《精编》LTE终端协议一致性测试研究技术报告

上传人:tang****xu2 文档编号:133273022 上传时间:2020-05-25 格式:DOC 页数:6 大小:186.24KB
返回 下载 相关 举报
《精编》LTE终端协议一致性测试研究技术报告_第1页
第1页 / 共6页
《精编》LTE终端协议一致性测试研究技术报告_第2页
第2页 / 共6页
《精编》LTE终端协议一致性测试研究技术报告_第3页
第3页 / 共6页
《精编》LTE终端协议一致性测试研究技术报告_第4页
第4页 / 共6页
《精编》LTE终端协议一致性测试研究技术报告_第5页
第5页 / 共6页
点击查看更多>>
资源描述

《《精编》LTE终端协议一致性测试研究技术报告》由会员分享,可在线阅读,更多相关《《精编》LTE终端协议一致性测试研究技术报告(6页珍藏版)》请在金锄头文库上搜索。

1、LTE终端协议一致性测试研究(第六分册)1 范围2 规范性引用文件下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件,仅所注日期的版本适用于本文件。凡是不注日期的引用文件,其最新版本(包括所有的修改单)适用于本文件。3411 一般性测试11.1 SMS短信 11.1.1 UE接收短信/ Idle 模式11.1.1.1测试目的当 UE已经完成IMSI附着,处于空闲模式。当UE收到来自核心网的寻呼请求,CN域指示为”PS”,则UE发送一条 paging SERVICE REQUEST 消息,当UE 接收一条下行NAS消息,其内容为包含RP-DATA RPDU (SMS DELIVER TP

2、DU) 的CP-DATA 时,验证UE 回送一条上行NAS消息,其内容为 CP-ACK ,接着发送一条包含RP-ACK RPDU的CP-DATA。11.1.1.2一致性需求参考3GPP TS 23.272中8.2.4节和3GPP TS 24.301中5.6.3.1, 5.6.3.3 和 9.9.3.22节。 以下流程为空闲状态下UE接收SMS的流程:Figure 8.2.4-1: Mobile terminating SMS in idle mode1)完成CS Fallback attach 过程,参考第5.2 节描述。2)4)SC发起SMS业务, HLR找到对应的MSC/VLR,以便将SM

3、S转发到相应的MSC/VLR。5) MSC/VLR向MME寻呼 (其中携带IMSI, VLR TMSI, Location Information, SMS indicator) 。6) MME 向UE注册的跟踪区tracking area(s)中的各eNodeB 发送寻呼消息。(参考TS23.4012)。7)eNodeB以STMSI寻呼MS/UE。8)UE 发送一条 Service Request 消息给 MME,UE 通过该RRC信令指示其STMSI 。8a) MME发送Service Request 消息给 MSC.8b) MSC/VLR 建立 SMS 消息,参见TS23.04014 (

4、该消息包括CPDATA/RPDATA/TPDU/SMSDELIVER各部分). MSC/VLR 将SMS 消息转发给MME。 9)MME通过NAS消息将SMS消息 发送给MS/UE.10) MS/UE通过NAS消息回送报告给MME,参考TS23.04014。11) MME 将回送的报告转发给MSC/VLR。 12)13) 这些步骤参考TS23.04014. 回送的报告转发给SC。NAS 消息是为了在MME与UE之间装载SMS 消息。无论UE发起或网络发起SMS业务,该过程中,UE应附着在EPS业务,IMSI应附着于non-EPS 业务,UE处于EMM-CONNECTED 模式。网络通过发送 D

5、OWNLINK NAS TRANSPORT 消息发起该过程,当UE收到消息时候,其EMM实体应将NAS消息内容转发给其SMS实体。装载SMS 消息的IE参考figure9.9.3.22.1 and table9.9.3.22.1.采用 type 4,最小长度为4 octets ,最大长度为 253 octets。87654321NAS message container IEIoctet 1Length of NAS message container contentsoctet 2octet 3NAS message container contentsoctet nFigure 9.9.3

