《硫磺回收装置红外温测量系统》由会员分享，可在线阅读，更多相关《硫磺回收装置红外温测量系统（5页珍藏版）》请在金锄头文库上搜索。
1、 E2T 硫磺回收装置红外温度测量系统 E2T 硫磺回收装置红外温度测量系统 要对炉中复杂的生产过程进行最佳操作，就必须在生产过程中监测温度，予以控制。特别重要的是：既要防止过高的温度损害炉壁耐火材料;又要防止温度过低，在硫磺反应炉中产生铵盐堵塞转换器。 对那些使用反应炉焚化废气(如:氨及碳化氢)则必须监测温度，使之达到并保持于适当温度，才能将废气消灭。 对那些高级生产过程(如氧的浓缩)，大都涉及更高的温度需要加以密切地监测。对那些能在炉内产生易燃气体，并使炉内充斥压力的生产程序，更需使用防爆型的测温仪。 适用硫磺反应器及其他高温炉的温度检测，全世界现有 1250 多个精练厂、油气厂和化工企业
2、在使用着我们 E2T 红外测温技术.当你安装了MIKRON 公司 E2T 的耐火材料温度(RT),气体温度(GT),综合温度(FF)红外测温仪,您实际上等于购买了我们获得公认的宝贵经验,和优异的产品性价比。 适用硫磺反应器及其他高温炉的温度检测，全世界现有 1250 多个精练厂、油气厂和化工企业在使用着我们 E2T 红外测温技术.当你安装了MIKRON 公司 E2T 的耐火材料温度(RT),气体温度(GT),综合温度(FF)红外测温仪,您实际上等于购买了我们获得公认的宝贵经验,和优异的产品性价比。 特性特性 ? 不需要接触目标，可测量移动目标、腐蚀性材料，甚至在高温和很小的目标物时都可以测量?
3、 连续温度监控 ? 连续温度读取 ? 耐火材料温度(RT),气体温度(GT),综合温度(FF)红外测温测量 ? 适用于过程控制 ? 防爆设计，CSA 和 CENELEC 证书 ? 专利的窄谱 2.2m,2.6-2.9 测试技术 ? 独特的满足富氧反应炉中宽温度范围测量，最高温度可达 1925C ? 独特视窗装置可以精确的照准目标，可拆除设计便于无须停工进行清洗。 ? 应用范围非常广泛，包括硫化炉、玻璃、熔融金属、回收锅炉等的测量。 技术规格技术规格 温度范围：205-1650o C 稳定性：0.20% 精度：读数的 1%或5（取大值） 功能认证：内部系统操作电路，所有单元标准化 响应时间：1
4、或 5 秒 传感器输出： 4-20mA 线性输出 发射率：0.01 到 0.99 数字辐射率可调 目标尺寸：150:1 聚焦范围 20”到无穷大，标准 安装：3” 150 or 300# RF 或 2” 150 光谱范围：窄谱 2.2m (FF),2.6-2.9(GT) 电源： 115VAC 或 230VAC, 10%, 50 或 60 Hz, 15 w无加热器; 90 w 带加热器 防爆等级： CSA: Class 1, Division 1, Groups C Class 1, Division 2, Groups ABCClass 1, Division 2, Groups A-D CE
5、NELEC: EExd IIB T4 环境要求 4-52或-40-100（带内部加热和冷却） 体积 27 x 32 x 22 cm 重量 28.6 kg 引燃火焰引燃火焰 对引燃火焰和外排气体进行连续监控非常重要，以确保气体被点燃以及满足政府对燃烧时间的限制。热电偶失效、火焰运动、发光度变化不定以及不利的气候条件等等，都可能影响长期监控的可信度而造成错误报警。引燃火焰和外排气体进行连续监控非常重要，以确保气体被点燃以及满足政府对燃烧时间的限制。热电偶失效、火焰运动、发光度变化不定以及不利的气候条件等等，都可能影响长期监控的可信度而造成错误报警。 烟尘烟尘 对火把烟囱是否有过量烟尘进行连续监控也
6、非常重要，以保证充分燃烧。为了满足安全和环境的要求，变化不定的外界条件需要对蒸汽随时做出调整。实时自动制动控使得不再浪费蒸汽，取而代之的是成本的节约。 PULSAR II 7000 The PULSAR II Non-Contact Infrared Pyrometer is a powerful process control tool. It can measure temperature through flame, glass, plastics, and a variety of gases without affecting the reading, or, alternative
7、ly, it can measure the temperature of these and many other items. Because contact with the object being measured is not required, it can measure the temperature of moving products, hazardous or corrosive materials, extremely high temperatures and very small specimens. To achieve accurate temperature
8、 readings, the proper electromagnetic spectral range must be selected for measurement. The PULSAR II is available in a wide range of spectral settings from 0.8 to 5 microns. E2Technology will analyze your particular process to select the correct PULSAR II model for your job. The PULSAR II is availab
