《鞋业常用术语中英文对照》由会员分享，可在线阅读，更多相关《鞋业常用术语中英文对照（17页珍藏版）》请在金锄头文库上搜索。
1、欧维思鞋业博客- http:/ -鞋类常识、鞋业资讯、鞋业百科、鞋店加盟欧维思鞋业博客- http:/ -鞋类常识、鞋业资讯、鞋业百科、鞋店加盟- 1 -鞋业（类）常用术语中英文对照-欧维思鞋业博客 http:/ 阶段P2-P10第二章 技术P7-P15第三章 鞋型转移P16-P17欧维思鞋业博客- http:/ -鞋类常识、鞋业资讯、鞋业百科、鞋店加盟欧维思鞋业博客- http:/ -鞋类常识、鞋业资讯、鞋业百科、鞋店加盟- 2 -第一章：Stage 阶段-欧维思鞋业博客 http:/ I.3.1. Two main sections in Dev. Division 开发的两大部分：1.
2、Development section: explain more in process of new models to make samples in order to introduce market to achieve qty.开发部分：此部分着重于新型体的样品制作，以便可介绍给客户 来争取一定数量的订单。2. Commercialization section: explain more in process of technical after it was developed with Fitting test and Wear test to ensure that all
3、products meet consumers expectations in terms of Fitting, Comfort and Performance.技术部分：开发转移到技术部门，此阶段着重于在开发阶段完成试穿测试, 确保产品在试穿/舒适/功能方面可满足客户的要求后进行的技术工作。I.3.2. Development Stages 开发阶段I.3.2.1. PPR: Pre Prototype Review 初始线条评估1st stage to review all sample products Internally by customer ( Marketing,design
4、er,L.O)For performance shoes, we have Fitting and Wear Test Sample to be sent.* The topics of review are :1. Material 2. Quality 3. Performance4. Price 5. Color 6. Design7. Forecast客人内部（市场销售、设计师、本地客人）对于新鞋型第一阶段之评估。对于功能性鞋型，我们要寄 Fitting test &Wear test试穿样品。此时检查要点如下：1、材料 2、品质 3、功能4、价格 5、颜色 6、设计7、订单预测I.3
5、.2.2. PFR:Prototype Final Review 最后线条评估Final stage to review all sample shoes before introducing the products to the customers. At this time, all key points should be finally decided (Pattern / Design, Color,Price, Material (should be released), etc.).The result of Fitting Test should be considered
6、for PPR meeting as a basic.在全部新鞋型介绍给客户前之最后检查阶段，此时所有要点均需做出最后确定，欧维思鞋业博客- http:/ -鞋类常识、鞋业资讯、鞋业百科、鞋店加盟欧维思鞋业博客- http:/ -鞋类常识、鞋业资讯、鞋业百科、鞋店加盟- 3 -如：纸版、设计、颜色、价位、材料（必须是通过了测试）等等。寄出试样鞋时需附上试穿报告。此时的试穿结果是 PPR 会议之基本考量点。I.3.2.3. SMS1:Salesman Sample 1 销样一Introducing sample to key customers in different country in o
7、rder to achieve quantity of order as per forecast.介绍新鞋型给世界各地之主要客户，以期收到理想的预告订单量。I.3.2.4. SMS2:Salesman Sample 2 销样二Finally introducing sample with Final Changes and Final Material to LineCustomers (world wide) in order to achieve quantity of order as per forecast. If there are changes after this stag
8、e, PM should apply PMR (Product Modification Request.).材料及外观已定案之新鞋型，介绍给世界各地的客户群，以期收到理想的预告订单量。此阶段后若需对鞋型做修正或改变，项目经理需签发产品变更要求之函文。I.3.2.5. SAS: STYLE ACTIVATION SHEET 型体量产确认单SAS should be signed based on below 3 conditions:IES passedThe test of all materials have been passed FST passed.要签订 SAS需有以下三个条件：I
9、ES样品通过全部材料通过测试FST成品鞋测试通过A signed Style Activation Sheet represents an agreement between HQ and LQ that a model and article can be commercialized, produced and delivered.型体量产确认单意味着总部与联络处思想达成一致，有关型体与 ARTICLE跳码试穿样品与全套号码可开始试作。I.4. Development Work Description 开发工作简介I.4.1. Development Tech Package (check
10、 if it is complete) 开发技术资料（检查是否完整）A. SRF 样品单B. Color Drawing 彩图C. Crispin File Crispin文档D. Tech Drawing 技术图纸E. Original Last 原楦头F. Original Pull Over 原试版鞋I.4.2. Sample shoes Material Purchasing 样品鞋材料采购A. Identify new materials (ensure complete material information)欧维思鞋业博客- http:/ -鞋类常识、鞋业资讯、鞋业百科、鞋店加
11、盟欧维思鞋业博客- http:/ -鞋类常识、鞋业资讯、鞋业百科、鞋店加盟- 4 -确定新材料(确保材料信息的完整性)a. Check material name, supplier, detailed description (thickness, emboss)检查材料名称、供货商、详细规格(厚度，纹路等)b. Check supplier existing or new检查是否有该材料的供货商，或是新供货商c. Ask for supplier information (address, contact pe橡胶 on, Tel,Fax, E-mail address), if ther
12、e is a new supplier若是新供货商，则要索取供货商的联系方式 (地址、联系、电话、传真、 E-mail)。B. Order upper materials 采购面部材料a. Ensure all materials have been ordered;确信已经订购了所有材料；b. Ask for material price/unit if it is a new one;若为新材料，需要询价；c. Push material ETD, issue MMR( Material Monitor Report );追踪材料交期, 发送材料控制表；d. If material ETD
13、 is too late, which will cause a sample delay, find substitute material right away under the approval of customer ;如果材料交期太晚，可能导致样品出货的耽搁，在客户许可下立刻找替代材料；e. Ask supplier for color swatch before material delivery;在材料发货前向厂商索要样版材料；f. Ask supplier for material released report.向厂商索要材料测试通过报告。C. Upper material
14、s arrived 面部材料到达a. Check materials according to customer standard, if not match, reject it and ask supplier to improve and remake and resend right away;根据客户标准检验材料，如果不符合，则打掉，并要求厂商立即改进，重做再送；b. Prepare color swatch card. Ensure all information( material name, supplier,color, description and component n
15、ame)on swatch card is complete and correct.Ensure all substitute materials are on swatch card.准备色卡。确保色卡上信息（材料名称、供货商、颜色、规格和部件名称）的完整性和正确性，确保所有的替代材料附在色卡上面。欧维思鞋业博客- http:/ -鞋类常识、鞋业资讯、鞋业百科、鞋店加盟欧维思鞋业博客- http:/ -鞋类常识、鞋业资讯、鞋业百科、鞋店加盟- 5 -D. Order bottom components 采购底部部件a. Check bottom molds existing or not. Track the mold schedule when there is a new mold opened;检查底模是否存在。若开新模具，需要追踪模具进度；b. Place order for every component;定购所有部件；c. Prepare block for testing (only for new mold only).准备测试初胚
