《欧洲合金标准组织网站目录》由会员分享，可在线阅读，更多相关《欧洲合金标准组织网站目录（48页珍藏版）》请在金锄头文库上搜索。
1、 欧洲合金原则目录 国家 国标化组织网站 欧洲合金原则目录 编号中文名称英文名称CR 10316- 低合金钢的光辐射分析（常规法） 发射光谱法的原则常规法制定指南 Optical emission analysis of low alloy steels (routine method) - Guidelines for the preparation of standard routine method for optical emission spectrometry CR 12471- 镍从直接和长期接触皮肤的物品的合金和镀层中释放的屏蔽实验 Screening tests for ni
2、ckel release from alloys and coatings in items that come into direct and prolonged contact with the skin CR 12776-1997 铜和铜合金 材料号分派和材料登记的规定和程序 Copper and copper alloys - Provisions and procedures for the allocation of material numbers and registration of materials CR 13388-1998 铜和铜合金 组分和产品一览表 Copper
3、and copper alloys - Compendium of compositions and products EN 10016-1-1994 拉制和/或冷轧用非合金钢棒第1部分：一般规定 Non-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements EN 10016-2-1994 拉制和/或冷轧用非合金钢棒第2部分：一般用钢棒的特殊规定 Non-alloy steel rod for drawing and/or cold rolling - Part 2: Specific re
4、quirements for general purposes rod EN 10016-3-1994 拉制和/或冷轧用非合金钢棒第3部分：沸腾和沸腾代用低碳钢棒的特殊规定 Non-alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod EN 10016-4-1994 拉制和/或冷轧用非合金钢棒第4部分：专用棒材的特殊规定 Non-alloy steel rod for drawing
5、 and/or cold rolling - Part 4: Specific requirements for rod for special applications EN 10025-1993 热轧非合金构造钢制品交货技术条件 Hot rolled products of non-alloy structural steels; technical delivery conditions (includes amendment A1:1993) EN 10028-2- 压力用途的钢板制品第2部分：具有规定的耐高温性能的非合金钢和合金钢 Flat products made of stee
6、ls for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties EN 10028-4- 压力用途的钢板制品第4部分：具有低温特性的镍合金钢 Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties EN 10051-1997+A1-1997 非合金钢和合金钢
7、持续热轧钢板材、薄板和带材规范尺寸和形状公差 Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels - Tolerances on dimensions and shape (includes amendment A1:1997) EN 10083-2-1996+A1-1996 淬火钢和回火钢第2部分：非合金级钢交货技术条件 Quenched and tempered steels - Part 2: Technical delivery conditions for unal
8、loyed quality steels (includes Amendment A1:1996) EN 10090-1998 内燃机阀门用钢和合金 Valve steels and alloys for internal combustion engines EN 10095-1999 耐热钢和镍合金 Heat resisting steels and nickel alloys EN 1011-4- 焊接 金属材料焊接的推荐规范 第4部分：铝和铝合金的电弧焊接 Welding - Recommendations for welding of metallic materials - Par
9、t 4: Arc welding of aluminium and aluminium alloys EN 10126-1995 半成品交货的冷轧非合金钢电工钢薄板和钢带 Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state EN 10165-1995 半成品交货的冷轧电工合金钢制薄板和带材 Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed
10、state EN 10210-1-1994 非合金及细晶粒构造钢的热轧构造空心型材交货技术条件 Hot finished structural hollow sections of non-alloy and fine grain structural steels; part 1: technical delivery requirements EN 10210-2-1997 非合金及细晶粒构造钢的热轧构造空心型材第2部分：公差、尺寸和截面特性 Hot finished structural hollow sections of non-alloy and fine grain struct
11、ural steels - Part 2: Tolerances, dimensions and sectional properties EN 10216-1- 压力用途的无缝钢管交货技术条件第1部分：有规定室温特性的非合金钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties / Note: To be amended by EN 10216-
12、1/prA1 (-07). EN 10216-2- 压力用途的无缝钢管交货技术条件第2部分：有规定高温特性的非合金及合金钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties / Note: To be amended by EN 10216-2/prA1 (-07). EN 10216-3- 压力用途的无缝钢管交货技术
13、条件第3部分：合金细晶粒钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes / Note: To be amended by EN 10216-3/prA1 (-07). EN 10216-4- 压力用途的无缝钢管交货技术条件第4部分：有规定低温特性的非合金及合金钢管 Seamless steel tubes for pressure purposes - Technical delivery conditions
14、 - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties / Note: To be amended by EN 10216-4/prA1 (-07). EN 10217-1- 压力用途的焊接钢管交货技术条件第1部分：有规定室温特性的非合金钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified r
15、oom temperature properties EN 10217-2- 压力用途的焊接钢管交货技术条件第2部分：有规定高温特性的电焊非合金及合金钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties EN 10217-3- 压力用途的焊接钢管交货技术条件第3部分：合金细晶粒钢管 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes EN 10217-4- 压力用途的焊接钢管交货技术条件第4部分：有规定低温特性的电焊非合
