《不同齿形同步带轮画法标准》由会员分享，可在线阅读，更多相关《不同齿形同步带轮画法标准（2页珍藏版）》请在金锄头文库上搜索。
不同齿形同步带轮画法标准节距M關半径齿矗逼1 Tti3M1L2S0别1.900.35M52.160.563.250.433Mg3.542J75.350,S55514M146.204,659.S0L4冷STPD/ST湮带轮齿形尺寸节范pb止吉bura帼#径酬竟止 UhlS：M0.761.325130040S3MrJ1.111J751.95Q.150S5M51.7732753250.250SSMS2.S35305200.4S14M144.959.2S9.1005梯形直边告同步轮齿形尺寸节距pbbwhgrbrtMXL2.0320.8Z050.69200.350.13XL5.0801.320.051.65250.410.64L9.5253.050.102.67201.191.17H12.704.19=0.133.05201.601.6XH22.2257.90x0.157.14201.982.39XXH31.75012.17x0.1810.31203.963.18T型齿同步轮齿形尺寸
