《使用说明书h3cmsr36路由器快速安装指南_5pw101cmsr36路由器快速安装指南》由会员分享,可在线阅读,更多相关《使用说明书h3cmsr36路由器快速安装指南_5pw101cmsr36路由器快速安装指南(4页珍藏版)》请在金锄头文库上搜索。
1、 3 Mounting the Router to a Rack 安装路由器到机柜 Install front mounting brackets and the load bearing screws for rear mounting brackets 在路由器两侧安装前挂耳和后挂耳承重螺钉 Install cage nuts and rear mounting brackets 安装浮动螺母及后挂耳 The figure shows how to install rear mounting brackets on an MSR 36 10 36 40 安装MSR 36各款型路 由器时需要
2、在机柜上安 装后挂耳 以安装MSR 36 10和36 40为例 Determine the positions of cage nuts for mounting front mounting brackets and mark the positions 确定前挂耳浮动螺母安 装孔位 用记号笔标记 Supplied mounting brackets and the installation modes depend on your device model 对于不同款型的设备 标配挂耳及挂耳的安装方式不同 安装挂耳到路由器 时请按照实际情况进行选择 MSR 36 10 36 20 MSR
3、36 40 1U 2U 4 Mount the router to the rack 安装路由器到机柜 MSR 36 60 Router depth smaller than rack depth 设备深度小于机 柜深度时 Router depth greater than rack depth Exchange left and right rear mounting brackets 设备深度 大于机柜深度时 左右后挂 耳对调 Copyright 2013 Hangzhou H3C Technologies Co Ltd For more information about the product and installation procedures log in to Copyright 2013 杭州华三通信技术有限公司 版权所有 保留一切权利 如需了解产品及安装方面的更多信息 请登录 H3C 网站