《机械电子工程专业论文23736》由会员分享,可在线阅读,更多相关《机械电子工程专业论文23736(41页珍藏版)》请在金锄头文库上搜索。
1、本科毕业设计(论文)说明书本科毕业设计(论文)说明书光驱类产品的数字化建模与运动仿真光驱类产品的数字化建模与运动仿真摘 要摘 要光驱类产品工业生产的蓬勃发展,使得光驱类产品制造技术也必须不断改进。随着经济全球化的发展,产品的市场竞争日趋激烈,客户对产品多样化和个性化的要求愈加迫切。市场竞争的核心是产品创新,产品创新主要体现在对客户的响应速度和响应品质上。虚拟制造技术是许多先进学科领域知识的综合集成与应用,它以参数化建模技术,计算机仿真技术,分析优化技术为基础,在产品设计阶段或产品制造之前,实时、并行地模拟出产品的未来制造全过程及其对产品设计的影响,预测产品的性能、成本和可制造性, 以达到产品的
2、开发周期和成本的最优化,生产效率的最高化之目的。本文中将阐述国内外虚拟制造技术的研究状况和发展趋势,针对现有光驱类产品设计中的不足,将虚拟制造技术引入光驱类产品设计领域。在研究光驱类产品设计的基础上,利用Autodesk Inventor 2009,采用参数化设计方法,构建了光驱类产品的三维实体模型,并进行虚拟装配,建立光驱类产品的虚拟样机。利用装配运动对模型进行碰撞、干涉检测,验证模型的正确性。最后,利用Inventor Studio 对模型进行渲染,输出静态效果图与运动动画。关键词关键词:光驱类产品;CAD;参数化设计;虚拟装配;渲染;Inventor;AbstractIIAbstract
3、 Products drive the rapid development of industrial production, making products manufacturing technology drive must also be continuous improvement. With the development of economic globalization, market competition becomes increasingly fierce, customer diversification of products and individuality m
4、ore urgent requirements. Market competition is the core of product innovation, product innovation is mainly embodied in the response time to customers and respond to quality. Virtual manufacturing technology is advanced in many fields of knowledge and application integration, which parametric modeli
5、ng technology, computer simulation technology, analysis and optimization technology, in product design stage or prior to product manufacturing, real-time, in parallel to simulate the products the future of the whole process of manufacturing and its impact on product design, forecasting performance,
6、cost and manufacturability in order to achieve the product development cycle and cost optimization, the maximum efficiency of production purposes. In this paper, both at home and abroad will be on the Virtual Manufacturing Technology Research status and development trend of optical products for the
7、existing design deficiencies, the introduction of virtual manufacturing technology to drive the field of product design category. CD-ROM products in the study design, based on the use of Autodesk Inventor 2009, using parametric design methods, to build a CD-ROM products of the three-dimensional soli
8、d model, and virtual assembly, the establishment of a virtual CD-ROM prototype products. Assembly movement using the model of collision and interference detection, verification of the correctness of the model. Finally, the use of Inventor Studio Rendering the model, the effect of the output static m
9、ap with animated movements.KeyKey words:words: CD-ROM Products ;CAD;Parametric Design;Virtual Assembly;Render; Inventor目 录目 录摘 要 .IAbstract.II目 录.III 第一章 绪 论.1 1.1 本课题的研究背景和意义.1 1.2 CAD 技术的起源和发展 .2 1.2.1CAD 技术的产生及发展过程.2 1.2.2 CAD 系统的构成及分类.3 1.2.3CAD 技术的发展趋势.4 1.3 虚拟装配.6 1.4 本课题研究内容.7 第二章 光驱产品的三维建模.8 2.1Autodesk Inventor 介绍.8 2.2 光驱产品的三维建模.8 2.2.1 托盘进出装置的介绍.11 2.2.2 外壳的介绍.16 2.2.3 内部机构的介绍.18 2.3 本章小结.19 第三章 光驱产品的虚拟装配.20 3.1Inventor 装配环境介绍.20 3.2 光驱的几何约束装配.