6、.22.1: NAS message container information elementTable 9.9.3.22.1: NAS message container information elementNAS message container contents (octet 3 to octet n)This IE can contain an SMS message (i.e. CP-DATA, CP-ACK or CP-ERROR) as defined in subclause7.2 in 3GPPTS24.01113A. 11.1.1.3测试描述11.1.1.3.1预置条

7、件系统模拟器: 小区A 参考 Table 6.3.2.2-1 in 18.进行配置。 小区A 属于跟踪区TAI-1。 小区 A 为服务小区 “Serving cell”。被测终端: 清空UE的短信收件箱。前提: UE 处于小区A中的注册状态, 空闲模式 (state 2) ,参考 18。11.1.1.3.2测试流程Table 11.1.1.3.2-1: Main behaviourStProcedureMessage SequenceTPVerdictU - SMessage1The SS pages the UE using S-TMSI with CN domain indicator s

8、et to PS.-2The UE transmits a SERVICE REQUEST message.-SERVICE REQUEST-3The SS transmits a CP-DATA containing an RP-DATA RPDU (SMS DELIVER TPDU) encapsulated in a Downlink NAS transport message to the UE. UPLINK NAS TRANSPORT1P5Check: Does the UE transmit a CP-DATA containing an RP-ACK RPDU encapsul

9、ated in an Uplink NAS transport message?-UPLINK NAS TRANSPORT1P6The SS transmits a CP-ACK encapsulated in a Downlink NAS transport message to the UE. -DOWNLINK NAS TRANSPORT-11.1.1.3.3特殊消息内容Table 11.1.1.3.3-1: Message DOWNLINK NAS TRANSPORT (step 3, Table 11.1.1.3.2-1)Derivation Path: 36.508 clause

10、4.7.2-12AInformation ElementValue/remarkCommentConditionNAS message containerSet according to Table 11.1.1.3.3-2Table 11.1.1.3.3-2: Message CP-DATA (step 3, Table 11.1.1.3.2-1)Information ElementValue/remarkCommentConditionProtocol discriminator1001BSMS messagesMesssage type00000001BCP-DATACP-User d

11、ataSet according to Table 11.1.1.3.3-3Table 11.1.1.3.3-3: Message SMS DELIVER TPDU (step 3, Table 11.1.1.3.2-1)Information ElementValue/remarkCommentConditionTP-PIDDifferent from Type 0: “01000000”BTP-UDL 160TP-UD (140 octets)text of message (160 characters)The 160 characters in TP-UD shall include

12、at least one occurrence of each character in the default alphabet (see 3GPP TS 23.038, clause 6.2.1).Table 11.1.1.3.3-4: Message UPLINK NAS TRANSPORT (step 4, Table 11.1.1.3.2-1)Derivation Path: 36.508 clause 4.7.2-27AInformation ElementValue/remarkCommentConditionNAS message containerSet according

13、to Table 11.1.1.3.3-5Table 11.1.1.3.3-5: Message CP-ACK (step 4, Table 11.1.1.3.2-1)Information ElementValue/remarkCommentConditionProtocol discriminator1001BSMS messagesMesssage type00000100BCP-ACKTable 11.1.1.3.3-6: Message UPLINK NAS TRANSPORT (step 5, Table 11.1.1.3.2-1)Derivation Path: 36.508 c

14、lause 4.7.2-27AInformation ElementValue/remarkCommentConditionNAS message containerSet according to Table 11.1.1.3.3-7Table 11.1.1.3.3-7: Message CP-DATA (step 5, Table 11.1.1.3.2-1)Information ElementValue/remarkCommentConditionProtocol discriminator1001BSMS messagesMesssage type00000001BCP-DATACP-User dataSet according to Table 11.1.1.3.3-8Table 11.1.1.3.3-8: Message RP-ACK RPDU (step 5, Table 11.1.1.3.2-1)Information ElementValue/r

展开阅读全文
相关资源
相关搜索

当前位置:首页 > 行业资料 > 其它行业文档

电脑版 |金锄头文库版权所有
经营许可证:蜀ICP备13022795号 | 川公网安备 51140202000112号