《油浸式电流互感器简介》由会员分享，可在线阅读，更多相关《油浸式电流互感器简介（24页珍藏版）》请在金锄头文库上搜索。
1、 湖南华联火炬电瓷电器有限公司 油浸式电流互感器简介Brief introduction to Oil-immersed Current Transformer本产品符合国家标准 GB1208-2006电流互感器和国际电工委员会标准 IEC 60044-1：2003互感器 第 1 部分：电流互感器的要求，主要供 35kV、110kV、220 kV，50Hz 电力系统作电流、电能测量和计量及继电保护用。The products comply with the requirements of GB1208-2006 “Current Transformer” and International E
2、lectro technical Commission IEC 60044-1：2003 “Instrument Transformers Part-1 Current Transformers”. It is mainly used for current and electric energy measurement and relay protection for 35kV, 110kV and 220kV, 50Hz power system.产品安装地点的环境温度为-30+40，海拔不超过 1000m，高原型产 品海拔不超过 3500m。普通型产品适用于一般地区，耐污型产品适用于 、
3、级污秽地区，组合型产品专与隔离开关配套成组合电器。Environmental temperature of its assembly place is -30+40, altitude above sea level shall not exceed 1000m, Altitude for plateau type product shall not exceed 3500m. Common product apply to common place, Anti-pollution products can apply to 、 pollution area, Composite type p
4、roducts form composite electrical apparatus specialty combining with isolating switch.产品型号表示方法及字母意义：Way of showing the type of product and meaning of letters:产品型号：L电流互感器，V倒立式，B有保护级，T具有暂态特 性，C瓷绝缘，W户外型，A结构型式为“链”型，N油保护方式不带 金属膨胀器。 特殊要求：TA适用于干热地区；TH适用于湿热地区；GY适用于高 原地区；ZH与隔离开关配套；W1适用于级污秽地区；W2适用于级 污秽地区；W3适用
5、于级污秽地区。湖南华联火炬电瓷电器有限公司 说明： (1)以下所列技术参数仅供设计或选用时参考，可随用户的要求不断改进， 各种产品的主要技术参数以产品的铭牌为准 (2)我厂产品型号按新标准要求，经批准注册，原 LCWB-110，LCWB-220 型分别改型为 LB7-110，LB9-220 型，并重新通过了国家电力公司和国家机械 工业局联合组织的批量生产鉴定。Type of product: LCurrent Transformer, VInverted type, BWith Protective Class, TTransient performance，CPorcelain insula
6、tion，WOutdoor type. Athe structure is with chain type, N Oil protection without metal expander.Special requirements: TAApply to dry and hot area, THApply to humid and hot area, GYApply to plateau area, ZHcombining with isolating switch, W1Apply to class pollution area, W2Apply to class pollution are
7、a, W3Apply to class pollution area.Note：(1)The following listed technical parameters are only for reference when design and selection. It can be improved as required by customers. All kinds of main technical parameters are based on nameplate of product.(2)Product type of our factory comply with the
8、new standard, upon approval and registration, former LCWB-110, LCWB-220 are changed into LB7-110, LB9220, and the products has passed again batch production. Appraisal organized by National Power Company and National Mechanical Industry Bureau.LCWB-35W 和 LABN-35W 型电流互感器由器身、金属膨胀器、瓷套、底 座等组成，系全密封结构。器身呈
9、“8”字形，上半部分为一次绕组，下半部为 二次绕组。Current transformer with type of LCWB-35W and LABN-35W is composed by body, metal expander, porcelain shell, base and so on, the products are full-sealed structure. Its structure appears like the number “8”. The upper part is primary winding, the lower part is secondary win
10、ding.LVB-35W 和 LVBT-35W 型电流互感器采用油纸倒立式全密封结构。主要 由躯壳、底座、瓷套、金属膨胀器、器身，一次导杆、一次出线装置和二次出 线盒等部分组成。器身为吊环形，主绝缘全部包在二次绕组上，一次、二次绕 组均置于产品的头部，产品内充变压器油，膨胀器装在躯壳上部起全密封和油 温变化时体积补偿作用。该型产品是一种低漏磁电流互感器，没有返回导体电 流产生的磁场对二次绕组的干扰，这样提高了二次绕组的保护、测量和计量的 准确度。该型产品的介质损耗因数小、局部放电量低；该型产品的额定一次电 流可达数千安，可保证足够大的动热稳定电流；该型产品可以任意组合二次绕 组，带负载能力强，
11、可带多种变比抽头，从而实现各种规格的测量和保护的需 要；可以按用户要求带 TPY 绕组，从而满足用户快速继电保护的要求。Current transformer with the type of LVB-35W and LVBT-35W is with oil-paper inverted full-sealed structure. It is consist of shell, base, porcelain bushing, metal expander, body, primary pole, primary terminal device and secondary terminal
12、box and so on. Body is ring shaped, main insulation is wound round the secondary winding, primary winding and secondary winding are on the top of the products, the products are full with oil transformer, expandar is fixed on the top of the body shell working as volume compensation and full-sealing w
13、hen oil temperature changes. The CT is with low leaking-magnetization, and without interference caused by magnetic field which is without returning-conductor current to secondary winding, therefore, protection accuracy and measurement accuracy and calculation accuracy of secondary winding are improv
14、ed. This CT is with low 湖南华联火炬电瓷电器有限公司 dielectric loss and low partial discharge. Its rated primary current is up to several kilo amperes, adequate dynamic current is guaranteed. its secondary winding can be combined at random. And it is with strong load and with taps with several ratios so that the
15、 product can reach the requirements of measurement and protection. TPY winding can be provided according to consumer requirements, therefore, the consumers can quickly reach the requirements of relay.LB7-110W 和 LB9-220W 型电流互感器产品由油箱、瓷套、金属膨胀器、 器身、一次出线装置和二次出线盒等部分组成，属全密封结构。器身包括一次 绕组和二次绕组，经真空干燥和浸渍处理后，浸于变压器油中，变压器油经真 空过滤，作充分的脱水、脱气处理。整个产品绝缘电气强度高，且介质损耗和 局部
