《柴油发电机组双路电源自动转换柜》由会员分享，可在线阅读，更多相关《柴油发电机组双路电源自动转换柜（4页珍藏版）》请在金锄头文库上搜索。
1、、ATS 转换柜简介主要由控制元件及断路器组成，可以手动或自动控制的通断进行送电。结构简单操作方 便，操作人员容易掌握使用方法。其功能能满足各类用户的需求，开关柜可应用于发电机组 进行通断电用，也可以用于其它的配电设备。二、ATS双电源自动转换开关1原理双电源自动转换开关是双系统的电源(双电源)利用电磁线圈瞬时的转换，是向负荷供 应电力的转换开关。开关的电磁线圈只在做转换动作时使其通电，动作过后不再通电，由于 采用的是平时消耗电力为零的瞬时励磁式机械保持型的结构，开关平时动作过后通过机械性 来保持触点接通状态。2结构共有三部分组成： 机构部分：由机械保持结构和可动外壳、弹簧、可动板、 2 组电
2、磁线圈和铁心，微型控 制开关，控制电路等构成。 触点部分：由可动触点，固定触点，端子材料，可曲电线，支撑金属件，触点弹簧，灭 弧装置，绝缘材料等构成。 辅助部分：由辅助触点，绝缘外箱，手动操作棒(可分离)等组成。3性能 生产标准：IEC60947-6-1GB/T14048.11JEM 1465 额定电压：AC600V 动作电压：AC220V (其他电压也可制作) 额定电流： 30A-4000A 极数： 4P 3P 2P 1P 寿命：机械性 25 万次以上( 30A-400A)5 万次以上( 500A-4500A)电气性 5 万次以上( 30A-400A)1 万次以上( 500A-4500A)
3、辅助触点： AC250V 10A三、ATS 自动转换控制器ATS控制器是一种集测量显示、控制、三遥等功能为一体自动转换控制器，该控制器有 三种型号，分别用于市电与发电、市电与市电或发电与发电等双电源系统的自动转换控制。 微机控制，全数字化技术；通过面板按键设定控制器运行方式；通过LED直观显示ATS的运行状态，控制器运行模式；通过面板 LED 数码管显示和按键，设定运行参数；通过 LED 显示测量数据，包括电压、频率；通过RS485通讯口和PC连接(需RS485/RS232接口转换器)，可读写、修改所有设定值和 数据；序号 项目 预设值 数值范围1市电低电压故障值AC187V ACO220V2
4、市电高电压故障值 AC242V AC220-286V3 市电高频率故障值 52HZ 50-65HZ4 市电低频率故障值 48HZ 45-50HZ5 市电故障确认延时时间 10秒 0-9999秒6 市电供电延时时间 10秒 0-9999秒7 发电机组起动延时时间 15 秒 0-9999 秒8 发电低电压故障值 AC187V AC0220V9 发电高电压故障值 AC242V AC220286V10 发电高频率故障值 52HZ 50-65HZ11 发电低频率故障值 48HZ 40-50HZ12 发电故障确认延时时间 10秒 0-9999秒13 发电供电延时时间 10 秒 0-9999 秒14 引擎冷
5、却延时时间 300 秒 0-9999 秒15 转换开关的类型 1 型 1 型 2 型 3 型16 通讯地址 0(不设) 0(不设) 1-128 监控功能：包含所有测量数据、控制功能、运行控制参数设定Dual power supply of the diesel generator set automatically converted cabinetATS cut (rpm) for the cabinet to elaborate:An ATS converter cabinet IntroductionOff control components and circuit breakers
6、can be manual or automatic control of power transmission. Simple structure, convenient operation, the operator is easy to grasp. Its functionality to meet the various needs of users, the switchgear can be applied to generating units through power outages with other distribution equipment can also be
7、 used.Two, ATS dual power automatic transfer switchA. PrincipleDual power automatic transfer switch is the power of the dual system (dual power) using electromagnetic coil instantaneous conversion, the change-over switch to the load supply of electricity. The electromagnetic coil of the switch so th
8、at power only to do the conversion action is no longer energized after action is usually the instantaneous power consumption is zero excitation machinery to maintain the type of structure, switch usually to maintain the mechanical action after contact connected to the state.Two. StructureTotal of th
9、ree parts: of part: maintained by the mechanical structure and the movable housing, spring, plate, set of electromagnetic coils and core, micro-control switch, control circuit and other composition. contact parts: from the moving contact, the composition of the fixed contact terminal material, can Q
10、u wire, metal parts support, contact spring, the interrupter device,(separable).3. Performance production standards:IEC60947-6-1GB/T14048.11The JEM 1465 Rated voltage: up to AC 600V Action voltage: AC220V (other voltages can be made)(4) Rated current: 30A-4000A Number of poles: 4P 3P 2P 1P life:Mech
11、anical more than 250 000 (30A-400A)50000 (500A-4500A)Electrical resistance of more than 50000 (30A-400A)10000 (500A-4500A) auxiliary contact: AC250V 10AThird, the ATS automatically converted to the controllerATS controller is a set of measurement control three remote function is automatically conver
12、ted into one controller, the controller has three models, respectively, for dual-supply of electricity and power generation, electricity and mains or power generation and power generation The system automatically converts control. Microprocessor control, all-digital technology;Panel buttons to set t
13、he controller to run; through LED intuitive display the operational status of the ATS, the controller mode of operation;Panel LED digital display and buttons to set the operating parameters; LED display measurement data, including voltage, frequency; RS485 communication port and a PC connection (req
14、uired RS485/RS232 interface converter), can read and write, and modify all settings and data; all connections of the controller are connected by pin locked terminal for easy connection to the controller, move, repair, replacement;, ATS transfer switch operation control parametersNo Item the default
15、range of valuesAn electronic low voltage fault value AC0 is AC187V 220V2 mains voltage failure value AC242V AC220 286VFault value of the three mains high frequency 52HZ 50-65HZFault value of the four mains low frequency 48HZ 45-50HZ5 mains failure to confirm 0-9999 seconds, 10 seconds of delay time 0-9999 seconds, 10 seconds of the delay time of 6 electricity supply 7 generator sets starting 0-9999 seconds, 15 seconds of delay time 8 generation low voltage fault value AC187V AC0 is 220V9 electricity generation high-voltage fault value AC242V AC220 286V
