《数据采集外文翻译》由会员分享，可在线阅读，更多相关《数据采集外文翻译（16页珍藏版）》请在金锄头文库上搜索。
1、大连交通大学信息工程学院毕业设计(论文)外文翻译学生姓名 1111 专业班级 自动化 0111 班 指导教师 1111 职 称 11111 所在单位 电气工程系 教研室主任 完成日期 1111 年 4 月 13 日大连交通大学信息工程学院 2012 届本科生毕业设计（论文）外文翻译1Date AcquisitionDate acquisition systems are used to acquire process operating data and store it on secondary storage devices for later analysis. Many of the
2、data acquisition systems acquire this data at very high speeds and very little computer time is left to carry out any necessary, or desirable, data manipulations or reduction. All the data are stored on secondary storage devices and manipulated subsequently to derive the variables of interest. It is
3、 very often necessary to design special purpose data acquisition systems and interfaces to acquire the high speed process data. This special purpose design can be an expensive proposition.Powerful mini- and mainframe computers are used to combine the data acquisition with other functions such as com
4、parisons between the actual output and the desirable output values, and to then decide on the control action which must be taken to ensure that the output variables lie within pre-set limits. The computing power required will depend upon the type of process control system implemented .Software requi
5、rements for carrying out proportional, ratio or three term control of process variables are relatively trivial , and microcomputers can be used to implement such process control systems . It would not be possible to use many of the currently available microcomputers for the implementation of high sp
6、eed adaptive control systems which require the use of suitable process models and considerable on-line manipulation of data.Microcomputer based data loggers are used to carry out intermediate functions such as data acquisition at comparatively low speeds, simple mathematical manipulations of raw dat
7、a and some forms of data reduction. The first generation of data loggers, without any programmable computing facilities, were used simply for slow speed data acquisition from up to one hundred channels. All the acquired data could be punched out on paper tape or printed for subsequent analysis. Such
8、 hardwired data loggers are being replaced by the new generation of data loggers which incorporate microcomputers and can be programmed by the user. They offer an extremely good method of collecting the process data, using standardized interfaces, and subsequently performing the necessary manipulati
9、ons to provide the information of interest to the process operator. The data acquired can be analyzed to establish correlations, if any, between process variables and to develop mathematical models necessary for adaptive and optimal process control.The data acquisition function carried out by data l
10、oggers varies from one logging system to another. Simple data logging systems acquire data from a few channels while complex systems can receive data from hundreds, or even thousands, of input channels distributed 大连交通大学信息工程学院 2012 届本科生毕业设计（论文）外文翻译2around one or more processes. The rudimentary data
11、loggers scan select number of channels, connected to sensors or transducers, in a sequential manner and the data are recorded in digital format. A data logger can be dedicated in the sense that it can only collect data from particular types of sensors and transducers. It is best to use a non-dedicat
12、ed data logger since any transducer or sensor can be connected to the use of appropriate signal conditioning modules.Microcomputer controlled data acquisition facilitates the scanning of a large number of sensors. The scanning rate depends upon the signal dynamics which means that some channels must
13、 be scanned at very high speeds in order to avoid aliasing errors while here is very little loss of information by scanning other cannels at slower speeds. In some data logging applications the faster channels require sampling at speeds of up to 100 times per second while slow channels can be sample
14、d once every five minutes. The conventional hardwired, non-programmable data loggers sample all the channels in a sequential manner and the sampling frequency of all the channels must be the same. This procedure results in the accumulation of very large amounts of data, some of which is unnecessary,
15、 and also slows down the overall effective sampling frequency. Microcomputer based data loggers can be used to scan some fast channels at a higher frequency than other slow speed channels.The vast majority of the user programmable data loggers can be used to scan up to 1000 analog and 1000 digital i
16、nput channels. A small number of data loggers, with a higher degree of sophistication, are suitable for acquiring data from up to 15,000 analog and digital channels. The data from digital channels can be in the form of Transistor-Transistor Logic or contact closure signals. Analog data must be converted into digital format before it is recorded and requires the use of suitable analog to digital converters (ADC). The characteris
