减压阀标准汇总

《减压阀标准汇总》由会员分享，可在线阅读，更多相关《减压阀标准汇总（4页珍藏版）》请在金锄头文库上搜索。

1、减压阀标准汇总减压阀标准汇总 标准编号标准编号 标准中文名称标准中文名称 标准英文名称标准英文名称 JB/T10367-2002 液压减压阀 GB/T12245-1989 减压阀性能试验方法 Methods of performance test for pressure reducing valves GB/T12246-1989 先导式减压阀 Pilot-operated reducing valves GB/T12244-1989 减压阀一般要求 General specification for pressure reducing valves GB/T1852-1993 船用法兰铸钢

2、蒸汽减压阀 Marine steel flanged steam pressure reducing valves GB10868-1989 电站减温减压阀技术条件 Specification of the steam converting valve for fossil power stations JB/T7376-1994(2005 复审) 气动空气减压阀 技术条件 JB/T7310-1994(2005 复审) 装载机用减压阀式先导阀 JB/T53361-1994 液压减压阀产品质量分等(试行) JB/T53265-1999 先导式减压阀 产品质量分等 JB/T2205-2000 减压

3、阀结构长度 NF P43-035-2000 建筑阀门.供水减压阀和复合供水减压阀.要求和试验 (Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests.) NF A84-420-1991 气焊设备和有关方法.减压阀入品接头.尺寸 (Equipment for gas welding and allied processes. Pressure regulators inlet connections. Dime

4、nsions.) NF M88-773-1981 商用丁烷容器装置.低压固定调节的家用商品丁烷减压阀 (INSTALLATIONS BURNING COMMERCIAL BUTANE. PRESSURE REGULATOR TRIP,LOW-PRESSURE FIXED FLOW,FOR COMMERCIAL BUTANE FOR DOMESTIC USE.) NF M88-775-1990 装液态碳氢化合物的钢瓶.可移动部分和半移动部分用高压可调减压阀.功能.标记、试验 (LIQUEFIED HYDROCARBONS SYSTEMS IN CYLINDERS. FIXED ADJUSTEME

5、NT,HIGH PRESSURE REGULATOR FOR MOBILE AND SEMI-MOBILE PREMISES. CONSTRUCTION. OPERATION, MARKING,TESTS.) NF M88-737-2003 可运输可再填充液化石油气瓶用减压阀 (Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG).) NF E48-423-2001 液压传动.减压阀、 顺序阀、卸载阀、节流阀和止回阀.(Hydraulic fluid pow

6、er - Pressure-reducing valves, sequence 装配面 valves, unloading valves, throttle valves and check valves - Mounting surfaces.) ANSI/ASSE 1003-1995 家用供水系统用减压阀 (Water Pressure Reducing Valves for Domestic Water Supply Systems) ANSI/ASSE 1046-1990 热膨胀减压阀 (Thermal Expansion Relief Valve) ANSI Z 21.22a-199

7、9 减压阀和真空减压阀 (Pressure Relief Valves and Vacuum Relief Valves) ANSI Z 21.22b-2001 热水供应系统的减压阀 (Relief Valves for Hot Water Supply Systems (same as CSA 4.4b) ANSI/ASTM F 1508-1997 用于蒸汽、 气体和液体设备的角型减压阀规范 (Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services) ASME A112

8、.4.1-1993 热水器减压阀排水管 (Water heater relief valve drain tubes) ASME PTC 25.3-1988 安全和减压阀 (Safety and relief valves) ASTM E 1008-2003 地热和其它高温液体设备用减压阀体的安装、 检验及维修用标准实施规范 (Standard Practice for Installation, Inspection, and Maintenance of Valve-body Pressure-relief Methods for Geothermal and Other High-Tem

9、perature Liquid Applications) 标准编号标准编号 标准中文名称标准中文名称 标准英文名称标准英文名称 ASTM F 1795-2000 空气或氮气系统用减压阀标准规范 (Standard Specification for Pressure-Reducing Valves for Air or Nitrogen Systems) ASTM F 1565-2000 蒸汽设备用减压阀标准规范 (Standard Specification for Pressure-Reducing Valves for Steam Service) ASTM F 1508-1996 用

10、于蒸汽、 气体和液体设备的角型减压阀标准规范 (Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services) ASTM F 1370-1992 船上给水系统用减压阀 (Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard) BS EN 1567-2000 建筑物阀门.减压阀和组合减压阀.要求和试验 (Building valves - Water pre

11、ssure reducing valves and combination water reducing valves - Requirements and tests) BS ISO 5781-2000 液压传动.减压阀、 顺序阀、卸荷阀、节流阀和止回阀.安装面 (Hydraulic fluid power - Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces) BS ISO 6264-1998 液压传动.减压阀.装

12、配面 (Hydraulic fluid power - Pressure-relief valves - Mounting surfaces) prEN 14071-2000 液化石油气（LPG）罐的减压阀 辅助设备 Pressure relief valves for LPG tanks - Ancillary equipment BS 6283-2-1991 热水系统中使用的安全和控制装置.压力范围从 1bar到 10bar 温度减压阀规范 (Safety and control devices for use in hot water systems - Specifications f

13、or temperature relief valves for pressures from 1 bar to 10 bar) BS 6283-4-1991 热水系统中使用的安全和控制装置.第4部分:最大供给压力为 12bar,标准尺寸包括 DN50 的微量绷紧减压阀规范 (Safety and control devices for use in hot water systems - Specification for drop-tight pressure reducing valves of nominal size up to and including DN 50 for sup

14、ply pressures up to and including 12 ba) DIN EN 13953-2003 液化石油气(LPG)用可运输的可再充式储气瓶的减压阀 (Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG); German version EN 13953:2003) DIN EN 1567-2000 建筑阀门.水减压阀和组合水减压阀.要求和试验 (Building valves - Water pressure reducing val

15、ves and combination water pressure reducing valves - Requirements and tests; German version EN 1567:1999) JIS B8652-2002 比例电动液压减压阀及安全阀的试验方法 (Test methods for electro-hydraulic proportional pressure relief valves and electro-hydraulic proportional pressure reducing and relieving valves) JIS F0504-198

16、9 船上机械装置用减压阀的应用和压力调节 (Application and setting pressure of relief valves for ships machinery) UL 1478-1995 消防泵减压阀 (Fire pumps relief valves ) UL 1468-1995 防火设备用直接控制的减压阀和压力控制阀 (Direct acting pressure reducing and pressure restricting valves ) JIS B8666-2001 液压动力.减压阀.安装表面 (Hydraulic fluid power - Pressure-relief valves - Mounting surfaces) JIS B8372-1994 气动装置用减压阀 (PRESSURE REDUCING VALVES FOR PNEUMATIC USE) JIS B8664-2001 液压动力.压力控制阀(不包括减压阀)、顺