iphoneipad等苹果设备针数据线接口定义

上传人:平*** 文档编号:11195569 上传时间:2017-10-12 格式:DOC 页数:5 大小:173.17KB
返回 下载 相关 举报
iphoneipad等苹果设备针数据线接口定义_第1页
第1页 / 共5页
iphoneipad等苹果设备针数据线接口定义_第2页
第2页 / 共5页
iphoneipad等苹果设备针数据线接口定义_第3页
第3页 / 共5页
iphoneipad等苹果设备针数据线接口定义_第4页
第4页 / 共5页
iphoneipad等苹果设备针数据线接口定义_第5页
第5页 / 共5页
亲,该文档总共5页,全部预览完了,如果喜欢就下载吧!
资源描述

《iphoneipad等苹果设备针数据线接口定义》由会员分享,可在线阅读,更多相关《iphoneipad等苹果设备针数据线接口定义(5页珍藏版)》请在金锄头文库上搜索。

1、iphone ipad 等苹果设备 30 针数据线接口定义,大家可能有用iphone, 数据线, ipad, 接口找到 iphone ipad 等苹果设备 30 针数据线接口定义,大家可能有用iPhone 数据线接口定义接口排列方式为:1.2.3.4.5.6.7.8.9.29.30内部焊接点排列为:1 3 5 7 9 11 13 15 17 19 21 23 25 27 292 4 6 8 10 12 14 16 18 20 22 24 26 28 30接口定义为:1 Ground (-) 地 *2 Line Out - Common Ground (-) 线路输出 地*3 Line Out

2、- R (+) R 声道线路输出4 Line Out - L (+)L 声道线路输出5 Line In - R (+) R 声道线路输入6 Line In - L (+) L 声道线路输入78 复合视频输出 (只有彩屏的 ipod 有效)*9 S-Video 色度输出 (只有彩屏的 ipod 有效) 10 S-Video 亮度输出 (只有彩屏的 ipod 有效) 11 Serial GNDRS-232 串口 地12 Serial TxD RS-232 串口 TxD13 Serial RxD RS-232 串口 RxD1415 Ground (-) 地 *16 USB GND (-) USB 电

3、源负极 *1718 3.3V Power (+) 3.3V 电源正极19 Firewire Power 12 VDC (+) 1394 火线 12V 电源 正极 *20 Firewire Power 12 VDC (+)1394 火线 12V 电源 正极*21 Accessory Indicator 附件识别接口 *22 FireWire Data TPA (-) 1394 火线数据 TPA(-)23 USB Power 5 VDC (+)USB 5V 电源 正极24 FireWire Data TPA (+) 1394 火线数据 TPA(+)25 USB Data (-)USB 数据(-)2

4、6 FireWire Data TPB (-)1394 火线数据 TPA(-)27 USB Data (+) USB 数据(+)28 FireWire Data TPB (+) 1394 火线数据 TPB(+)29 FireWire Ground (-) 1394 火线 12V 电源 负极*30 FireWire Ground (-) 1394 火线 12V 电源 负极*iphone 接口定义英文版的:30 pin connector used on the dock station for iPod and iPhone.Available in all Apple iPod MP3 pla

5、yer (iPod 1G, 2G, 3G, 4G, 5G and Nano).This connector is used on iPod (starting from 3rd generation) and iPhone. It is used to connect the iPod or iPhone to various devices: PC (via USB or FireWire IEEE1394), audio amplifier, serial device (controlled via the Apple Accessory Protocol).Pin Signal Des

6、cription 1 GND Ground (-), internaly connected with Pin 2 on iPod motherboard 2 GND Audio and Video ground (-), internaly connected with Pin 2 on iPod motherboard 3 Right Line Out - R (+) (Audio output, right channel) 4 Left Line Out - L(+) (Audio output, left channel) 5 Right In Line In - R (+) 6 L

7、eft In Line In - L (+) 8 Video Out Composite video output (only when the slideshow mode is active on iPod Photo) 9 S-Video Chrominance output for iPod Color, Photo only 10 S-Video Luminance output for iPod Color, Photo only 11 GND Serial GND 12 Tx ipod sending line, Serial TxD 13 Rx ipod receiving l

8、ine, Serial RxD 14 NC 15 GND Ground (-), internaly connected with pin 16 on iPod motherboard 16 GND USB GND (-), internaly connected with pin 15 on iPod motherboard 17 NC 18 3.3V 3.3V Power (+)Stepped up to provide +5 VDC to USB on iPod Camera Connector.If iPod is put to sleep while Camera Connector

9、 is present, +5 VDC at this pin slowly drains back to 0 VDC. 19,20 +12V Firewire Power 12 VDC (+) 21 Accessory Indicator/Serial enable Different resistances indicate accessory type:1KOhm - iPod docking station, beeps when connected10KOhm - Takes some iPods into photo import mode500KOhm - related to

10、serial communication / used to enable serial communications Used in Dension Ice Link Plus car interface1MOhm - Belkin auto adaptor, iPod shuts down automatically when power disconnected Connecting pin 21 to ground with a 1MOhm resistor does stop the ipod when power (i.e. Firewire-12V) is cut. Looks

11、to be that when this pin is grounded it closes a switch so that on loss of power the Ipod shuts off. Dock has the same Resistor.22 TPA (-) FireWire Data TPA (-) 23 5 VDC (+) USB Power 5 VDC (+) 24 TPA (+) FireWire Data TPA (+) 25 Data (-) USB Data (-) 26 TPB (-) FireWire Data TPB (-) 27 Data (+) USB

12、 Data (+)Pins 25 and 27 may be used in different manner. To force the iPod 5G to charge in any case, when USB Power 5 VDC (pin 23) is fed, 25 must be connected to 5V through a 10KOhm resistor, and 27 must be connected to the Ground (for example: pin 1) with a 10KOhm resistor. 28 TPB (+) FireWire Dat

13、a TPB (+) 29,30 GND FireWire Ground (-) NotesSignals with grey background may not exist on some docking stations.Apple serial devices (i.e. iTalk and remote control) communicate with iPod (3rd generation or more) using the Apple Accessory Protocol.The serial connection uses a standard 19200 baud 8N1 protocol (the speed can be increased up to 57600 but tends to become unstable).

展开阅读全文
相关资源
正为您匹配相似的精品文档
相关搜索

最新文档


当前位置:首页 > 行业资料 > 其它行业文档

电脑版 |金锄头文库版权所有
经营许可证:蜀ICP备13022795号 | 川公网安备 51140202000112号