《车辆工程毕业设计(论文)-解放后双桥冷藏汽车改装设计【全套图纸】》由会员分享,可在线阅读,更多相关《车辆工程毕业设计(论文)-解放后双桥冷藏汽车改装设计【全套图纸】(46页珍藏版)》请在金锄头文库上搜索。
1、 I摘 要随着改革开放的不断深入,经济建设和人民生活对冷藏汽车的需求越来越来迫切,使用的覆盖面越来越来广泛,需求量也越来越来大。方便灵活的冷藏汽车在我国冷藏运输中扮演了越来越重要的角色。冷藏保温汽车是冷藏运输用的专用汽车,用来运输易腐货物和对温度有特殊要求的货物。本 设 计 以 一 汽 解 放 悍 威 J5M 汽 车 二 类 底 盘 为基 础 , 改 装 设 计 为 大 型 冷 藏 汽 车 , 该 车 冷 藏 箱 通 过 焊 接 安 装 在 副 车 架 上 。 冷 藏 车 厢既 有 隔 热 保 温 作 用 , 又 安 装 有 制 冷 机 组 制 冷 , 满 足 冷 藏 车 的 冷 藏 温 度
2、-4 的 设 计要 求 。 运 输 途 中 压 缩 机 通 过 皮 带 由 发 动 机 驱 动 。全套图纸,加关键词:冷 藏 运 输 ;冷 藏 保 温 汽 车 ;专 用 汽 车 ;隔 热 保 温 ;制 冷 机 组 IIABSTRACTWith the continuous deepening of reform and opening up, economic construction and peoples growing demand for refrigerated vehicles to pressing to use more and more extensive coverage,
3、 demand is also growing to large. Convenient and flexible in our refrigerated transport refrigerated vehicles play an increasingly important role. Refrigerated vehicles are used in special refrigerated transport vehicles used to transport perishable goods and have special requirements on the tempera
4、ture of the goods. The design FAW Hanwei J5M two types of chassis-based vehicles, modified design for large refrigerated cars, car refrigerator mounted by welding on the subframe. The role of both thermal insulation cold storage compartment, and a refrigeration unit installed refrigeration, refriger
5、ated trucks to meet the temperature of -4 refrigeration design requirements. Transit through the belt by the engine-driven compressor.Key words:Refrigerated Transport; Refrigerated vehicles; Special Vehicle Design; Insulation; Refrigeration unit 目 录摘 要 IAbstractII第 1 章 绪 论 11.1 改装冷藏汽车的目的和意义 11.2 国内外
6、现状及发展前景 21.2.1 国内外发展现状 21.2.2 冷藏汽车的发展前景 31.3 课题主要内容 3第 2 章 总布置方案及二类底盘参数 52.1 整车总布置 52.2 二类底盘参数 52.3 本章小结 7第 3 章 车厢设计 83.1 车厢尺寸参数的确定 83.1.1 车厢外廓尺寸 83.1.2 车厢内尺寸 83.2 车厢结构与设计 83.2.1 车厢骨架结构设计 83.2.2 蒙皮的设计 113.2.3 隔热车厢的结构型式 113.2.4 隔热层材料选择和设计 123.3 车厢后门、密封条的设计 133.3.1 车厢后门的设计 133.3.2 密封条的设计 133.4 热平衡计算 143.5 本章小结 16第 4 章 副车架的设计 174.1 副车架设计