《广柴8320船用柴油机供货技术条件详解.doc》由会员分享，可在线阅读，更多相关《广柴8320船用柴油机供货技术条件详解.doc（17页珍藏版）》请在金锄头文库上搜索。
1、Delivery Technical Conditions For Model 8320ZCd-8 Marine Diesel Engine 8320-JH115H-01 Guangzhou Diesel Engine Factory 共 16 页第 1 页 编 制资料来源 书 写提出部门 校 对批 准 更改标记处 数许可书号签 字日 期审 核实施日期 CONTENTS 1In General 2Specifications and Main Technical Parameters 3Technical Conditions and Notes 4Delivery Scope 5Packin
2、g 6Factory Warranty 共 16 页第 2 页 1In General 1.1 This delivery conditions specify the main specifications, technical conditions, delivery scope, packing, factory warranty, spare parts, etc. for the 8320ZCd-8 diesel engine. 1.2 When ex-factory, the engines shall be in accordance with the technical req
3、uirements stipulated in this delivery conditions. 1.3 For the details of the fitting data and the ex-factory test records, see the Technical Certificate. 1.4 For the particular requirements from users, such as to take out the output power from the front end of the engine, to modify the dimensions of
4、 connecting the flywheel with the coupling, to use Geislinger flexible coupling, to install the remote control device, etc, they must be stipulated in the delivery contract. 1.5 The torsional calculation must be carried out when projecting the propulsion plant in order to satisfy the requirement of
5、safety and operation. If the front end output shaft is applied, the equivalent system for the torsional calculation shall add relative mass points to ensure the accuracy of calculation. 1.6 When the engine is used as the main propulsion plant with ahead Cooling water temperature before charging air
6、cooler：Tcx=305K(32) Under the reference conditions said above, the power of the engine is 2206kW with the engine speed of 525 r/min and the exhaust temperature at the outlet of each cylinder450. 3.4 The overload rating (1hour) is referred as 110% of rated output providing that the engine is operated
7、 for one hour every 12 hours. 3.5 When the engine is operated at the continuous output power, the difference between the following operating parameters in cylinders shall not be more than the following stipulated value: The compressed air pressure： 2.5 Max. combustion pressure： 4.0 Exhaust temperatu
8、re at the outlet of cylinder： 5.0 3.6 The engine under the cool status with the ambient temperature not less than 5 shall be started up within 10 seconds. 3.7 The air bottle with its air pressure of 2.94MPa can be used for starting the engine for more than 6 times without filling up the air bottle w
9、ith air. 3.8 The engine is allowed to be operated at the load of less than 20% of rated output for a short time when the turbocharger fails to operate due to its default. But at that time, the cover of the air inlet chamber should be removed. 3.9 It shall be allowed that the engine is to be operated
10、 at the load of not more than 50% of rated output for a short time when one of the cylinders is out of firing. 3.10 Users shall take the torsional calculation for the shafting with torsional calculation data of the engine from GDF and the calculating result shall agree to the requirement of CCS. GDF
11、 can do that for the user with extra charge. 3.11 The cost for packing and CCS inspection will be extra charged. 4 Scope of Delivery: 4.1. The attachments installed on the model 8320ZCd-8 diesel engine 共 16 页第 8 页 No.DRG./No.DescriptionQtyRemark 1VTR304-11Turbocharger1 2YT111GVHydraulic governor1 3T
12、ype SZMB-2GTachogenerator2 4 SBL40T Fuel fine filter1400 mesh/inch 5320.27.00Over-speed trip device1 68320.71E.00BLube oil pump1Q56m3/h 7YI320-601A-00Fresh water pump1Q=100m3/h 8KLQ153HAir cooler1GEA 98320.130.00B All the flanges and joints for connecting external pipes to the engine 1 10YI320-602-0
13、0Sea water pump1Q=120m3/h 11320.23.00Oil quality limiter 1 12320.26.00Start speeder 1 13320.29D.00Emergency stop device 1 14320B-200000Injection pump8 15Q8UL-00G2Injector8 4.2 The attachments supplied with the model 8320ZCd-8 diesel engine: No.DRG./No.DescriptionQtyRemark 1BLG30.50B Fresh water cool
14、er with a cooling area of 30m2 1 2BLG45.55A Lube oil cooler with a cooling area of 30m2 1 3SBL125B I T Lube oil filter1264 mesh/inch 4LZFT100GII2 Regulating device for fresh water temperature 1 Be active at the fresh water temperature of 60750C 5LZFT80GII2 Regulating device for lube oil temperature
15、1 Be active at the lube oil temperature of 55700C 6CP300Starting air bottle 2 78320.221A.00 Turbocharger outside Connected pipe assembly 1 8 SBL40T Fuel coarse filter1202 mesh/inch 9320.73.00A Lube oil pressure-regulating valve 1 10320.74.00ALube oil coarse filter1 11320.47.00BLow pressure air bottl
16、e1 12I-100Non-return valve1 13300.146.00 Interlock mechanism for barring flywheel and starting engine 1 14320.57Y.01Marine alarm box1 4.3 List of spare parts supplied with the engine: The spare parts supplied with the engine (1) 共 16 页第 9 页 No.Drg. No.Description Qty.Remark 1 Assembled cylinder head including cylinder head assembly (320.01.00B), test valve and safety valve complete (320.03.00), starting valve complete (320.53.00). 1 set 2320.01.09Valve cap2 3320.01.11BInlet v
