《AS 1657-1992---固定平台、走道、楼梯与梯子的设计、施工与安装》由会员分享，可在线阅读，更多相关《AS 1657-1992---固定平台、走道、楼梯与梯子的设计、施工与安装（71页珍藏版）》请在金锄头文库上搜索。
1、Australian Standard澳大利亚标准 Fixed platforms, walkways, stairways and ladders Design, construction and installation固定平台、走道、楼梯与梯子的设计、施工与安装This Australian Standard was prepared by Committee SF/13, Platforms, Gangways, Stairways and Ladders. It was approved on behalf of the Council of Standards Australia
2、on 9 September 1992 and published on 16 November 1992.本澳大利亚标准是由 SF/13 平台、通道、楼梯与梯子委员会编制的。 1992 年 9 月经澳大利亚标准委员会通过，1992 年 11 月 16 日出版。The following interests are represented on Committee SF/13:SF/13 委员会由以下单位参加：Aluminium Development Council铝业发展委员会Bureau of Steel Manufacturers of Australia 澳大利亚钢铁制造局Confe
3、deration of Australian Industry澳大利亚工业联合会Department of Employment, Vocational Education, Training and Industrial Relations, Qld昆士兰州就业、职业教育、培训与劳资关系部Department of Labour and Industry, Tas.塔斯马尼亚州劳工部Master Builders 建筑商协会Construction and Housing Association of Australia澳大利亚建筑与住房协会Pacific Power太平洋电力公司Publi
4、c Works Department, N.S.W.新南威尔士州公共工程部Royal Australian Institute of Architects皇家澳大利亚建筑师协会Water Board, Sydney-Illawarra-Blue Mountains 水理事会，悉尼-伊拉瓦拉-蓝山流域WorkCover Authority of New South Wales新南威尔州工伤保险局Review ofAustralian Standards. To keep abreast ofprogress in industry, Australian Standards are subjec
5、t to periodic review and are kept up to date by the issue of amendments or new editions as necessary. It is important therefore that Standards users ensure that they are in possession of the latest edition, and any amendments thereto.澳大利亚标准的评审。为了保持标准与工业发展同步，澳大利亚标准需要定期进行评审并发布修订本，必要时出版新的版本以保持更新。因此，标准使
6、用者使用的版本必须是最新版本，同时需要使用所有修正版本的内容。澳大利亚标准的评审：为了保持与工业进步接轨，澳大利亚标准接受定期评审，并通过发行修正内容或新版本（必要时）来保持最新。因此本标准的使用者可以确信其使用的是最新版本以及版本修正内容。Full details of all Australian Standards and related publications will be found in the Standards Australia Catalogue of Publications; this information is supplemented each month b
7、y the magazine The Australian Standard, which subscribing members receive, and which gives details of new publications, new editions and amendments, and of withdrawn Standards.澳大利亚标准局出版的标准目录收集了所有澳大利亚标准的详细信息和相应出版物，此信息每月在杂志澳大利亚标准上进行补充说明，已订阅会员会收到此杂志，另外该杂志还会介绍新出版物、新版本和修订本以及废止标准的详细信息。有关所有澳大利亚标准的详细信息和相关出版
8、物可以参见“澳大利亚标准出版目录”；每月出版的澳大利亚标准会对上述信息做出补充。订阅此月刊的读者可从这本杂志中了解到新出版物、新版本和修正内容以及已撤销标准的详情。Suggestions for improvements to Australian Standards, addressed to the head office of Standards Australia, are welcomed. Notification of any inaccuracy or ambiguity found in an Australian Standard should be made withou
9、t delay in order that the matter may be investigated and appropriate action taken.我们欢迎提出有关改进澳大利亚标准方面的建议，欢迎写信到澳大利亚标准局。如发现澳大利亚标准存在任何不准确或含糊不清的内容，请及时告诉我们以便我们做出调查并采取适当措施。欢迎对澳大利亚标准提出的改进建议，可寄往澳大利亚标准局总公司。若发现澳大利亚标准中出现任何错误或含糊之处，请立即通知我们，以便我方调查问题并采取适当措施。This Standard was issued in draft form for comment as DR 9
10、0065.本 标准 作为 DR 90065 草案发布，以征求意见。Australian Standard澳大利亚标准 Fixed platforms, walkways, stairways and ladders Design, construction and installation固定平台、走道、楼梯与梯子的设计、施工与安装First published as AS CA10-1938.首次刊印作为 AS CA 10-1938Second edition 1963. Third edition 1966. Fourth edition 1971第二版 1963 年，第三版 1966 年
11、，第四版 1971 年. Revised and redesignated AS 1657-1974.修订后并重新命名为 AS 1657-1974Second edition 1985. Third edition 1992.第二版 1985 年，第三版 1992 年PUBLISHED BY STANDARDS AUSTRALIA (STANDARDS ASSOCIATION OF AUSTRALIA) 1 THE CRESCENT, HOMEBUSH, NSW 2140澳大利亚标准局（澳大利亚标准协会）出版地址：1 THE CRESCENT, HOMEBUSH, NSW 2140 PREFA
12、CE序言This Standard was prepared by the Standards Australia Committee on Platforms, Gangways, Stairways and Ladders, to supersede AS 1657-1985.本标准由平台、通道、楼梯和梯子澳大利亚标准委员会编制，取代 AS 1657-1985 标准。Changes to the Standard include 本标准做出的修改包括-(a) reducing the minimum wall thickness of steel piping which may be u
13、sed;降低了可能使用的钢管的最小壁厚。(b) incorporating a minimum tensile yield stress requirement for aluminium alloys;加入对铝合金最小拉伸屈服应力的要求。(c) deleting references to specific aluminium alloys and tempers;删去对 特殊 特定铝合金及韧度调和物的介绍引述。(d) updating the dimensions of steel sections other than piping, to reflect current manufac
14、turing practices; and根据现行有效的制造规范，更新除钢管道外的型钢尺寸，以求反映当前制造规范；以及(e) provision of test methods to determine the integrity of guardrail systems, and the strength of the connection between guardrail posts and the supporting structure.提供 规定了测定护栏系统完整性以及护栏立柱与支撑结构之间接点连接强度的方法。 Copyright STANDARDS AUSTRALIA版权归澳大利
15、亚标准局Users of Standards are reminded that copyright subsists in all Standards Australia publications and software. Except where the Copyright Act allows and except where provided for below no publications or software produced by Standards Australia may be reproduced, stored in a retrieval system in a
16、ny form or transmitted by any means without prior permission in writing from Standards Australia. Permission may be conditional on an appropriate royalty payment. Requests for permission and information on commercial software royalties should be directed to the head office of Standards Australia.提醒使用标准的用户注意，澳大利亚标准局所有出版物和软件均受版权保护。除非版权法规定或满足以下条件外，在未获得澳大利亚标准局书面许可的前提下，任何人不得翻制澳大利亚标准局发行的出版物或软件，也不得以任何形式储存在检索系统中或经任何形式传播。许可可能附有一定条件或支付适
