《2019承包商安全培训课件》由会员分享，可在线阅读，更多相关《2019承包商安全培训课件（15页珍藏版）》请在金锄头文库上搜索。
1、承包商安全培训,2019. 3. 12,PURPOSE,目的 保护格雷斯承包商的健康和安全. 确保承包商遵守格雷斯安全要求并承担相关责任.,格雷斯安全方针,格雷斯安全方针规定: 所有伤害能被预防. 安全工作是所有雇员工作的前提. Management must be the leaders in preventing injuries by providing a safe work environment, training and immediate follow-up on any unsafe conditions or actions. Everyone is responsible
2、 for preventing injuries to themselves and others. All operating exposures can be safeguarded. Training employees to work safely is essential. Prevention of personal injuries is good business,承包商职责,The contractor is fully responsible that his supervisors and workers strictly abide by all applicable
3、safety rules and regulations. Any contract worker who violates safety rules and regulations is liable to instant dismissal or removal from Grace premise. The contractor shall be the only party responsible for any accident resulting from neglecting and/or infringing safety rules and regulations.,Safe
4、ty Awareness,As you approach each activity or situation, use the following safety cycle to help you evaluate the potential risk of your task. The safety cycle will help you recognize and eliminate unsafe acts and unsafe conditions that could occur as you do your job. DECIDEMake safety a top priority
5、 STOPGive your full attention to the work area OBSERVELook for unsafe acts and unsafe conditions THINKConsider how safety will be affected by what you have observed ACT Apply good judgement to eliminate unsafe acts and unsafe conditions Rushing through a job doesnt save time in fact it can lead to a
6、 lot more lost time than the few seconds it takes to use the safety cycle. Stop Unsafe Acts Expect the Unexpected Prevent Injuries,Security,All contractors and their workers shall apply for appropriate gate passes before entering Grace. Grace reserves the right to reject any such applications for se
7、curity reasons. Gate passes must be worn conspicuously by contractors in Grace at all the time,General Safety,Smoking Smoking is only allowed at the designated smoking areas. Photograph Taking Photograph taking of any kind is not allowed in Grace without prior authorisation from the second line supe
8、rvisors. All cameras must be deposited at security guard house. If photograph taking is authorised by Grace, the photographer must not take any photograph beyond the area approved. Light Hot Work Permit is required if photograph is taken in the process area. Traffic Speed limit: 15 km/hours. Park yo
9、u vehicle at designated parking area.,Personal Protective Equipment (PPE),Minimum PPEs at Process Areas and Tank Farm: Safety shoes, safety glasses and hard hats Other PPEs Ear protector is applicable at any areas where noise level is above 85 dB(A) Face shield shall be used when transferring corros
10、ive chemicals or doing grinding job. Welding helmet shall be worn when a contractor perform welding work. Proper respirator shall be used when contractor are exposed to respiratory hazards such as dusts or chemical vapors. Fall protection shall be used when contractors work at height of 1.2 meters o
11、r above without proper handhold or foothold. Proper safety gloves shall be used when handling chemicals, abrasion hazards, electrical hazards Others as required on the job basis All PPEs shall be in good conditions,Incident Reporting,It is the Grace policy to report all incidents at Grace premises.
12、Those incidents includes: Loss time incidents/recordable incidents First aid cases Environmental incident (any chemical release or spills) Fire incident Near miss Any other incidents result in property loss of the facility. All incidents shall be reported to Grace Plant Manager. Proper incident inve
13、stigation shall be followed up.,Emergency Response,An emergency alarm (sounding of an alarm in the building/plant) and PA system are used for all emergencies: fire, medical or environmental All personnel must be prepared to respond properly in evacuation situations at the site. When You Discover an
14、Emergency such as a fire, medical, or environmental incident occurs in your building or area, you must: If you are trained and you are not in danger, put out fire immediately Report to your superior immediately Activate alarming device (break glass) Call the Site Incident Commander (if you dont know
15、, call security) Alert all personnel in the area Evacuate the area,Emergency Response,When You Hear an Emergency Alarm Secure equipment per local rules (if possible) Leave area as specified Report to the designated assembly point as quickly as possible in accordance with the sites Emergency Plan. As
16、sembly Points Outside of front gate Next to back gate Grace employee who sponsors the contractor is responsible for head counting for the contractors.,PERMITS & LOCKOUT/TAGOUT,Contractors must strictly abide by Grace Work Permit System for all construction, maintenance and repair work in Grace to ensure safety of all personnel, prevent the occurrence of fire or accident, and protect plant and process equipment. All contractors must obtain a proper work permit/s prior to the starting of their j
