mm 1.4 Environment Conditions 环境参数Items 项目Value 值Operating temperature & Humidity 工作温湿度范围-20 -+70 : Storage temp
7、erature & Humidity 储存温湿度范围-30 -+80 : 1.5 Mechanical characteristics机械性能Items 项目Value 值Optical characteristics光学特性Transparency 透明度大于86% Hardness 表面硬度6H 1.6 Electric characteristics电气性能ItemsValue 值2Supply voltage2.8-3.6V (DC)2 Appearance limit standard 外观检验标准 2.1 Scope 范围Touch panel visible side. 产品的可
8、视区2.2 Inspection conditions 检测条件(1) The brightness in text site:500LUX 光照条件 :500LUX (2) Inspection distance:30cm 检测距离 :30cm (3) visual angle:60 度检测角度: 60 度(4) light source:40W natural light 电源强度 : 40W A source of light(12-20W )光源Eyes 眼睛200-400mm 300-500mm 45(Remark: D=diameter 直径; L=length 长度; W=wid
9、th 宽; GT=glass thickness 玻璃总厚)2.2-1 visual area 透明可视区Scratch 刮伤CRITERIA DECISION W0.05mm 宽0.05mm Ignored. 可以忽略30.05mmW0.1mm 0.05mm 宽0.1mm L3mm,two objects are ignored. 长L3mm, one objects are ignored 5mm 长3mm ,允许 1 条;W0.1mm 宽0.1mm The T/P is regarded as a defect. T/P 属不良品。 2.2-2 Dot-like Foreign Matt
10、er 点状杂物CRITERIA DECISION D0.1mm 直径 0.1mm Ignored 可忽略 (密积不可 ,1 平方 CM 点杂物不可超过3 个) 0.1mmD0.15mm 0.15mmD20mm in distance from any other foreign object.Two objects are allowed. 0.1mmD20mm, 允许有两个存在; 0.15mmD0.2mm 直径 0.2mm The T/P is regarded as a defect. T/P 属不良品。2.2-3 Linear Foreign Matter 线状杂物CRITERIA DE
11、CISION W0.025mm 宽0.025mm L2mm Ignored. L2mm 可以忽略0.025W0.05mm 0.025 宽0.05mm L10mm one object is ignored. 长10mm ,允许一条;W0.05mm or L3mm 宽 0.05mm 或长 3mm The T/P is regarded as a defect. T/P 属不良品。2.2-4 OCA bubbles and bend 透明胶汽泡 /变形CRITERIA DECISION V/A 区点状汽泡直径0.2mm 以下,允许1 个, OCA 轻微波浪纹变形不影响FILM变形可接受OCA 点状
12、汽泡用检验规量测,OCA 轻微波浪纹变形需将产品平放于检验光源下300400mm 检验观察FILM 有无变化4Non- visual area(overlay)非透明可视区 (面版) 2.2-5 Dot-like Foreign Matter 点状杂物CRITERIA DECISION D0.2mm 直径 0.2mm 直径 0.2mm The T/P is regarded as a defect. T/P 属不良品。2.2-6 Chip And Crack 碎裂、破损Corner fragment: X2.0mm and Y 2.0mm and Z GTit is ignored 1) Co
13、rner fragment in the golden finger that seriously affects the product function is regarded as a defect. 2) Corner fragment in the circuit that seriously affects product function is regarded as a defect. 角断裂: X2.0mm ,Y2.0mm 和 ZGT ,可以忽略1) 若角断裂位于金手指处,严重影响产品的功能,T/P 属不良品;2) 若角断裂位于线路上,严重影响产品的功能,T/P 属不良品。S
14、ide fragment: X5.0mm and Y 1.0mm and Z GT it is ignored 1) Side fragment in the golden finger that seriously affects the product function is regarded as a defect. 2) Side fragment in the circuit that seriously affects product function is regarded as a defect. 边断裂: X5.0mm ,Y1.0mm 和 ZGT ,可以忽略。1) 若边断裂位
15、于金手指处,严重影响产品的功能,T/P 属不良品; 2) 若边断裂位于线路上,严重影响产品的功能,T/P 属不良品。52.2-7 others:This specification is considered as basic on the products, but details are subject to discussion upon individual customer requirement. 其它:此承认书基本满足产品特性要求,若有其它问题可针对客户实际要求进行协商。3 Reliant Condition 信赖性条件No. Item Test Condition Note 1
16、 High Temperature Operating After exposing at 60 for 64 hours and at normal temperature and humidity for 24 hours. OK 2 Low Temperature Operating After exposing at -20for 64 hours and at normal temperature and humidity for 24 hours.(except for dew gathering) OK 3 High Temperature 、High Humidity Oper
17、ating After exposing at 60 ,80%RH for 64 hours(after dehumidifying in the chamber 60and 50% max.) and at normal temperature and humidity for 24 hours.(except for dew gathering) OK 4 High Temperature Storage After exposing at 60for 64 hours and at normal temperature and humidity for 24 hours. OK 5 Lo
18、w Temperature Storage After exposing at -30 for 64 hours and at normal temperature and humidity for 24 hours. OK 6 High Temperature 、High Humidity Storage After exposing at 60,90%RH for 64 hours and at normal temperature and humidity for 24 hours.(except for dew gathering) OK 7 Thermal Shock.(Non Op
19、erating) After exposing under the conditions between -30(30min) and 70(30min) by 50 cycles (taking out at 70 ) and at normal temperature and humidity for 24 hours.(except for dew gathering) Test sample:4pcs OK 8 Touch panel surface Intensity test Condition:steer ball of dia 30mm, Loading=110g,Height=25cm, to stroke on touch panel surface. Criterion: Normal performance after surface intensity test. There shall be no fragmentation on touch panel surface. OK 4.Attachment 附件Engineering drawing工程图.