《imagescamerastir2tir2opertationdoc-ldpnet》由会员分享，可在线阅读，更多相关《imagescamerastir2tir2opertationdoc-ldpnet（13页珍藏版）》请在金锄头文库上搜索。
1、 WARNINGThank you for your confidence in LDP LLC cameras! Please be sure to read the following before operating!Keep camera away from sunshine and moisture.The operating temperature is 10C to +50C (15F to 100F).Never use thinner solvents to clean.Do not obstruct or block cooling vents.Do not attempt
2、 to take apart camera. No user serviceable parts inside. Do not pull in or out the Compact Flash (CF) card when power is on.Do not record to the CF card when the battery is low.Do not power off the camera when the recording to the CF card.IntroductionTIR2 SpecificationsImageGray level image can be d
3、isplayed on the LCD 256-level pseudo-colors image can be displayed NTSC Composite video output of image informationFreeze and SaveImage captured can be frozen. Image can be stored in the CF card with 256 M storage Some parameters such as environment temperature, measurement range, and the original s
4、ignal standard can be stored in the CF card. 8 seconds sound information can be recorded in the CF card 1000 images can be stored Images stored can be x2 and 4x zoomed inX-Nite TIR2 Infrared Thermal Imager Operation Manual- -1ReplayStored images can be replayed Image replayed can be multi-spot measu
5、red, isotherm and area analyzed Voice annotation with the images Image stored In the CF cards and data info can be transmitted by the USB reader, and then analyzed by the software.Temperature MeasurementTemperature measurements are displayed in Celsius. Two temperatures are automatically displayed s
6、imultaneously: Maximum temperature and a user selectable temperature measurement point. User selectable temperature measurement of any spot on the screen is indicated by movable cross, which can be manipulated via camera joystick. Maximum temperature displayed automatically and indicated on LCD view
7、ing screen. Isotherm FunctionMenu SettingUser can set a wide variety of functions displayed on the LCD viewing screen. Temperature calibration: Emissive and reflected ambient. Automatic, or based on user-input Area analysis: Max, Min and accurate temp for selected areas Multi-spot analysis: 4-spot a
8、nalysis for the frozen and stored images. Clock function.X-Nite TIR2 Infrared Thermal Imager Operation Manual- -2TIR2 Technical IndexDetector Type: Microbolometer Uncooled FPADetector Pixels: 320 x 240 pixelsSpectrum Range: 8-14 microns (8,000nm to 14,000nm)Temperature Range: -10C to + 350C (14F to
9、660F)Thermal Sensitivity: 0.08CSpecial Resolution: 1mRadTemperature Accuracy: 1C 1% (-10CX110C)2C 2% (110CX300C)Temperature Measurement Range: 1.: F 0.68: -10 C - +110C 2.: F 2.00: 110 C- + 300CLens: 40 mm Display: 4-inch TFT color LCDImage Storage: 256MB Compact Flash (CF) card can save 1,000 image
10、s, parameters and voice notations.Image replay: Can replay saved images and measure temperatureVoice annotation: Voice notations can be replayed with the imagesInterface: USB CF reader included. Image and voice data may be transferred to PC for subsequent analysis with supplied software.Palette: 256
11、-level pseudo-colors. User can choose from predefined color palettes or create custom palettes.Battery: Rechargeable Sony Lithium Ion Batteries Included with worldwide 100 - 240 volt charger.Battery Life: More than two hours. A “Power“ message will appear at bottom left of LCD X-Nite TIR2 Infrared T
12、hermal Imager Operation Manual- -3screen when battery is low and a voice alarm will notify was well.IRDET1 System StructureStandard fittingIRDET1 IR camera 1Standard Lens 14inch LCD 1Chargeable Battery 2Battery Charger 1256MB CF card1USB reader 1Software for analysis 1Waterproof case1X-Nite TIR2 Inf
13、rared Thermal Imager Operation Manual- -4OPERATIONIdentifying the parts1 72 83 94 105 116 1213 1714 1815 19161 Power11 CF card 2 Reset12 Battery 3 Set13 Cold 4 Play 14 Menu 5 Save15 Aperture 6 Video Out16 Lens Focus 7 Open17 Hot 8 Microphone18 Freeze 9 Grip belt19 LCD10 Joystick 20 Power input20X-Ni
14、te TIR2 Infrared Thermal Imager Operation Manual- -5Explanation of Operation Key1.POWER: Power switch, Press this button to power unit on or off.2.RESET: Press this button after power on to recalibrate camera.3.SET: The camera can measure two heat ranges: xx xx and yy yy. If you do not anticipate needing the high temperature range, you should use the lower temperature band for higher accuracy. To use the higher
