《上海汇普工业化学品有限公司广州办事处》由会员分享,可在线阅读,更多相关《上海汇普工业化学品有限公司广州办事处(3页珍藏版)》请在金锄头文库上搜索。
1、上海汇普工业化学品有限公司广州办事处上海汇普工业化学品有限公司广州办事处 A Chemists Enterprise一个化学人的企业 广州市黄埔大道 159 号富星商贸大厦西 25 楼 邮编:510620 电话:020- 87568088 传真:020- 当地办事处 常熟 余姚 青岛 武汉 上海 香港 福州 厦门 西安 成都 重庆 雅安 北京 天津 沈阳 只要客户提出具体化学品名、商品名、CA 号码等,NCM 都会在最短的时间帮助客户找到并贴近客户的需求! Baytron P VP AI 4083 Product Information Chemical Designation/Charac
2、terization Properties and Physical Data Applications Notes on Using Baytron P VP AI 4083 Storage Conditions Standard Packaging Chemical Designation Poly(3,4- ethylenedioxythiophene) poly(styrenesulfonate) or PEDT/PSS CAS number 155090- 83- 8 Chemical Characterization Baytron P VP AI 4083 is an aqueo
3、us characterization dispersion of the intrinsically conductive polymer PEDT/PSS, or poly(3,4- ethylenedioxythiophene) / poly(styrenesulfonate) Properties and Physical Data Form liquid Odor weak Boiling point dark blue Density approximately 100 C Vapor pressure approximately 1 g/cm3 at 20 C pH value
4、1.5 to 2.5 at 20 C Solid content approximately 1 to 2% by weight Characteristic properties and physical data of Baytron P VP AI 4083 Particle size 95% smaller than 200 nm in swollen form as measured by ultracentrifuge 上海汇普工业化学品有限公司广州办事处上海汇普工业化学品有限公司广州办事处 A Chemists Enterprise一个化学人的企业 广州市黄埔大道 159 号富星
5、商贸大厦西 25 楼 邮编:510620 电话:020- 87568088 传真:020- 当地办事处 常熟 余姚 青岛 武汉 上海 香港 福州 厦门 西安 成都 重庆 雅安 北京 天津 沈阳 只要客户提出具体化学品名、商品名、CA 号码等,NCM 都会在最短的时间帮助客户找到并贴近客户的需求! Properties and Applications Baytron P VP AI 4083 has been developed particularly for use as a hole- injection layer in organic light- emitting diodes
6、(OLEDs). Baytron P VP AI 4083 has smaller particles than the standard version of Baytron P. Accordingly, smoother layer surfaces can be obtained, and electric “shorts“ in the polymer LED devices can be reduced. In addition, the occurrence of “cross- talk“ in the matrix array displays is reduced due
7、to the higher resistivity of the coating. Baytron P VP AI 4083 has been tested in the following organic LED devices: 1. glass / Indium tin oxide / Baytron P / emissive polymer / metal cathode 2. glass / Indium tin oxide / Baytron P / Type I Amine / aluminum quinolate / metal cathode Compared to devi
8、ces without an interfacial Baytron P layer: The operation voltage can be reduced. The light efficiency is increased. The lifetime of the display is increased. Notes on using Baytron P VP AI 4083 Baytron P VP AI 4083 is preferably applied by spin- coating. Filtration of the dispersion through a 0.45
9、m membrane filter is recommended before use. Structured layers can be made using ink- jet technology. The coatings are dried at a maximum temperature of 200 C for 1 minute, but a temperature between 50 C and 150 C is usually sufficient. The optimal thickness of the dried layer is in the range of 50
10、to 250 nm. 上海汇普工业化学品有限公司广州办事处上海汇普工业化学品有限公司广州办事处 A Chemists Enterprise一个化学人的企业 广州市黄埔大道 159 号富星商贸大厦西 25 楼 邮编:510620 电话:020- 87568088 传真:020- 当地办事处 常熟 余姚 青岛 武汉 上海 香港 福州 厦门 西安 成都 重庆 雅安 北京 天津 沈阳 只要客户提出具体化学品名、商品名、CA 号码等,NCM 都会在最短的时间帮助客户找到并贴近客户的需求! Baytron P VP AI 4083 must be protected from direct sunlig
11、ht and from freezing. According to experience to date, Baytron P is stable for at least 6 months when stored at 20 C in sealed containers with protection from direct sunlight. Once the container is opened, care must be taken to ensure that the dispersion does not dry on the walls of the container. Dried residue cannot be redispersed in water, and thus the optical properties of the PEDT coating could be impaired. For additional information, please refer to the Material Safety Data sheet for Baytron P VP AI 4083. Standard Packaging 1 kg or 25 kg plastic drum