《wifi远程智能台灯摄像机双语中英文操作说明书》由会员分享，可在线阅读，更多相关《wifi远程智能台灯摄像机双语中英文操作说明书（31页珍藏版）》请在金锄头文库上搜索。
1、Wifi Remote Intelligent Table LampForewordThis manual provides a brief introduction to how to use the product and details for product use and operation. Please be sure to carefully read and completely understand the manual before use and keep it properly. We hope our product can meet your demands an
2、d serve you for a long time.Product AssuranceThis product is certified by FCC&CE and other authorities to conform to the recommended indicators. Customer safety is assured in use.Product features1. It has a stylish appearance, and the table lamp body adopts three-dimensional UV treatment.2. Remote t
3、alkback.3. Remote and local lamp opening and closing.4. Eyesafe lamp beads.6. Photographing, video recording, night vision, sound recording, motion detection and alarm.7. Point-to-point connection, can work without a network connection.8. APP zoom Instruction for quick operation of network surveilla
4、nce cameraThis product is a 25-frame HD (1,080P) network camera intelligent table lamp with an external TF card and a multi-functional high-tech product integrating functions of video recording, photographing, night vision, illumination, motion detection alarm, APP real-time monitoring, and storage.
5、 It has a function of 5 megapixel HD recording, and supports up to 32GB TF card, long-time work and APP operation, which makes it more convenient. Moreover, it works as the best anti-theft and evidence-gathering tool with strong concealment.1. Product structure1. Camera 2. Night vision lamp 3. Eyesa
6、fe lamp 4. Microphone 5. Wifi connection indicator light 6. Equipment status indicator light 7. Table lamp switch 8. Reset key 9. Loudspeaker 10. ON/OFF 11. Night vision lamp switch 12. TF card1. APP software download (Picture 1) (Picture 2)Method 1: Scan the QR (picture 1) code directly to go to th
7、e download screen (picture 2). Select appropriate download software according to your mobile phone system.(Note: This kind of installation is only available for Chinese Mainland).Method 2: For Android phones, search for APP software named RMON in Google Play, download and install it.For IPhone, APP
8、software named RMON in AppStore, download and install it.2. Installation 1. Plug in the charger, connect the power supply, and turn on the ON/OFF switch of the device. (The device starts up 30 seconds later and the blue light keeps on while the red light flashes quickly).2. Flashes quickly for 30 se
9、conds, it means the device is searching for wifi that is connected before. (In this mode, the device will automatically connect to the network that is connected before after the device is power off).3. If there is no wifi found after searching, the device will restart automatically (it takes 30 seco
10、nds). After restart, the blue light keeps on while the red light flashes slowly. (In this mode, the device is transmitting wifi hotspot for search connection of your mobile phone).4. When the red indicator light flashes slowly (2 minutes after starting up), use your mobile phone to search for wifi h
11、otspot (begin with YM) for connection and exit. After that, enter in the downloaded APP and set the configuration of router network. (Specific operation steps are shown as below).3. Wifi connection 1 (for iphone)1. Search for wifi hotspot for connection2. Open the APP when a wifi icon appears;3. Cli
12、ck to add it. 4. Select a path to add;5. Enter in or scan the UID code of QR code of the device.6. Select or enter in the name and passwords of wifi before setting configuration. 7. Search 8. Confirm 9. Done3. When it says “Wifi configuration completed”, the device will restart again. Both the blue
13、and red indicator light will keep on for 30 seconds after the device starts up (It means the device is connected to network when the red indicator light keeps on).4. App is ready to add and search for camera by now (under the same network environment).4. Point-to-point connection (without network co
14、nnection)1. Search for wifi hotspot for connection on mobile phone-open APP-click -select -search-confirm-connection completed (the blue light keeps on while the red light flashes slowly)5. Connection method 2 (point-to-point connection to router network) 2. Search for wifi hotspot for connection on
15、 mobile phone-open APP-click -select -search-confirm-connection completed-click to set the camera-select advance configuration-select wifi connection-select a wifi-enter in passwords-connect (30 seconds after the camera restarts automatically, both the blue and red indicator light for camera connect
16、ion will keep on)6. Lamp opening and talkback. 1. Click to remotely turn on the illumination lamp, and drag to adjust the brightness.2. Click to remotely turn on the night vision lamp.3. Click the microphone , and then press to talk, and voice will be automatically sent to the device side after release.7. Screen shot, video recording and alarm1. Click the on
