《【BS英国标准】BS EN 6153422 Powertrack systems — Part 22 Particular requirements for powertra》由会员分享,可在线阅读,更多相关《【BS英国标准】BS EN 6153422 Powertrack systems — Part 22 Particular requirements for powertra(26页珍藏版)》请在金锄头文库上搜索。
1、BS EN 61534-22:2009BSI British StandardsPowertrack systems Part 22: Particular requirements for powertrack systems intended for on floor or under floor installationNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWraising standards worldwideBS EN 61534-22:2009BRITISH STANDARDNati
2、onal forewordThis British Standard is the UK implementation of EN 61534-22:2009. It is identical to IEC 61534-22:2009.The UK participation in its preparation was entrusted to Technical CommitteePEL/213, Cable management.A list of organizations represented on this committee can be obtained on request
3、 to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.BSI 2009ISBN 978 0 580 57041 4ICS 29.060.10; 29.120.20Compliance with a British Standard cannot confer immunity from legal obligations.This Bri
4、tish Standard was published under the authority of the StandardsPolicy and Strategy Committee on 30 June 2009Amendments issued since publicationAmd. No. Date Text affectedBS EN 61534-22:2009EUROPEAN STANDARDEN 61534-22NORME EUROPENNEEUROPISCHE NORM April 2009 ICS 29.060.10; 29.120.20English versionP
5、owertrack systems -Part 22: Particular requirements for powertrack systems intended for on floor or under floor installation(IEC 61534-22:2009)Systmes de conducteurs prfabriqus - Partie 22: Exigences particulirespour les systmes de conducteurs prfabriqus destins au montage sur le sol ou sous le sol(
6、CEI 61534-22:2009)Stromschienensysteme -Teil 22: Besondere Anforderungen fr Stromschienensystemefr Fubodeninstallationen(IEC 61534-22:2009)This European Standard was approved by CENELEC on 2009-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the c
7、onditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.This European Standard exists in
8、three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechn
9、ical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland an
10、d the United Kingdom.CENELECEuropean Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische NormungCentral Secretariat: avenue Marnix 17, B - 1000 Brussels 2009 CENELEC -All rights of exploitation in any form and by any
11、 means reserved worldwide for CENELEC members.Ref. No. EN 61534-22:2009 EEN 61534-22:2009- 3 -ForewordThe text of document 23A/580/FDIS, future edition 1 of IEC 61534-22, prepared by SC 23A, Cable management systems, of IEC TC 23, Electrical accessories, was submitted to the IEC-CENELEC parallel vot
12、e and was approved by CENELEC as EN 61534-22 on 2009-04-01.This standard is to be used in conjunction with EN 61534-1:2003, Powertrack systems Part 1: General requirements.The clauses of the particular requirements of this Part 22 add to or modify the corresponding clauses in Part 1. Where the text
13、of Part 22 indicates an “addition” or a “deletion” or a “replacement” of the relevant requirement, test specification or explanation of Part 1, these changes are made to the relevant text of Part 1, which then becomes part of the standard. Where no change is necessary, the words: “This clause of Par
14、t 1 is applicable” are used in Part 22.Subclauses, tables and figures which are in addition to those in Part 1 are numbered starting with 101. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identicalnational standard or by end
15、orsement(dop)2010-01-01 latest date by which the national standards conflictingwith the EN have to be withdrawn(dow)2012-04-01Endorsement noticeThe text of the International Standard IEC 61534-22:2009 was approved by CENELEC as a EuropeanStandard without any modification.BS EN 61534-22:200961534-22 IEC:2009 7 CONTENTS1Scope .