9、le in three different housings. The standard housing is suitable for laboratory use where the instrument will be in relatively controlled conditions. The EH-2 environmental housing is sealed against the elements and allows heating and cooling options to be added which keep the electronics within the
10、 specified operating temperature range. The explosion proof housing is CSA and CENELEC rated for use in classified areas. It has a built-in cooling base and aloows for optional heating to be added. The PULSAR II has a wide range of applications including Sulfur Recovery Furnace,Recovery Boiler, Glas
11、s, and Molten Metal temperature measurement. Specifications TEMPERATURE RANGE 400-5500F (205-3038C) 400-3000F (205-1650C) in a SINGLE LINEAR SPAN STABILITY 0.20% ACCURACY 1% Reading or 5C whichever is greater, 1 digit FUNCTIONAL VERIFICATION Internal system operation circuit, standard all units RESP
12、ONSE TIME 10 milliseconds to 95% Full Scale minimum response time 30 milliseconds or 1 second, standard Longer response times available for specific applications SENSING HEAD OUTPUTS 1 mV/F or 1 mV/C 4-20mA linear output, specify F or C at order Optional closure alarm setpoint, adjustable full span,
13、 outputs for both normal open and normal closed, rated 1 amp at 110VAC; 2 amp at 28VDC EMISSIVITY RANGE 0.1 to 1.0 analog; 0.01 to 0.99 digital emissivity switch TARGET SIZE 0.01 inch (0.4 mm) minimum target size FOCUSING RANGE 2.8 inch to infinity with field interchangeable lenses SPECTRAL RANGE 0.
14、8 micron to 5 micron POWER REQUIREMENTS 115VAC or 230VAC, 10%, 50 or 60 Hz, 15 watts without heater; 90 watts with heater Optional 24VDC available AMBIENT TEMPERATURE LIMITS +40 to 125F (+4 to 52C) with no cooling +40 to 175F (+4 to 79C) with water cooled base -40 to 125F (+4 to 52C) with internal h
15、eater WARM-UP TIME 10 minutes DIMENSIONS CSA/CENELEC Explosion-proof Housing: 7.5“(H), 10.5“(W), 10.5“(L) EH-2 Housing: 4.5“(H), 8.5“(W), 8.5“(L) Standard Housing: 3.3“(H), 7.5“(W), 10.5“(L) EXPLOSION PROOF RATINGS CSA: Class 1, Division 1, Groups C Class 1, Division 2, Groups ABC&D, T4A CENELEC: EE
16、xd IIB T4 E2T / Mikron Infrared Inc. is the sole manufacturer and designer of this product. This product is manufactured in the Mikron Infrared Inc. plant located at 16 Thornton Road, Oakland, New Jersey 07436. Mikron Infrared Inc. retains exclusive rights to the internal design and trade dress of this instrument. 1969-2001 Mikron Instrument Company, Inc.
