《Ctick强制认证标准清单》由会员分享,可在线阅读,更多相关《Ctick强制认证标准清单(43页珍藏版)》请在金锄头文库上搜索。
1、C-tick强制认证标准清单The Australian Communications and Media Authority (ACMA) incorporates the listed standard(s) as a mandatory standard under section 162 of the Radiocommunications Act 1992 as part of the ACMA Electromagnetic Compatibility (EMC) Regulatory Arrangement. Part 1 Generic standards 1 2 3 4 5
2、6 7 8 9 10 Serial Applicable Standard Full Title of Standard Source of Std Publication Date Vari-ation Y/N Brief description of equipment to which standard should apply Standard being replaced Expiry Date of replaced standard Remarks G1 AS/NZS 4251.1: 1999 Electromagnetic compatibility (EMC) Generic
3、 emission standard Part 1: Residential, commercial and light industry AS/NZS 05/03/1999 N All equipment intended for use in a residential, commercial, or light industrial environment that is not covered by one of the product family standards AS/NZS 4251.1: 1994 21/12/2007 G2 AS/NZS 61000.6.3: 2007 E
4、lectromagnetic compatibility (EMC) Part 6.3: Generic standards Emission standard for residential, commercial and light-industrial environments AS/NZS 31/05/2007 N All equipment intended for use in a residential, commercial, or light industrial environment that is not covered by one of the product fa
5、mily standards AS/NZS 4251.1: 1999 31/05/2009 G3 EN 61000-6-3: 2001 with amendment A11 (2004) Electromagnetic compatibility (EMC) Part 6-3: Generic standards Emission standard for residential, commercial and light-industrial environments EN 2001 N All equipment intended for use in a residential, com
6、mercial, or light industrial environment that is not covered by one of the product family standards EN 50081.1: 1992 21/12/2007 G4 IEC 61000-6-3:1996 Electromagnetic compatibility (EMC) Part 6-3: Generic standards Emission standard for residential, commercial and light-industrial environments IEC 19
7、96 N All equipment intended for use in a residential, commercial, or light industrial environment that is not covered by one of the product family standards G5 IEC 61000-6-3:2006 Electromagnetic compatibility (EMC) Part 6-3: Generic standards Emission standard for residential, commercial and light-i
8、ndustrial environments IEC 17/07/2006 N All equipment intended for use in a residential, commercial, or light industrial environment that is not covered by one of the product family standards IEC 61000-6-3:1996 17/07/2008 G6 AS/NZS 4251.2: 1999 Electromagnetic compatibility (EMC) Generic emission st
9、andard Part 2: Industrial environments AS/NZS 05/03/1999 N All equipment intended for use in an industrial environment that is not covered by one of the product family standards G7 AS/NZS 61000.6.4: 2007 Electromagnetic compatibility (EMC) Part 6.4: Generic standards Emission standard for industrial
10、 environments AS/NZS 31/05/2007 N All equipment intended for use in an industrial environment that is not covered by one of the product family standards AS/NZS 4251.2: 1999 31/05/2009 G8 EN 61000-6-4:2001 Electromagnetic compatibility (EMC) Part 6-4: Generic standards Emission standard for industria
11、l environments EN 2001 N All equipment intended for use in an industrial environment that is not covered by one of the product family standards EN 50081-2:1993 21/12/2007 G9 IEC 61000-6-4:1997 Electromagnetic compatibility (EMC) Part 6-4: Generic standards Emission standard for industrial environmen
12、ts IEC 1997 N All equipment intended for use in an industrial environment that is not covered by one of the product family standards G10 IEC 61000-6-4:2006 Electromagnetic compatibility (EMC) Part 6-4: Generic standards Emission standard for industrial environments IEC 10/07/2006 N All equipment int
13、ended for use in an industrial environment that is not covered by one of the product family standards IEC 61000-6-4:1997 10/07/2008 Part 2 Product family and equipment standards 1 2 3 4 5 6 7 8 9 10 Serial Applicable Standard Full Title of Standard Source of Std Publication Date Vari-ation Y/N Brief
14、descriptionof equipmentto which standardshould apply Standard beingreplaced Expiry Date of replaced standard Remarks 1 AS/NZS CISPR 11:2004(2nd Edition) Industrialscientific andmedical (ISM) radio-frequencyequipment Electromagnetic disturbance characteristics Limits and methods of measurement AS/NZS
15、 25/11/2004 N Industrialscientific and medical (ISM) radio-frequency equipment AS/NZS 2064 21/12/2007 Note: The ISM band for Australian is 918-926 MHz, not 902-928MHz as shown in the standard. Devices operating outside 918-926MHz are not acceptable in Australia . 2 CISPR 11:2003 with amdts 1 (2004) and 2 (2006) Industrialscientific andmedical (ISM) radio-frequencyequipment Electromagnetic disturbance charact