《智能照明控制系统外文翻译》由会员分享，可在线阅读，更多相关《智能照明控制系统外文翻译（18页珍藏版）》请在金锄头文库上搜索。
1、本科毕业设计(外文翻译) 毕业设计（外文翻译）题 目 智能照明控制系统 系 （院） 光电信息工程 学生姓名 胡超 学 号 b010405 指导教师 职 称 Intelligent Lighting Control SystemAbstract: This paper describes the development of lighting control systems, intelligent lighting control system mainly System functions and applications are discussed.Key words: intellige
2、nt lighting control bus transfer protocol green energy1、IntroductionWith the continuous development of our economy, rapidly rising living standards, people working and living environment have become increasingly demanding, while the lighting system requirements have become more sophisticated, the tr
3、aditional lighting technology has been a strong blow. On the one hand because of information technology and computer technology changes in lighting technology, providing technical support; the other hand, due to energy shortage, the state more and more attention on energy-saving lighting, new lighti
4、ng control technology to develop rapidly to meet with By energy conservation, comfort, convenience requirements. Lighting control lighting control from the traditional manual method, automated lighting control to todays intelligent lighting control.Intelligent lighting control system is based on com
5、puter-controlled all-digital platform, modular, distributed bus control system, the central processor modules communicate directly through the network bus, the bus makes use of lighting, dimming, blinds, scene control to achieve intelligent, and become a complete bus system. Can be based on changes
6、in the external environment in the device automatically adjust the status of the bus to reach safety, energy conservation, human effects, and can use in the future, in accordance with the requirements of users through the computer re- Way to increase or modify the systems functionality, without havi
7、ng to re-laying of cables, intelligent lighting control system, high reliability, flexible control, lighting control is the traditional way can not be done. 2.1 The basic components and monitoring the contents of the system 2.1.1 System components Intelligent lighting control system is usually dimme
8、r module, switch module, input module, the control panel, liquid crystal display touch screen, smart sensors, PC interface, time management module, hand-held programmer, monitoring computer (need to bridge a large network connection) and other components composition. 1) The basic principle of the di
9、mming module is a microprocessor (CPU) The size of the opening angle control SCR to control the average amplitude of the output voltage to adjust the brightness of light sources. 2) switch module is controlled by the power switch relay output to control light. 3) input module is to accept passive co
10、ntact signals transmitted to the microprocessor via the bus. 4) The control panel is intuitive operation for control of lighting scenes were the parts, which is controlled by a microprocessor, can be programmed to complete a variety of different control requirements. Enter symbol identifying the mic
11、roprocessor, after processing control information sent via the bus, to control the corresponding dimming of the light source module or switching module control the dimming or switch control. 5) The illumination of the sensor interface module for connection to detection, there is detection, motion de
12、tection and other sensors. 6) Time Management module control system with another device on the bus interface to automate tasks and time control. 2.1.2 Monitoring Contents 1) The central control system through the central station and the system software on the switch, dimming, clock, lighting, monito
13、ring and management of the state. 2) switch control, by the central station, local control panel for lights for open, close control. 3) dimming control, by the central station, local control panel for lighting the illumination from zero to maximum control. 4) The time clock control system based on p
14、re-set time for light to open and close control. 5) The astronomical clock control, enter the local latitude and longitude, the system automatically calculate the day of the sunset time, this time to control lighting according to the scene changes. 6) The scene control, through the central station,
15、local control panel programming, lights were on, off, dimming control settings. 7) Remote control, remote control via hand-held control panel with infrared light for the region under the control turned off, dimming control. 8) The illumination system according to the illumination detection sensor detection data (light, light and dark), in accordance with the pre-set parameters to automatically turn on lights, turn off, dimming control. 9) exists, motion control, according to presence detection,
