《ANSYS命令流薄壁圆柱的非线性分析》由会员分享，可在线阅读，更多相关《ANSYS命令流薄壁圆柱的非线性分析（2页珍藏版）》请在金锄头文库上搜索。
1、finish/clear/prep7t=0.004r=0.5l=1xigm=1et,1,shell93mp,ex,1,2.0e11mp,prxy,1,0.3r,1,tcyl4,r,lvdele,allasel,s,loc,z,0asel,a,loc,z,ladele,allasel,allwprota,90asbw,allwpcsys !Defines the working plane location based on a coordinate systemesize,r/8mshape,0,2dmshkey,0amesh,alllsel,s,loc,z,lsfl,all,pres,xig
2、mallsel,alllsel,s,loc,z,0dl,all,uzlsel,a,loc,z,lcsys,1nsll,s,1 !selects those nodes associated with the selected linesnrotat,alld,all,ux,uyallsel,all/soluantype,0pstres,onsolvefinish/soluantype,1bucopt,lanb,1solvefinish/post1set,listfinish/soluantype,0lsel,s,loc,z,1sfl,all,pres,4.7e6allsel,allnlgeom,onnsubst,20arclen,onoutres,all,allsolve/post26/axlab,x,disp /axlab,y,force nsol,2,node1382,u,zprod,3,2,-1prod,4,1,4e6xvar,3plvar,4finish
