《冷却液msds-875-73_en》由会员分享，可在线阅读，更多相关《冷却液msds-875-73_en（5页珍藏版）》请在金锄头文库上搜索。
1、Page 1/5 Safety Data Sheet according to 1907/2006/EC, Article 31 Printing date 02.07.2009Revision: 02.07.2009 DR * 1 Identification of the substance/preparation and of the company/undertaking Product details Trade name: BLASOCUT 2000 CF HDD Article number: 00875-73 Application of the substance / the
2、 preparation: For industrial use only Manufacturer/Supplier: Blaser Swisslube AG Winterseistrasse 22 CH-3415 Hasle-Regsau +41 (0)34 460 01 01 Further information obtainable from: Product safety dept. Information in case of emergency: Abbreviated dialing: 145 (or: +41 (0)44/ 251 51 51) Toxicologica
3、l Info-Centre CH-Zurich 2 Hazards identification Hazard description: Not applicable. Information concerning particular hazards for human and environment: The product does not have to be labelled due to the calculation procedure of the “General Classification guideline for preparations of the EU“ in
4、the latest valid version. Classification system: The classification is according to the latest editions of the EU-lists, and extended by company and literature data. * 3 Composition/information on ingredients Description: Mixture of mineral oil, emulsifiers, stabilizers and inhibitors Dangerous comp
5、onents: EINECS: 203-489-0 2-Methyl-pentane-2,4-diolXi; R 36/381,0-5,9% Additional information: For the wording of the listed risk phrases refer to section 16. 4 First aid measures General information: No special measures required. After inhalation: Supply fresh air; consult doctor in case of complai
6、nts. After skin contact: Generally the product does not irritate the skin. After eye contact: Rinse opened eye for several minutes under running water. After swallowing: If symptoms persist consult doctor. 5 Fire-fighting measures Suitable extinguishing agents: CO2, powder or water spray. Fight larg
7、er fires with water spray. For safety reasons unsuitable extinguishing agents: Water with full jet Protective equipment: No special measures required. 6 Accidental release measures Person-related safety precautions: Not required. Measures for environmental protection: Do not allow to enter sewers/ s
8、urface or ground water. (Contd. on page 2) EU Page 2/5 Safety Data Sheet according to 1907/2006/EC, Article 31 Printing date 02.07.2009Revision: 02.07.2009 Trade name: BLASOCUT 2000 CF HDD (Contd. of page 1) DR Measures for cleaning/collecting: Absorb with liquid-binding material (sand, diatomite, a
9、cid binders, universal binders, sawdust). Additional information: No dangerous substances are released. 7 Handling and storage Handling: Information for safe handling: The product is not subject to identification regulations under EU Directives and the Ordinance on Hazardous Materials (German GefSto
10、ffV). Observe the general safety regulations when handling chemicals. Information about fire - and explosion protection: No special measures required. Storage: Requirements to be met by storerooms and receptacles: Store only in the original receptacle. Information about storage in one common storage
11、 facility: Do not store together with oxidizing and acidic materials. Further information about storage conditions: Protect from heat and direct sunlight. Storage temperature between -20 C and +40 C. Duration of storage: In closed, original container, at least 12 months. 8 Exposure controls/personal
12、 protection Additional information about design of technical facilities: No further data; see item 7. Ingredients with limit values that require monitoring at the workplace: General indication value for refrigerating lubricants (without obligation): 10 mg/m3. Additional information: The lists valid
13、during the making were used as basis. Personal protective equipment: General protective and hygienic measures: The usual precautionary measures are to be adhered to when handling chemicals. Respiratory protection: Not required. Material of gloves Suitable protective gloves: Nitril gloves, minimum th
14、ickness of 0.3 mm, e.g. Ultranitril type 491. Corresponds to the standards DIN/EN 374-2 and 374-3. Penetration time of glove material The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. Eye protection: Eye protector with side protectio
15、n (framed eyeglasses) EN 166. Body protection: Protective work clothing * 9 Physical and chemical properties (typical data) General Information Form:Liquid Colour:Brown Odour:like oranges Change in condition Melting point/Melting range: Not applicable Boiling point/Boiling range: 300C (DIN 51751) Dr
16、ip point: Pour point 150C (ISO 2592) (Contd. on page 3) EU Page 3/5 Safety Data Sheet according to 1907/2006/EC, Article 31 Printing date 02.07.2009Revision: 02.07.2009 Trade name: BLASOCUT 2000 CF HDD (Contd. of page 2) DR Ignition temperature: 500C (DIN 51794) Self-igniting:Product is not selfigniting. Danger of explosion:Product does not present an explosion
