《用于锂离子电池的石墨烯导电剂缘起、现状及展望》由会员分享，可在线阅读，更多相关《用于锂离子电池的石墨烯导电剂缘起、现状及展望（20页珍藏版）》请在金锄头文库上搜索。
1、用于锂离子电池的石墨烯导电剂:缘起、现状及展望 苏方远 唐睿 贺艳兵 赵严 康飞宇 杨全红 清华大学深圳研究生院深圳市石墨烯重点实验室 中国科学院山西煤炭化学研究所中国科学院炭材料重点实验室 天津大学化工学院 摘 要： 石墨烯具有很高的电导率及柔性、二维、超薄的结构特性, 是兼具“至薄至柔至密”特征、极具潜力的锂离子电池导电剂.使用在锂离子电池中, 通过与活性物质“面-点”接触, “至薄至柔”的石墨烯具有非常低的导电阈值使用量较少时就可以有效提高电极的电子电导率, 大幅降低作为非活性物质的导电剂使用量, 实现电池活性物质的“至密构建”, 有效提高电池的体积能量密度.然而, 石墨烯的二维平面结构
2、又会对电极内部锂离子的传输产生“位阻效应”, 影响高倍率条件下锂离子电池性能的发挥.因此, 在使用石墨烯导电剂时, 需要结合最终锂离子电池设计需求 (能量或功率性能优先) , 综合考虑其对电子/离子传输过程的影响, 提出石墨烯导电剂的设计方案.本文从石墨烯及其用作导电剂的特点、影响石墨烯导电剂使用的关键因素等方面出发, 详细评述了石墨烯导电剂的应用缘起和研究现状, 并对石墨烯的未来应用趋势和产业化前景进行了展望.关键词： 石墨烯; 导电剂; 锂离子电池; “面-点”接触模式; 位阻效应; 至柔至薄至密; 作者简介：杨全红, E-mail: 收稿日期：2017-06-13基金：国家自然科学基金
3、(51525204, 51672156) Graphene conductive additives for lithium ion batteries: Origin, progress and prospectSU FangYuan TANG Rui HE YanBing ZHAO Yan KANG FeiYu YANG QuanHong Shenzhen Key Laboratory for Graphene-based Materials, Graduate School at Shenzhen, Tsinghua University; School of Chemical Engi
4、neering and Technology, Tianjin University; Abstract： This paper gives a critical review on the scientific origin, current research progresses and application prospects of graphene conductive additives applied in lithium-ion batteries (LIBs) and emphasizes that the electron transport (enhancement of
5、 electron conductance by graphene) and ion diffusion (steric effect of graphene for ion diffusion) should be considered comprehensively for a real mass application. Due to the high electronic conductivity, two-dimensional planar geometrical structure and the “most flexible and thinnest” character, o
6、ur group proposed that graphene is a very promising conducting additive for LIBs. Through “plan-to-point” contact model with active material particles, graphene can improve the electronic conductivity of the electrode laminate with much less addition fraction, and hence enhance the energy density of
7、 the LIBs. Therefore, graphene shows much better performance than other types of conductive additives, such as carbon black, conducting graphite and even carbon nanotube. Due to the size difference of active material particles, the optimized addition fraction of graphene is different. For example, 2
8、 wt% of graphene works best for Li Fe PO4, while the most suitable addition amount of graphene in Li Co O2 is only 1 wt%. At the same time, graphene and conducting carbon black can work together to construct a much more efficient conductive network. This kind of binary conductive additive can build
9、high speed pathway for electron both in long and short distance (that is, electrons can transport in the whole electrode and gain access to the whole surface of the active material particle simultaneously) , and further improve the electrochemical performance of active materials. Hence, hybrid mater
10、ial containing graphene and carbon black is fabricated to use directly as a novel binary conductive additive. Other than the improvement of the electron conduction, the introduction of graphene brings a bottleneck for its application in LIBs, which has been reported by our group in 2012 based on a 1
11、0 Ah LIB using graphene as conductive additive, that is, the steric effect for lithium ion diffusion. Ion diffusion in the porous electrode will be retarded by planar graphene because it is very hard to penetrate through the hexagonal carbon ring for lithium ions. Many efforts have been made by our
12、group to illustrate this effect. We found that it is the thickness and tortuosity of the electrode laminate that determines and the situation varies with different active material. When it comes to Li Fe PO4, the ion steric effect is not obvious when the electrode is thin (e.g. thinner than 26 m) .
13、When the electrode sheet is thicker (39 m) , the rate performance of Li Fe PO4 becomes worse when the graphene addition increases. However, when it comes to Li Co O2, which is large in particle size, the steric effect from graphene disappears. It can be attributed to the pore tortuosity of the elect
14、rode. Since the particle size of Li Co O2 is much larger, the electrode is not as tortuous as that of Li Fe PO4 electrode. Therefore, ions diffuse easily along the electrode thickness direction. Nevertheless, it should be noted that the steric effect in Li Fe PO4 electrode can be elimated by introdu
15、cing pores on the surface of graphene or making ribbon-like graphene to provide more diffusion path for lithium ions in the porous electrode. From the practical points, the dispersion of graphene in the active materials is a vitally important but a tough job. In order to construct an efficient condu
16、cting network, graphene should be well dispersed and cover every particle of the active material in the electrode. Agglomeration of graphene will not construct a good conducting network, and even bring adverse effects for the ion diffusion. Normal mixing equipments alone cannot ensure good dispersion of graphene, and ultrasonication is an efficient pre-treatment step. New techniques with higher dispersion efficiency are expected to realize really uniform and
