甲缩醛与三聚甲醛合成聚甲氧基二甲醚工艺研究-毕业论文

上传人:飞*** 文档编号:16823925 上传时间:2017-11-09 格式:DOC 页数:39 大小:1.04MB
返回 下载 相关 举报
甲缩醛与三聚甲醛合成聚甲氧基二甲醚工艺研究-毕业论文_第1页
第1页 / 共39页
甲缩醛与三聚甲醛合成聚甲氧基二甲醚工艺研究-毕业论文_第2页
第2页 / 共39页
甲缩醛与三聚甲醛合成聚甲氧基二甲醚工艺研究-毕业论文_第3页
第3页 / 共39页
甲缩醛与三聚甲醛合成聚甲氧基二甲醚工艺研究-毕业论文_第4页
第4页 / 共39页
甲缩醛与三聚甲醛合成聚甲氧基二甲醚工艺研究-毕业论文_第5页
第5页 / 共39页
点击查看更多>>
资源描述

《甲缩醛与三聚甲醛合成聚甲氧基二甲醚工艺研究-毕业论文》由会员分享,可在线阅读,更多相关《甲缩醛与三聚甲醛合成聚甲氧基二甲醚工艺研究-毕业论文(39页珍藏版)》请在金锄头文库上搜索。

1、I摘 要聚甲氧二甲醚是一种高十六烷值含氧柴油调和组分,与柴油调和后可提高混合燃料的十六烷值。它与传统的柴油燃料相比,在理化性能、燃烧性能等特性上,都十分接近,不仅可以直接提到传统柴油进行广泛应用,而且无需对现有的柴油机进行机械结构上的改进,是非常理想的柴油替代燃料,可以改善油品的燃烧性能,提高燃烧效率,大量减少有害物质的排放,具有极大的发展优势。本文介绍了甲醇下游产品甲缩醛和三聚甲醛为原料合成聚缩醛二甲醚的工艺路线。实验在高压反应釜中进行,采用室温离子液体为催化剂。然后分别考察了催化剂用量、反应温度、反应时间、物料配比和反应体系中的压力对该反应的影响,最后得到较佳的工艺条件:催化剂用量为 5

2、wt%,反应温度为 1100C,物料质量配比(三聚甲醛 /甲缩醛)为1.6,通入反应釜 N2 的压力为 2.0MPa,反应时间 4h。关键词:聚甲氧基二甲醚;甲醇;甲缩醛;三聚甲醛IIAbstractPolyoxymethylene dimethylethers(PODE) is a high cetane number and oxygen bearing compromise composite of diesel oil. which can improve cetane number of mixed fuel when blended with diesel oil. On the

3、aspect of physical and chemical performance as well as combustion performance,mixed fuel is great compared with traditional diesel. Not only the additive can extend application of traditional diesel oil, but also the mixed fuel can apply to current mechanical structure. Therefore,it is a very idea s

4、ubstitute for diesel. The additive can improve combustion performance and efficiency of the oil as well as reduce the emission of hazardous matter. The paper introduce the process routine of polyacetal dimethyl ether,which adopted methylal and trioxymethylene. The research reacted in a high-pressure

5、 reactor and adopted ambient temperature ionic liquid as the catalyst. The research also investigated dosage of catalyst, ratio of raw materials, temperature and time of reaction as well as pressure in the system, which will effect the reaction. Finally, we get the optimum process condition: dosage

6、of catalyst is 5% (wt%), ratio of trioxymethylene and methylal is 1.6:1,reaction temperature is 1100C, reaction time is 4h, nitrogen pressure is 2.0MPa. Key words: Polyoxymethylene dimethylethers(PODE);methanol ;methylal; trioxymethyleneIII目 录前 言 .1第一章 文献综述 .21.1 能源与替代燃料发展趋势 .21.1.1 替代燃料能源现状 .21.1.2

7、 甲醇 新型替代能源 .31.2 甲缩醛 值得重视的甲醇下游产品 .41.2.1 甲缩醛的发展意义 .41.2.2 甲醇制甲缩醛及其发展聚甲醛 .41.3 聚甲氧基二甲醚的合成工艺研究 .71.3.1 聚甲氧基二甲醚基本知识简介 .71.3.2 聚甲氧基二甲醚的合成原理及工艺研究 .81.3.3 聚甲氧基二甲醚作为油品添加剂的应用 .121.4 结语 .14第二章 实验部分 .162.1 实验主要药品性质 .162.1.1 甲缩醛 .162.1.2 三聚甲醛 .162.2 实验试剂及仪器 .172.2.1 实验试剂 .182.2.2 实验设备装置 .182.3 实验内容 .192.3.1 实验方法 .19IV2.3.2 实验步骤 .202.3.3 实验进行考察因素 .222.3.4 实验分析方法 .222.4 数据处理方法 .23第三章 结果与分析 .253.

展开阅读全文
相关资源
相关搜索

当前位置:首页 > 研究报告 > 综合/其它

电脑版 |金锄头文库版权所有
经营许可证:蜀ICP备13022795号 | 川公网安备 51140202000112号