《维修电工plc实践练习题目》由会员分享，可在线阅读，更多相关《维修电工plc实践练习题目（6页珍藏版）》请在金锄头文库上搜索。
1、leading cadres awareness of right in place, study the party Constitution and party rules, series of speeches can make proper effect. Party cadres to two lead by example, to lead by example we must change our mind, recognizing that two is important. First, learn the Communist Party Constitution Party
2、 rules, learning learning series important speech by General Secretary can enhance theory. With the third revolution the rise of rapid changes in our life are feeling, the Communists should adhere to the theory of confidence will continue to learn from the voices of the times, the times, in turn, wi
3、ll have new requirements for leading party cadres. Two is the most basic meaning of members all mastering the core theory and the most advanced weapons theory, complement the spirit of calcium. Secondly, the Communist Party Constitution Party rules, learning learning series important speech by Gener
4、al Secretary be able to firmly build the ideological foundation. Under the impact of multiple values, the two is to help cultivate independent judgment in numerous miscellaneous multiple concepts, so that the majority consensus of party members, the important magic weapon of the party with the reson
5、ance frequency. Finally, the Constitution of the Communist Party, party rules, learning learning series important speech can stand crowds, General Secretary position. Now, some grass-roots work in the the old way didnt work, hard way cannot, the new approach would not phenomenon, sometimes due to a
6、mass of party members and cadres not understanding, does not meet. In fact, the mass convincing and identityBehind are likely to be party members and leading cadres themselves ignoring beliefs held, resulting in lack of persuasion and sense of identity. Two is in fact guaranteed party cadres work, a
7、n important prerequisite for convincing the masses. Bacon said it well: practical men can handle individual matters, but looking at the whole operation globally, but only man can do to knowledge. Giving up two effective, must first raise awareness of leading cadres of party members, as party members
8、 learn real responsibility to know to music , good changes, in parallel with the ground, do not forget to also answer the antenna, draw catches on meteorology, which sit between heaven and Earth which melds together the dreams of practicing Communist. Members cadres should in two learn a do in the b
9、ased post do contribution in all members in the carried out learn Constitution Party rules, and learn series speech, do qualified members learning education, this is following party of mass line education practice activities and three strict three real topic education zhihou, deepening party educati
10、on of and once important practice, is promoted three strict three real topic education from key minority to all members expand, and from concentrated education to regular education extends of important initiatives. Vast numbers of party members and cadres in the course of two, should be可编程控制器（PLC）模拟
11、题试题1：用PLC进行控制线路的设计，并进行安装与调试。考核要求：（1）用PLC设计下图电路并且进行安装与调试（2）电路设计：根据任务，设计主电路电路图，列出PLC控制IO口（输入/输出）元件地址分配表，根据加工工艺，设计梯形图及PLC控制IO口（输入/输出）接线图，根据梯形图，列出指令表。（3）安装与接线：将熔断器、接触器、PLC装在一块配线板上，而将转换开关、按钮等装在另一块配线板上。按PLC控制IO口（输入输出）接线图在模拟配线板上正确安装，元件在配线板上布置要合理，安装要准确、紧固，配线导线要紧固、美观，导线要进行线槽，导线要有端子标号，引出端要用别径压端子。（4）PLC键盘操作：熟练
12、操作键盘，能正确地将所编程序输人PLC；按照被控设备的动作要求进行模拟调试，达到设计要求。（5）通电试验：正确使用电工工具及万用表，进行仔细检查，通电试验，并注意人身和设备安全。试题2：用PLC进行控制线路的设计，并进行安装与调试。考核要求：（1）用PLC设计下图电路，并且进行安装与调试（2）电路设计：根据任务，设计主电路电路图，列出PLC控制IO口（输入/输出）元件地址分配表，根据加工工艺，设计梯形图及PLC控制IO口（输入/输出）接线图，根据梯形图，列出指令表。试题3：用PLC进行控制线路的设计，并进行安装与调试。考核要求：（1）用PLC设计三台电动机的控制电路。下图给出了工作时序图设计并
13、且进行安装与调试2）电路设计：根据任务，设计主电路电路图需加入必要的保护，列出PLC控制IO口（输入/输出）元件地址分配表，根据加工工艺，设计梯形图及PLC控制IO口（输入/输出）接线图，根据梯形图，列出指令表。试题4、PLC控制小车运动装置的设计，并进行安装与调试控制要求1. 小车右限位（初始位置）开始工作。放料口放料7S小车装满。小车左行到左限位卸料。卸料5S卸料结束。小车返回右限位位置。2. 系统可以通过主令电器（按钮或转换开关）实现单次、10次和无限次工作。3. 系统需设必要的保护（短路、过载、紧急停止）和复位工作过程。考核要求：电路设计：根据任务，设计主电路电路图，列出PLC控制I/
14、O口（输入/输出）元件地址分配表，根据加工工艺，设计梯形图及PLC控制I/O口（输入/输出）接线图，根据梯形图，列出指令表。试题5、设计一个由 8个灯组成的彩灯组。按下启动按钮之后，相邻的两个彩灯两两同时点亮，以此类推，不断循环。每组点亮的时间为 2秒。L1 L2(亮) (2S) L2 L3(亮) (2S) L3 L4(亮) (2S) L4 L5(亮) (2S) 。1、 按下停止按钮1之后，所有彩灯立刻熄灭，再次启动系统从头开始工作。2、 按下停止按钮2之后，所有彩灯立刻熄灭，再次启动系统从停止处开始工作。3、 按下暂停按钮，系统暂停在按动按钮处，暂停按钮复位后，系统正常工作。考核要求：电路设
15、计：根据任务，设计主电路电路图，列出PLC控制I/O口（输入/输出）元件地址分配表，根据加工工艺，设计梯形图及PLC控制I/O口（输入/输出）接线图，根据梯形图，列出指令表。试题6、配料系统（下图）1#料斗2#料斗卸料仓控制要求：1.系统必须在原始位置开始启动（不在原始位置可以手动调整到原始位置）2.启动后，1#料斗和2#料斗同时放料。1#料斗放3S小车装满，2#料斗放5S小车装满。3.小车装满料后分别向卸料仓运行，分别达到卸料仓后卸料，2S同时卸完。分别返回。4.系统可以实现单次/循环切换工作。注：料斗用电磁阀控制、小车用电机控制、卸料用电磁阀控制、可以根据示意图设置位置开关和按钮。考核要求： I/O地址分配、主电路原理图、PLC原理图、PLC软件程序清单、上机调试。试题7、生产线送料系统料斗按钮按钮按钮控制要求：1、 系统必须在原始位置开始启动（不在原始位置可以手动调整到原始位置）2、 启动后料斗放料，3S小车装满。3、 小车装满料后，根据不同位置按钮按动，小车自动到达相应位置。等待5S后（人工取料）小车自动返回装料位置装料待命。注：料斗用电磁阀控制、小车用电机控制、可以根据示意图设置位置开关和按钮。考核要求：I/O地址分配、主电路原理图、PLC原理图、PLC软件程序清单、上机调试。试题8、自动卷帘门下限位按键下限位电机控制要
