《ptc creo支持平台汇总》由会员分享，可在线阅读，更多相关《ptc creo支持平台汇总（2页珍藏版）》请在金锄头文库上搜索。
1、PTC Creo Future Platform Support Summary Introduction This document covers the platform support plans for PTC Creo Parametric, PTC Creo Direct, PTC Creo Layout, PTC Creo Schematics, PTC Creo Options Modeler, and PTC Creo Simulate. This document contains forward looking information that is subject to
2、 change without notice. Check for new versions of this document on a regular basis. Note that this document provides only a summary of major platform support direction, and does not specify all details of PTC Creo future platform support. As a result, we recommend that you check with PTC to confirm
3、your understanding prior to using this information for planning purposes. If you need for information that is not contained within this document, please open a PTC tech support request. For complete details on platform support and for certified configurations for currently released versions of PTC C
4、reo and related PTC products, see the PTC Platform Support Page. For additional support information, see the PTC Creo Support Center. PTC recommends customers planning on upgrading to Creo 3.0 should consider moving to 64-bit hardware as 32-bit platforms will not allow you to experience the best Cre
5、o performance and may not be supported on future versions of Creo. Platform Support by Version This section summarizes the platform support for the most recent and future versions of PTC Creo. The information is in a table format to permit easier comparison between versions. Creo Elements/Pro 5.0 PT
6、C Creo 2.0 PTC Creo 3.0 Client Operating Systems Windows XP Professional x64 Edition (Base OS, Service Pack 2) Windows XP Professional Edition (Base OS, Service Pack 1, 2 and 3) YES YES NO Windows XP Home Edition (Base OS, Service Pack 1, 2 and 3) YES NO NO Windows Server 2008 R2 64 bit Edition 1 YE
7、S YES NO Windows Vista Business 32 and 64 bit Edition Windows Vista Ultimate 32 and 64 bit Edition Windows Vista Enterprise 32 and 64 bit Edition (Base OS, Service Pack 1 and 2) YES NO NO Windows 7 Professional 32 and 64 bit Edition Windows 7 Ultimate 32 and 64 bit Edition Windows 7 Enterprise 32 an
8、d 64 Edition (Base OS, Service Pack 1) YES (from M140) YES YES Windows 8 32 and 64 bit Edition Windows 8 Pro 32 and 64 Edition NO YES (from M030) YES Windows 8.1 32 and 64 bit Edition NO YES (from M100) YES Windows 8.1 Update (KB 2919355) 32 and 64 bit Edition NO YES (from M120) YES Windows Server 2
9、012 R2 2 NO Planned for M150 Planned for M030 Sun Solaris 10 64 bit (Intel and AMD Opteron) YES NO NO Microsoft Browser Support 3 Internet Explorer 6.0 SP1+ YES YES NO Internet Explorer 7.0 YES YES NO Internet Explorer 8.0 YES YES YES Internet Explorer 9.0 YES (from M110) YES YES Internet Explorer 1
10、0.0 NO YES (from M080) YES Internet Explorer 11.0 NO YES (from M100) YES Development Environment for Creo TOOLKIT and Object TOOLKIT Microsoft Visual Studio .NET 2008 Microsoft Visual Studio .NET 2010 Microsoft Visual Studio .NET 2012 with Toolset v110_xp Sun Studio 12 (C, C+) JLink - Java Version J
11、RE 1.6.0_02 JRE 1.6.0_13 JRE 1.7.0_25 Microsoft Office Microsoft Excel 2010 (base version and service packs) Microsoft Excel 2010 (base version and service packs) Microsoft Excel 2010 (base version and service packs) Graphics Cards Use of PTC Certified or Supported configuration recommended. Use of
12、PTC Certified or Supported configuration recommended. Graphics card which support at least OpenGL 3.1 recommended. Use of PTC Certified or Supported configuration recommended. Graphics card which support at least OpenGL 4.0 recommended. 1. Windows Server 2008 R2 64 bit Edition is not supported for P
13、TC Creo Schematics 2. Windows Server 2012 R2 is supported in batch mode only, no graphics support. 3. Please also review the browser support for Windchill. Related Documents PTC Creo and PTC Windchill Compatibility Roadmap PTC Windchill Future Platform Support Summary Hardware Notes - Creo 3.0 Parametric, Direct, Layout, Schematics, Options Modeler, Simulate Hardware Notes - Creo 2.0 Parametric, Direct, Layout, Schematics, Options Modeler, Simulate Hardware Notes - Pro/ENGINEER Wildfire 5.0 and Creo Elements/Pro 5.0 PTC License Server: FLEXnet Publisher
