《【AS澳大利亚标准】AS NZS .- Structural steel welding - Part Welding of steel structuere》由会员分享，可在线阅读，更多相关《【AS澳大利亚标准】AS NZS .- Structural steel welding - Part Welding of steel structuere（104页珍藏版）》请在金锄头文库上搜索。
1、Licensed to Mr Willie Raith - Voest A on 12 Nov 2002. Single user licence only. Storage, distribution or use on network prohibited.AS/NZS 1554.1AS/NZS 1554.1:2000Australian/New Zealand StandardStructural steel weldingPart 1:Welding of steel structuresThe Standard is downloaded from Standard Sharing
2、AS/NZS 1554.1:2000This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee WD/3, Welding of Structures. It was approved on behalf of the Council of Standards Australia on 9 June 2000 and on behalf of the Council of Standards New Zealand on 3 July 2000. It was published on
3、 2 September 2000.The following interests are represented on Committee WD/3:Association of Consulting Engineers Australia Australian Chamber of Commerce and Industry Australian Industry GroupAustralian Institution of Steel ConstructionAUSTROADSBureau of Steel Manufacturers of AustraliaElectricity Su
4、pply Association of AustraliaInstitute of Engineers AustraliaLicensed to Mr Willie Raith - Voest A on 12 Nov 2002. Single user licence only. Storage, distribution or use on network prohibited.New Zealand Heavy Engineering Research AssociationNew Zealand Non-destructive Testing AssociationSteel Reinf
5、orcement Institute of AustraliaUniversity of SydneyWelding Technology Institute of AustraliaKeeping Standards up-to-dateStandards are living documents which reflect progress in science, technology and systems. To maintain their currency, all Standards are periodically reviewed, and new editions are
6、published. Between editions, amendments may be issued. Standards may also be withdrawn. It is important that readers assure themselves they are using a current Standard, which should include any amendments which may have been published since the Standard was purchased.Detailed information about join
7、t Australian/New Zealand Standards can be found by visiting the Standards Australia web site at .au or Standards New Zealand web site at www.standards.co.nz and looking up the relevant Standard in the on-line catalogue.Alternatively, both organizations publish an annual printed Catalogue with full d
8、etails of all current Standards. For more frequent listings or notification of revisions, amendments and withdrawals, Standards Australia and Standards New Zealand offer a number of update options. For information about these services, users should contact their respective national Standards organiz
9、ation.We also welcome suggestions for improvement in our Standards, and especially encourage readers to notify us immediately of an y apparent inaccuracies or ambiguities. Please address your comments to the Chief Executive of either Standards Australia International or Standards New Zealand at the
10、address shown on the back cover.This Standard was issued in draft form for comment as DR 98630.Licensed to Mr Willie Raith - Voest A on 12 Nov 2002. Single user licence only. Storage, distribution or use on network prohibited.AS/NZS 1554.1:2000Australian/New Zealand StandardStructural steel weldingP
11、art 1:Welding of steel structuresOriginated in Australia as AS CA81933.Originated in New Zealand, in part, as NZS 4701:1981 and NZS 4704:1994.Previous edition AS/NZS 1554.1:1995. Sixth edition 2000.COPYRIGHT Standards Australia/Standards New ZealandAll rights are reserved. No part of this work may b
12、e reproduced or copied in any form or by any means, electronic or mechanical, including photocopying, without the written permission of the publisher.Jointly published by Standards Australia International Ltd, GPO Box 5420, Sydney, NSW 2001 and Standards New Zealand, Private Bag 2439, Wellington 602
13、0ISBN 0 7337 3483 9AS/ NZS 1554.1:20003The Standard is downloaded from Standard SharingPREFACEThis Standard was prepared by the Joint Standards Australia/Standards New Z ealand Committee WD/3,WeldingofStructures,tosupersedeAS/NZS 1554.11995, NZS 4701:1981, Metal-arc welding of steel structures, and
14、 NZS 4704:1994, Structural steel weldingWelding of steel structures.The objective of this Standard is to provide rules for the welding of a wide range of steel constructions and while it is expected that its main use will be for statically loaded welds, it applies also to some welds subject to fatigue. Although this Standard has been specifically prepared for steel structures, it may be usefully applied to machine frames and other types of steel constructions.This edition incorporates the following major changes to the 199
