《A型斜拉桥桥塔液压自爬模施工技术论文》由会员分享，可在线阅读，更多相关《A型斜拉桥桥塔液压自爬模施工技术论文（1页珍藏版）》请在金锄头文库上搜索。
1、A型斜拉桥桥塔液压自爬模施工技术摘 要：宁波市福明路（长寿路一兴宁路）二期工程iii标段斜拉 桥a型桥塔采用液压自爬模施工工艺，液压自爬模通过自带的液压 顶升系统，在无需其他起重设备的状态下完成模板架体与导轨间的 互爬，稳步向上交替爬升，完成桥塔各节段的混凝土浇筑。本文主 要介绍了液压自爬模体系施工的工艺流程等。关键词：桥塔液压自爬模施工abstract:、the ningbo yu heng rocks road （changshouroad-three road） of the sec ond phase of the projectcon tracti cable-stayed brid
2、ge type a bridge tower adopts hydraulic creep model con structi on tech no logy, the hydraulic creep mode through own hydraulic roof up system, no other lifti ng equipme nt in the state of complete templates frame body and guide of mutual climb, steady upward climb alter nately, complete each segment of the towers of concrete casting. this article mai nly in troduced the hydraulic creep model system con structi on process, etc.keywords: bridge tower hydraulic creep model construction1工程概况1.1地理位置宁波市福明路（长寿路一兴宁路）二期工程i标段设计起点为k1+312.13,终点为k1+732.13，桥中心相对杭深线里程为
