Stampin s techniques Two-Step Stampin&Repetition Technique A:Two-Step Stampin?1 Stamp the base image.2 Position and stamp the overlay or adjoining image.QUICK TIP:Use lighter ink for the base image and darker ink for the overlying image.Technique B:Repetition 1 Ink a stamp.2 Stamp the image.3 Restamp the image one or more times without re-inking it.This technique is a great way to get several shades of colour from a single ink pad.QUICK TIP:Use repetition to simulate movement on your card.Watercolouring A Dip the tip of a blender pen on to the corner of a Stampin Pastel,then apply to the stamped image.OR B Press the closed lid of a Classic Stampin Pad down against the ink pad,creating a small pool of colour in the lid;then open the lid.Use a damp watercolour brush or Aqua Painter to lift the ink from the lid and apply.OR C Outline a section of the stamped image with a watercolour pencil,then use a wet watercolour brush,Aqua Painter,or blender 名师资料总结-精品资料欢迎下载-名师精心整理-第 1 页，共 6 页 -pen to pull colour where desired.QUICK TIP:For more saturated colours,watercolour with Classic ink refills.Heat Embossing&Emboss Resist Technique A:Heat Embossing 1 Place your card stock in a Powder PalTM tray or over a large piece of scratch paper.2 Rub the Embossing Buddy?across the card stock you want to emboss(this keeps the embossing powder from sticking anywhere but on the ink).3 Stamp the image with Craft,VersaMark?,or embossing ink.4 Pour powder onto the inked image,making sure that the image is coated completely.5 Shake off excess powder into the tray and funnel it back into the container.6 Heat the stamped image only until the powder changes to a shiny liquid and rises.7 Allow embossed image to cool.Technique B:Emboss Resist 1 Follow steps 1 7 above,using Crystal Clear Stampin Emboss?powder.2 Apply ink with a sponge directly to the paper over and around the embossed image.3 Wipe the embossed image with a tissue to remove the excess ink.QUICK TIP:Avoid overheating the powder and burning the paper 名师资料总结-精品资料欢迎下载-名师精心整理-第 2 页，共 6 页 -when working with a heat tool.Stampin Pastels Technique A:Chalking 1 Apply pastel colour to your card stock or paper with a sponge-tip applicator,cotton swab,sponge dauber,or stiff paintbrush.2 Blend the colours as desired with the applicators or blender pen.When using blender pens,just touch the pen directly to the corner of the chalk to pick up the colour.Technique B:Poppin Pastels 1 Stamp the image with a Whisper White Craft Stampin Pad or VersaMark ink pad.2 Use sponge daubers to apply the pastel colour directly to the ink.3 Blow off any excess powder.(Repeat this process if you are using this technique with a Two-Step Stampin set.)QUICK TIP:To avoid smearing,gently dab the chalk rather than rubbing it across the image.名师资料总结-精品资料欢迎下载-名师精心整理-第 3 页，共 6 页 -Rock&Roll Directions:1 Tap stamp on light-coloured ink pad.2 Press edges of stamp in a rolling motion on darker ink pad,being careful not to ink the center of the stamp.QUICK TIP:Always use the lightest coloured ink first to avoid getting dark ink on your light ink pad.Markers Technique A:Multiple Colours 1 Use a marker to apply ink only to the desired parts of the image.2 Add other colours if desired.3 Breathe on the inked image to remoisten the ink before stamping onto paper.Technique B:Omitting 1 To omit a certain part of a stamp image,use a marker to apply ink only to the desired parts of the image.2 Breathe on the inked image to remoisten the ink before stamping onto paper.QUICK TIP:Use a Stamp-a-ma-jig stamp positioner if you want to perfectly align the overlay image.名师资料总结-精品资料欢迎下载-名师精心整理-第 4 页，共 6 页 -Background Stamps 1 With the background stamp face up,ink the stamp completely by tapping the ink pad on the rubber.2 Place the background stamp face up on your stamping surface.3 Place the card stock on the inked stamp.4 If the card stock is smaller than the stamp,cover the card stock with a piece of scratch paper.5 Rub the card stock with smooth,firm strokes,making sure to rub all areas of the stamp and to keep the card stock from sliding.6 Remove the scratch paper and carefully lift the card stock off the stamp.QUICK TIP:Create a multicoloured background by applying two or more inks to the background stamp.Masking 1 Stamp image on card stock.2 Stamp image again on a piece of scratch paper.3 Cut carefully around the scratch paper image,cutting just inside the lines;this will be your mask.4 Place the mask on top of the card stock image.5 Stamp another image over a portion of the mask to create layered,interacting images.6 Remove the mask to see the finished look.7 To stamp a partial image,use tape to cover the part of the stamp you don t want to appear,ink the stamp,remove the tape,and stamp the image.QUICK TIP:To ensure that the 名师资料总结-精品资料欢迎下载-名师精心整理-第 5 页，共 6 页 -mask stays in place,stamp image on a Post-It?note.Heat&Stick Powder 1 Stamp image with VersaMark or Craft Stampin Pad.2 Apply Heat&Stick powder to the inked image.Shake off exc。