AUMUND盘运机供货范围

《AUMUND盘运机供货范围》由会员分享，可在线阅读，更多相关《AUMUND盘运机供货范围（6页珍藏版）》请在金锄头文库上搜索。

1、淅川中联改造项目供货范围淅川中联改造项目供货范围 第1页共6页 供货范围供货范围 Scope of supply Item1.0 1 AUMUND-Deep Drawn Pan Conveyor KZBQ250800/300/4 项目1.0 1 台奥蒙德深盘式输送机 型号 项目1.0 1 台奥蒙德深盘式输送机 型号 KZBQ250800/300/4 Centre distance : 108.344m 中心距 Conveyor system horizontal : 88.728m 输送系统水平距离 Conveyor system vertical lift : 56.950m 输送系统垂直距

2、离 Angle of inclination : 39 倾斜角度 Bulk density : 1.45t/m3 容重 Material : Clinker 输送物料 熟料 Conveying capacity norm./max. : 正常160t/h ，最大400t/h 输送能力 正常/最大 奥蒙德进口部分奥蒙德进口部分 AUMUND - Scope of Supply ( Imported from Germany ) Conveying elements- design for Double chains The torsion-resistant pans overlap in a

3、contact-free manner and form a closed surface at the return stations as well. Stiffening beads and sealing lips being provided at the base plate and at the side walls prevent not only deformation but also the entry of fines in the overlapping area. Rollers with forged and hardened roller bodies are

4、attached at separate brackets by means of a plug-in axle with bolted connection and can be individually removed. The rollers are supported in ball bearings. They are provided with several dust seals (labyrinth seals) and have a life time lubrication. 输送元件-双链结构设计 输送元件-双链结构设计 单链结构设计 抗变形料盘的非接触式搭接并在返向回转

5、站处也构成密封表面在底板和侧板安装有加 强筋和密封搭接,不仅可防止料盘变形而且防止在料盘搭接区域的细料进入。锻制滚轮和硬化滚轮体 通过螺栓联结方式的插入轴联接在不同的支撑架上，并可单独拆卸。滚轮由滚动承轴支撑，滚轮配 有若干防尘密封件（迷宫式密封）并可终身滑润。 Drive Sprocket Component Exchangeable toothed segments for sprocket is supplied which can also be exchanged without disassembly of conveying elements . 为驱动链轮配有可更换的齿状扇形块

6、，在更换时不用将输送链条部件拆开。 Tension Sprocket Component Exchangeable toothed segments for sprocket is supplied which can also be exchanged without disassembly of conveying elements . 为张紧链轮配有可更换的齿状扇形块，在更换时不用将输送链条部件拆开 1 Emergency stop 淅川中联改造项目供货范围淅川中联改造项目供货范围 第2页共6页 Two emergency switches are arranged on both si

7、des of the conveyor which can be actuated by means of the emergency pull ropes being arranged along the conveyor. 1 套紧急制动装置 1 套紧急制动装置 两个制动开关设在输送机两侧，安装在输送机两侧的拉绳可控制其运行。 1 Speed control A contact-free proximity switch serves as motion indicator and is arranged at the take-up station. This allows a perm

8、anent control of conveyor function in the control centre. The required cabling is not included in the AUMUND-scope of supply. 1 个速度控制器 无接触式接近开关安装在张紧装置处,作为速度指示器,在中控室可长期控制输送机 的运行.联接至中控室的长电缆不包括在卖方的供货范围内. Fixing material The fixing material for the installation of the parts supplied by AUMUND consists o

9、f DIN fixing screws or foundation pegs is part of the AUMUND scope of supply. 固定材料 由AUMUND供货部份的安装用固定材料 ，包括欧洲DIN标准的固定螺栓或地脚螺栓。 SCOPE OF SUPPLY 供货范围供货范围(奥蒙德国内交货部分奥蒙德国内交货部分) 奥蒙德公司国内供货范围 奥蒙德公司国内供货范围 AUMUND-Scope of Supply (manufactured in China) 1 驱动装置钢结构 1 驱动装置钢结构 卖方提供驱动装置壳体焊接和螺栓联结钢结构。可提供具有设计成角状的侧向开口和螺栓

10、联结的防 尘盖板，用于承受链轮。前端装有螺栓紧固板控制物料流动。机头盖端配有法兰,用于连接由用户提 供的除尘设备。 1 Drive station Steel structure A welded and bolted steel structure. Lateral openings being designed as angular frames and equipped with bolted and dust-tight covers are provided to control the sprockets. A dust-tight door with screw-type loc

11、k is arranged at the front to control material flow. The cover hood is equipped with a flange for connection to a de dusting equipment to be supplied by others. 1 张紧装置钢结构 1 张紧装置钢结构 采用型钢焊接和螺拴联结的钢结构并可自行支撑, 和运行轨道联结, 导向装置与张紧轴承适配包括 张紧轴和弹簧张紧丝杠. 1 Take-up station Steel structure A welded and bolted steel s

12、tructure made from profile steel and self supporting , connected to the runways, with guide arrangement to accommodate the tension bearings including shaft and the tension spindle with spring. 头部部件 包括传动轴整体不包括链轮 头部部件 包括传动轴整体不包括链轮 传动轴整体包括在供货范围内,驱动轴承由配有自调心的滚动轴承和防尘、密封法兰轴承支撑,并在 现场联结于头部钢结构。驱动轮毂通过键和驱动轴联结.

13、Drive shaft complete without sprocket Drive shaft will be supported in dust-tight, enclosed flanged bearingsbeing equipped with self- aligning roller bearings which are bolted to drive steel structure on site. Drive hub is mounted on key connection 淅川中联改造项目供货范围淅川中联改造项目供货范围 第3页共6页 尾部部件 包括张紧轴整体不包括链轮 尾

14、部部件 包括张紧轴整体不包括链轮 张紧轴整体包括在供货范围内.张紧轴承是防尘的、密封的,调心滚动轴承与尾轴适配, 并在现场联 接于头部钢结构。张紧轮毂通过键和传动轴联接。丝杆结构的张紧装置可确保尾轴对中性,安装在螺 杆两侧的螺旋丝杆可确保自动张紧调节. Tension shaft complete without sprocket Tension shaft are supplied complete without sprocket. The tension bearings are of the dust-tight, enclosed type and equipped with sel

15、f-aligning roller bearings to accommodate the tail shaft which are bolted to the tension steel structure . The tension hub is mounted on the tension shaft by feather key connection. A spindle tensioning device ensures alignment of tail axle. Helical springs, which are arranged on the spindles, guarantee an automatic tension regulation. 输送链条输送链条 高精度和耐磨链条装配硬化销轴和套筒并通过硬化卡簧联结和螺栓联结于料盘. Conveying chain The highly precisely and wear resistant link chains being equipped with hardened pins and bushes are bolted to the pans by means of bended on bra