《皮带机技术规范-烧结车间》由会员分享，可在线阅读，更多相关《皮带机技术规范-烧结车间（8页珍藏版）》请在金锄头文库上搜索。
1、SUMMARY SPECIFICATION FOR BELT CONVEYORS SINTER PRODUCT烧结物料输送皮带机技术规范Rev. A 18/02/2010This document presents in summary form the basic requirements for the submission of a technical and commercial proposal for the provision of new belt conveyors for sinter product line from Sintering Plant 2 (SP2) Jo
2、o Monlevade to Blast Furnaces A and B. This supply includes a belt conveyor tubular and two way type (transporting in the first way the sinter product, returning with anthracite or coke breeze to SP2.1- General 概述1.1- Sinter Product Line烧结物料输送线Belt conveyors to be supplies for ArcelorMittal should b
3、e designed for handling of sinter product with the following estimates of material to be transferred from SP2 to Blast Furnaces A and B (t / month)从2号烧结车间到A/B高炉的皮带机产能应达到下列要求：Material物料t/month月输送能力（吨）Sinter Product烧结物料198,990TOTAL共计：198,9901.2 Solid Fuel Line固体燃料输送线Belt conveyors to be supplied for A
4、rcelorMittal should be designed to handle anthracite and coke breeze, with the following estimates of materials to be transferred from the screening house (EP) for SP2 (t / month):从筛选房到2号烧结车间的皮带机产能应达到下列要求：Raw Material物料t/month月输送能力Anthracite无烟煤6,487Coke breeze碎焦炭4,338TOTAL共计10,825Piping conveyor TTS
5、P-01 (Pipe conveyor two-way), shall return with anthracite and coke breeze for SP2.TTSP-01 管带机（双圆管型，双向输送）回程段输送无烟煤及碎焦炭至2号烧结车间。1.3 Characteristics of material to be transported:输送物料特性A) Transporting sinter product to Blast Furnaces A and B:输送至A/B炉的烧结物料SINTER PRODUCT (SP2 to Blast Furnaces A and B从2号烧结
6、车间输送至A/B高炉的烧结物料TCSP-01, TCSP-02, TRLSP-01, TCSP-03, TTSP-01(PIPE CONVEYOR), TCSP-04, TCSP-05, TCSP-06, TCSP-07, TCSP-08, TCSP-09, TCSP-10 e TRLSP-02- Material to be transported输送物料*Sinter Product烧结材料- Application应用*This product shall be used in Blast Furnaces A and B用于A/B高炉- Maximum humidity最高湿度%*-
7、Average humidity平均湿度%*- Bulk density物料密度t/m31,70- Maximum size最大尺寸mm100 - Granulometry粒度mm10 * 100- Angle of repose最大安定角grade35- From*B) Transporting anthracite and coke breeze SP2:无烟煤及碎焦炭ANTHRACITE AND COKE BREEZE (SCREEN HOUSE TO SP2)无烟煤及碎焦炭 （筛分房至2号烧结车间） TCAC-02, TCAC-03, Retorno doTTSP-01(PIPE CO
8、NVEYOR-TWO WAY), TCAC-04 E Divisor DVAC-01- Material to be transported输送物料*ANTHRACITE AND COKE BREEZE无烟煤及碎焦炭- Application应用*The anthracite and coke breeze are sent to the installation of proportioning system in SP2, after being employed as part of the load of solid fuel.无烟煤及碎焦炭输送至2号烧结车间的混合搅拌系统，作为固体燃
9、料的一部分- Maximum humidity最高湿度% 20 - Average humidity平均湿度% 10 - Bulk density物料密度t/m30,90- Maximum size最大尺寸mm50 - Granulometry粒度mm0 * 50- Angle of repose最大安定角grade35- From*2- Reference Documentation 参考文件资料DESCRIPTION文件/图纸名称DWG NUMBER图纸编号REV.版别Process Flow Diagram流程图GGEP-12-28-00-909AMain Pipe Rack Plant
10、GGEP-12-33-00-901BMain Pipe Rack -SectionGGEP-12-33-00-902BMain Pipe Rack -SectionGGEP-12-33-00-903BMain Pipe Rack -SectionGGEP-12-33-00-904BMain Pipe Rack -SectionGGEP-12-33-00-905BMain Pipe Rack -SectionGGEP-12-33-00-906BCharging BF-A e BF-BGGEP-12-28-00-901CCharging BF-A e BF-B - SectionsGGEP-12-
11、28-00-902DCharging BF-A e BF-B - SectionsGGEP-12-28-00-903CCharging BF-A e BF-B - SectionsGGEP-12-28-00-904ACharging BF-A e BF-B - SectionsGGEP-12-28-00-905A3- Technical Data 技术参数3.1- Conventional Belt Conveyors TCSP-01, TCSP-02, TRLSP-01, TCSP-03, TCSP-04, TCSP-05, TCSP-06, TCSP-07, TCSP-08, TCSP-0
12、9, TCSP-10 and TRLSP-02Length of Belt Conveyors皮带机长度(to be informed) mElevation提升高度(to be informed) mDesign Capacity:设计能力500 t/hNominal Capacity名义输送能力420 t/hMaterial to be transported输送物料Sinter productWidth of Belt Conveyor皮带机宽度(to be informed) mmSpeed速度1,5 m/sFilling(to be informed)Rolls diametter滚
13、筒直径(to be informed)Drive drum驱动滚筒(to be informed) mmPower capacity on axis轴功率(to be informed)Motor capacity电机功率(to be informed)Walkway走道to be informed) kg/m2Walkway width走道宽度(to be informed)Total weight总重(to be informed) kg Note: To inform the above mentioned data for each belt conveyor注：上述参数将来确定。3.
14、2- Pipe Conveyor TTSP-01(PIPE CONVEYOR-TWO WAY) TTSP-01管带机（双向输送型）Length of Piping Conveyor长度aprox. 690 mElevation提升高度(to be informed) mCurve radius弯曲半径(to be informed)Drive type驱动型式(to be informed)Design Capacity:设计能力500/200 t/hNominal Capacity名义能力420/ 100 t/hMaterial to be transported输送物料sinter product / AnthraciteNominal pipe diameter名义管径(to be informed) mmWidth of Belt Conveyor皮带宽度(to be informed) mmSpeed速度1,5 m/sFilling(to be informed) %Rolls diametter滚筒直径(to be informed)Spac
