《化学驱油技术相关进展》由会员分享，可在线阅读，更多相关《化学驱油技术相关进展（8页珍藏版）》请在金锄头文库上搜索。
1、Experiment Two:Preparation and property of water shutoff agent,Kang Wanli,2011.3,1. Learn ways of preparation of several water shutoff agents 2. Master formation mechanisms and applied conditions of several water shutoff agents.,One. Experimental purposes,Two. Experimental principles,Commonly used w
2、ater shutoff agents involve the following four types: gel, jelly, precipitation-type, suspension-type. Gel: It turns from macromolecular solution(eg. zirconium gel).The properties are characterized by gelling time and gel strength. Jelly: It turns from collosol(eg. Silicagel). The properties are cha
3、racterized by gelation time and jelly strength. Precipitation-type water shutoff agent: water glass- calcium chloride is very common in oil field . Suspension-type water shutoff agent: A thick disperse system is formed by solid particle dispersed in the solution.,Three. Instruments and Chemicals,1.I
4、nstruments 100ml beaker; 10ml capped test tube with scale; 5ml and 25ml measuring cylinder; glass rod. 2.Chemicals: Polyacrylamide; Zirconium oxychloride; Sodium silicate; Calcium chloridie; Hydrochloric acid; Clay.,Four. Experiment steps：,1.Add 20ml Polyacrylamide (HPAM) of the same concentration t
5、o three 100ml beakers separately, then adjust the PH value of cross-linking solution: Add nothing to the first beaker Add 6 drops 1% Hcl to the second beaker Add 7 drops 1% NaOH to the Third beaker,Determine the PH value of cross-linking solution in the three 100ml beaker separately with indicator s
6、trips, and add 2ml Zirconium oxychloride of certain concentration to the three beakers separately, then observe and record the condition of the gelation (description of intensity: completely stir up,partly stir up,cannot stir up ),2.Take three 10ml graduated test tubes with stopper, Firstly, add 5ml
7、 water glass with the concentration of 10% respectively, and then add different drops of 10% hydrochloric acid, observe and record the gel time and strength. Start to record the time when adding the first drop of hydrochloric acid. 3. Add 5ml 10% water glass in one test tube and 10% Calcium chloride
8、 drop by drop . Observe and record the experimental phenomena in the meantime. 4. Take three 10ml graduated test tubes with stopper. Add 10ml clay suspensions and the different concentrations of HPAM respectively. Observe and record the experimental phenomena. (Inaction),FiveExperimental results processing,Express the experimental phenomena and result in tabular form and data, and explain the experimental phenomena. The original record will be attached to the back of Lab report.,
