《花样缝纫机刀片运动区间设置》由会员分享,可在线阅读,更多相关《花样缝纫机刀片运动区间设置(2页珍藏版)》请在金锄头文库上搜索。
1、35Maintenance Book03 THREAD TRIMMER TIME ?3-1 The Moving Section of the Mes Setting?區間?1) Fig. 1 .Lay down the sewing machine toward the bed hinge and loosen the screw(2EA) of the stopper for thread trimming drive crank.?机?沽桔?机,?汽緊?驅?曲?固 ?。Fig. 2Fig. 12) Fig. 2 0.5mm .Move the stopper for thread tri
2、mming drive crank in the direction of the arrow and set the distance between the end of the thread trimming drive crank and the end of mes bracket at 0.5mm. ?驅?曲?,?驅?曲? 架?間距?0.5mm。Fig. 33) Fig. 3 0.5mm .Make sure that the end of the thread trimming drive crank is located at 0.5mm inside of the end of the mes bracket.?驅?曲?架?內?0.5mm ?。Mhttp:/ http:/KM-2070 Series364) Fig. 4 .Tighten the screw(2EA) of the stopper for thread trimming drive crank .汽緊?驅?曲?固?。Fig. 4M