《System Reference CodesWindows系统 电脑资料》由会员分享，可在线阅读，更多相关《System Reference CodesWindows系统 电脑资料（33页珍藏版）》请在金锄头文库上搜索。
1、System Reference CodesWindows系统 电脑资料 IPLSRCFormatDescription: AsthesystemperformsanIPL,SRCsappearonthecontrolpanel.TheSRCs indicatethestatusoftheIPLandareoftenusefulinproblemanalysis. ThefollowinglistprovidesinformationontheIPLprocessandshowssome SRCs(innumericorder)thatcanap IPL SRC Format Descript
2、ion: As the system performs an IPL, SRCs appear on the control panel. The SRCs indicate the status of the IPL and are often useful in problem analysis. The following list provides information on the IPL process and shows some SRCs (in numeric order) that can appear during an IPL. IPL SRC Function Pe
3、rformed C1xx 1xxx Service Processor ROS IPL in progress C1xx 1006 Service processor ROS loading RAM from MFIOP directed device C1xx 1007 Service Processor ROS retrying attempt to load RAM from MFIOP directed device C1xx 1008 Service Processor ROS attempting to load RAM from non-MFIOP directed device
4、 C1xx 1009 Service Processor ROS retrying attempt to load RAM from non-MFIOP directed device C1xx 1016 Service Processor ROS attempting to load RAM from MFIOP default device C1xx 1018 Service Processor ROS attempting to load RAM from non-MFIOP default device C1xx 1019 Service Processor ROS retrying
5、attempt to load RAM from non-MFIOP default device C1xx 100C Service processor ROS IPL plete, branch to RAM Loader C1xx 1030 Loading Service Processor system LIC from MFIOP device C1xx 1050 Loading Service Processor system LIC from non-MFIOP device C1xx xx Service Processor is setting up to test and
6、load system processor C1xx xx Service processor is testing system processor and main storage C1xx xx Service processor is loading system processor C100 2034 LIC (system) has been initialized; control has passed to system processor C1xx 2050 Service Processor is waiting for Load Source device C1xx 20
7、60 Service Processor started a read mand from Load Source C1xx 2090 Service Processor pleted a read mand from load source C1xx 80xx Service Processor/Control Panel munication in progress C1xx 805x Service Processor is loading Control Panel LIC C1xx B1xx Basic assurance test pleted on MFIOP C100 D009
8、 LIC (system) running initialization C200 1xxx Secondary Partition Early IPL Initialization Phase C200 1100 Adding partition resources to the secondary configuration C200 11FF Partition resources added suclearcase/ target=_blank essfully C200 2xxx Secondary Partition SP Tower Power ON Phase C200 120
9、0 Checking if IPL is allowed C200 12FF Partition IPL is allowed to proceed C200 1300 Initializing ISL roadmap C200 13FF ISL roadmap initialized suessfully C200 1400 Initializing SP Communication Area #1 C200 1410 Initializing IPL parms C200 14FF IPL parms initialized suessfully C200 3xxx Secondary P
10、artition Bus Unit ISL Phase C200 3100 Validating ISL mand parameters C200 3111 Waiting for Bus object to bee operational C200 3112 Waiting for bus unit to bee disabled C200 3150 Sending ISL mand to bus unit C200 31FF Waiting for ISL mand pletion C200 32FF ISL Command plete suessfully C200 4xxx Secon
11、dary Partition Load Source Device Connection Phase C200 4100 Waiting for load source device to enlist C200 4200 Load source device has enlisted C200 4300 Preparing connection to load source device C200 43FF Load source device is connected C200 5xxx Secondary Partition Main Storage Dump Phase C200 51
12、00 Preparing to initiate MSD phase C200 5110 Loading SID 82 from load source device C200 5115 MSD Phase I C200 5120 Writing processor registers into SID 82 C200 5125 MSD Phase II C200 5130 Writing mainstore pages to the load source device C200 5135 MSD Phase III C200 5140 Storing (final) SID 82 back
13、 to the load source device C200 5150 Allocating the hardware page table C200 51FF MSD processing plete C200 6xxx Secondary Partition Load LIC from Load Source Phase C200 6000 Locating First LID information on the loadsource C200 6010 Locating Next LID information on the loadsource C200 6020 Verifyin
14、g LID information C200 6030 Priming LP Configuration LID C200 6040 Preparing to initiate LID load from loadsource C200 6050 LP Configuration LID primed suessfully C200 6060 Waiting for LID load to plete C200 6100 LID load pleted suessfully C200 7xxx Secondary Partition Load Source Device Disconnectio
