《avago光电隔离产品选型指南》由会员分享，可在线阅读，更多相关《avago光电隔离产品选型指南（64页珍藏版）》请在金锄头文库上搜索。
1、Selection Guide Your Imagination. Our Innovation. Optoisolation and Optical Sensor Products Optoisolation Products 5 Quick Guide to Direct Upgrades 10 Product Selection Trees 13 Multi-Channel offering a variety of input and output characteristics that enable their use in high speed, high performance
2、 applications. Avago Technologies hermetic optocouplers excel in designs for harsh environments that require an exceptionally strong, rugged enclosure. For design ease, we offer most functions in 8- and 16-Pin DIPs, 20 terminal LCCCs and 16-Pin Flat Packs with various lead configurations for thru-ho
3、le or surface mount, with either single, dual or quad channels. These products are capable of operation and storage over the full military temperature range of -55C to +125C and can be purchased as either commercial product or with full MIL-PRF-38534 Class Level E, H or K. In line with regulations a
4、nd our customers needs, we do not offer unleaded solder on our solder dipped devices. All devices are manufactured and tested on a MIL-PRF-38534 certified line and are included in the DLA (Defense Logistics Agency) Qualified Products Database Supplemental Information Sheets QPDSIS-38534 as Hybrid Mi
5、crocircuits. Avago Technologies has supplied high reli- ability hermetic optocoupler products since 1975 for use in state-of-the-art applications. To meet the requirements of high reliability, products must be designed with rugged capabilities. They must be able to withstand severe levels of environ
6、mental stress and exposure without failure over extended periods of time. We have accomplished this objective in designing optocouplers that have proven their merits in numerous advanced space and defense programs in the international marketplace. Avago Technologies continuity and support of the ind
7、ustry has remained stable, with zero product obsolescence. We are committed to continued process and performance upgrades, backed up with diligent notification to our customers of any changes made using the GIDEP system. Statistical Process Control and extensive re- liability monitoring (life testin
8、g of hundreds of thousands of hours) are standard pro- cesses for hermetic optocouplers. Control charts are utilized at each critical step of the process and reviewed by product engineering to assure expected quality and reliability. Avago Technologies is a champion of DLAs QPDSIS and SMD (Standard
9、Microcircuit Drawing) programs. We support standard- ization, which results in cost-effectiveness and a streamlined acquisition process. As such Avago Technologies offers all Class E, H and K products under SMD numbers. Each Hi-Rel device is dual marked with the DLA SMD and Avago Technologies part n
10、umbers. Our Screening and Quality Conformance Inspection is outlined on the following page. Custom programs may include full Group A, B, C, and D inspection if required. Applications Military, aerospace and harsh industrial applications such as: Switching power supplies/UPS Motor control Field bus I
11、nverters Power distribution Communications Benefits Long term commitment - zero obsolescence Recognized for high quality, reliability, and customer support Certified and qualified to Classes E, H and K of MIL-PRF-38534 -55C to +125C operating temperature range All products available on DLA SMDs Gene
12、ral purpose and application specific products available 49 Optoisolation and Optical Sensor Products Screening per MIL-PRF-38534 ProcedureMethodConditionsClass HClass K Nondestruct bond pull2023N/A100% Internal visual2017100%100% Temperature cycle1010Condition C, -65C to +125C, 10 cycles100%100% Con
13、stant acceleration20015Kgs, Y1 and Y2100%100% Visual inspectionInternal requirements100%100% PIND*2020Condition AN/AN/A* SerializationN/A100% Pre-Burn-In Elec. TestGroup A, subgroup 1 (except II-O) (DC +25C)100%100% Burn-In 1015 Condition B, +125C, 160 hours Condition B, +125C, 320 hours 100% 100% I
14、nterim Elec. TestGroup A, subgroup 1 (except II-O) (DC +25C)N/A100% Post Burn-In Elec. TestGroup A, subgroup 1, (DC +25C), 10% PDA Group A, subgroup 1, (DC +25C), 2% PDA 100% 100% Final Elec. TestGroup A, subgroup 2 (DC +125C) Group A, subgroup 3 (DC -55C) Group A, subgroup 9 (AC +25C) Group A, subg
15、roup 10 (AC +125C) Group A, subgroup 11 (AC -55C) 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% Fine Leak1014Condition A100%100% Gross Leak1014Condition C100%100% Radiographics2012N/A100% External visual2009100%100% * PIND and RGA (Internal Water Vapor Content) testing (Group C) is no longer req
16、uired on Avago Technologies optocouplers due to the construction of the devices. DLA approved this test elimination in 2002. Group A Testing Group A testing is satisfied per the in-line verification testing requirements of MIL-PRF-38534 for Class H devices utilizing Option 1. Group A testing is per- formed per in-line sample testing requirements of MIL-PRF-38534 for Class E and K devices utilizing Option 2. Group B Testing Gr
