毕业设计-基于AT89C51单片机的蔬菜大棚温室温度自动控制系统设计

上传人:飞*** 文档编号:3105173 上传时间:2017-07-30 格式:DOC 页数:42 大小:445.50KB
返回 下载 相关 举报
毕业设计-基于AT89C51单片机的蔬菜大棚温室温度自动控制系统设计_第1页
第1页 / 共42页
毕业设计-基于AT89C51单片机的蔬菜大棚温室温度自动控制系统设计_第2页
第2页 / 共42页
毕业设计-基于AT89C51单片机的蔬菜大棚温室温度自动控制系统设计_第3页
第3页 / 共42页
毕业设计-基于AT89C51单片机的蔬菜大棚温室温度自动控制系统设计_第4页
第4页 / 共42页
毕业设计-基于AT89C51单片机的蔬菜大棚温室温度自动控制系统设计_第5页
第5页 / 共42页
点击查看更多>>
资源描述

《毕业设计-基于AT89C51单片机的蔬菜大棚温室温度自动控制系统设计》由会员分享,可在线阅读,更多相关《毕业设计-基于AT89C51单片机的蔬菜大棚温室温度自动控制系统设计(42页珍藏版)》请在金锄头文库上搜索。

1、河北联合大学轻工学院毕业设计说明书 第 1 页 共 41 页摘 要中国农业的发展必须走现代化农业这条道路,随着国民经济的迅速增长,农业的研究和应用技术越来越受到重视,特别是温室大棚已经成为高效农业的一个重要组成部分。现代化农业生产中的重要一环就是对农业生产环境的一些重要参数进行检测和控制。本系统以 AT89C51 单片机为控制核心,利用温度传感器 AD590 对蔬菜大棚内的温度进行实时采集与控制,实现温室温度的自动控制。本系统由单片机系统模块、温度采集模块、加热模块、降温模块、按键以及显示模块六个部分组成。可以通过按键设定温室的温度值,采集的温度和设定的温度通过 LED 数码管显示。当所设定的

2、温度值比采集的温度大时,通过加热器加热,以达到设定值;反之,开启降温风扇,以快速达到降温效果。通过该系统,对蔬菜大棚内的温度进行有效、可靠地检测与控制,从而保证大棚内作物在最佳的温度条件下生长,提高质量和产量。关键词:单片机;温度传感器;温度显示;键盘输入;温室河北联合大学轻工学院毕业设计说明书 第 2 页 共 41 页AbstractDevelopment of Chinas agricultural must take this path of modern agriculture, with the rapid growth of the national economy, agricu

3、ltural technology of research and application takes more and more attention, especially in greenhouses which have become an important part of effective agriculture. One of the important parts of modern agricultural production is some important parameters for detection and control. This system takes

4、the AT89C51 single chip as the control core, using the temperature sensor AD590 to carry on real-time gathering and controlling to the greenhouse of vegetables, so it can realizes auto-control to the greenhouses temperature. This system contains the miniature single chip system module, the temperatu

5、re gathering module, the heater module, the drop-temperature module, the key pressed module and the display module. The gathering temperature or the setting temperature is displayed through the seven-seg LED. It can be established new temperature value in the greenhouse through pressing buttons, whe

6、n this temperature value is higher than the gathering temperature value, then makes the heater work in order to achieve the defined value; Otherwise, the heater knocks off, and opens the ventilator as fast as to achieve the supposed temperature. It will be effective and reliable to exam and control

7、the temperature of the greenhouse by using this system, thus guarantee the crop growing fine under the best temperature condition, and enhances the crops quality and output.Key words: Single chip,Temperature sensor, Temperature control, Temperature display, Keyboard entry,Greenhouse 河北联合大学轻工学院毕业设计说明

8、书 第 3 页 共 41 页目录摘 要 .1ABSTIC.2第 1 章绪论 .51.1 课题背景及意义 .51.2 国内外温室控制技术发展概况 .61.3 本文的主要工作 .7第 2 章温室控制系统的总体设计.92.1 温室环境因子.92.2 控制系统设计要求 .92.3 控制系统总体设计.10第 3 章 温室控制系统硬件设计.123.1 基于 AT89C51 的单片机系统 .123.1.1 时钟脉冲 .133.1.2 复位电路 .133.2 温度采集模块 .133.2.1 温度转换器 ADC0804 的功能 .153.3 显示模块 .173.3.1 译码 IC 7447.173.3.2 七段 LED 数码管 .183.4 键盘扫描 .

展开阅读全文
相关资源
相关搜索

当前位置:首页 > 学术论文 > 毕业论文

电脑版 |金锄头文库版权所有
经营许可证:蜀ICP备13022795号 | 川公网安备 51140202000112号