《HDMI-AF-22规格书.doc》由会员分享，可在线阅读，更多相关《HDMI-AF-22规格书.doc（5页珍藏版）》请在金锄头文库上搜索。
1、东莞市桂氏咏华实业有限公司制 品 规 格 书PRODUCT SPECIFICATIONS规格编号SPEC NOH10U0259版本VERSIONA系列 SERIESHDMI 母头(DIP)日期 DATE2011.7.19制品名称 DESCRIPTONHDMI-AF-22页数 PAGE1共 OF41.0 RATING 额定值: 40V DC / 0.5 A DC2.0 CIRCUIT 回路3.0 TIMING 切换类型: SHORTING4.0 TEST CONDITON 测式条件Unless otherwise specified herein, all measurements and te
2、sts shallbe made at temperature of -2585 and relative humidity of 45%95%.除特别注明时，使用温度范围-2585:使用湿度范围45%95%.5.0 CONSTRUCTION 构造5.1 Shape and dimensions are subject to drawing. 形状、尺寸依照制品图而规定。5.2 Appearance: every part should not allowed to exist rust、 crack and poor plating. 外观:各部位应良好无生锈、裂痕、电镀不良现象。6.0 E
3、LECTRICAL PERFORMANCE 电气性能 ITEM 项目TEST CONDITION 测试条件PERFORMANCE 规格6.1CONTACTRESISTANCE接触电阻Mate connectors,Contact:measure by dry circuit,20 mV MAXIMUM,10mA;Shell：measure by dry circuit,5V MAXIMUM,10mA; 配对连接器:端子:低功率电路测量,20 mV Max,10mA；外壳:低功率电路测量,5V Max,10mA。端子30 m Max；30 m 最大；外壳50 m Max；50 m 最大；6.2I
4、NSULATIONRESISTANCE绝缘电阻Unmated:Unmated connector,apply 300V DC between adjacent terminal or ground.Mated:Mated connector,apply 150V DC between adjacent terminal or ground.分离类型：分离型连接器，应用500V DC，测试相邻端子或地线。嵌合类型：嵌合型连接器，应用150V DC，测试相邻端子或地线。分离100 M Min；100 M 最小；嵌合10 M Min；10 M 最小；6.3WITHSTANDVOLTAGE耐电压Unm
5、ated:Unmated connector,apply 500V AC (rms.) for 1 minute between adjacent terminal or ground.Mated:Mated connector,apply 300V AC (rms.) for 1 minute between adjacent terminal or ground.分离类型：分离型连接器，应用500V AC(rms.)1分钟，测试相邻端子或地线。嵌合类型：嵌合型连接器，应用300V AC(rms.)1分钟，测试相邻端子或地线。No Breakdown。无击穿。东莞市桂氏咏华实业有限公司制 品
6、 规 格 书PRODUCT SPECIFICATIONS规格编号SPEC NOH10U0259版本VERSIONA系列SERIESHDMI 母头(DIP)日期DATE2011.7.19制品名称DESCRIPTIONHDMI-AF-22页数PAGE 2共OF47.0 MECHANICAL PERFORMANCE 机械性能ITEM 项目TEST CONDITION 测试条件PERFORMANCE 规格7.1Insertion Force插入力insert connectors，at a rate of per 253mm minute。插入连接器，速度253mm/分钟。44.1 N (4.5 Kg
7、f) Max；44.1 N (4.5 Kgf) 最大；7.2Withdrawal Force分离力withdrawal connectors，at a rate of per 253mm minute。分离连接器，速度253mm/分钟。After 2000 times insertion/withdrawal9.8N (1.0 Kgf) Minimum；39.2N (4.0 Kgf) Maximum；After 2001-10000 times insertion/withdrawal4.9N (0.5 Kgf) Minimum；39.2N (4.0 Kgf) Maximum；7.3Durab
8、ility耐久性Automatic cycling:10 000 cycles at 10050 cycles per hour。自动循环：10，000次，速度10050次/小时。contactresistance；接触电阻；Change form initial requirement: Contact: 30 m Max；Shell：50 m Max；初始要求变更：端子：30 m Max；外壳：50 m Max；7.4Vibration振动Amplitude：1.52 mm P-P or 147m/s215G；Sweep time：50-2000-50Hz in 20 minutes；Du
9、ration：12 times in each(total of 36 times) X，Y，Z axes；Electrical load：DC 100 Ma current shall be Flowed during the test；振幅：1.52 mm P-P or 147m/s215G；扫描时间：50-2000-50Hz，在20分钟；在每一个周期:12次，(总共36个次)，X、Y、Z轴；电力负荷:直流100mA电流流过测试期间； Appearance No DamageContact Resistance:Change form initial requirement:Contact
10、: 30 m Max；Shell：50 m Max；Discontinuity：1sec Max。外观无损坏接触电阻：初始要求变更：端子：30 m Max；外壳：50 m Max；中断：1sec Max。7.5Thermal Shock热冲击10 cycles of:a) -55 for 30 minutesb) +85 for 30 minutesAppearance No DamageContact Resistance:Change form initial requirement:Contact: 30 m Max；Shell：50 m Max；外观无损坏接触电阻：初始要求变更：端子：
11、30 m Max；外壳：50 m Max；7.6Humidity耐湿测试Mate connectors together and perform the test as follows：Temperature:+25 to +85；Relative Humidity：80 to 95%；Duration：4 cycles(96 hours)；Upon completion of the test,specimens shall be conditioned at ambient room conditions for 24 hours,after which the specified mea
12、surements shall be performed嵌合连接器在一起可以进行如下要求：温度：+25+85；相对湿度：80%95%；时间：4个周期(96小时);在完成考试,试样在房间空调环境条件后24小时内,均应由指定的测量Appearance外观No Damage无破损Contact Resistance:接触电阻：Contact：端子Resistance:from initial value: 30 m Max； Shell：Changefrom initial value:50 m Max；接触电阻：初始要求变更：端子：30 m Max；外壳：50 m Max；Unmated conn
13、ectors together and perform the test as follows：Temperature:+25 to +85；Relative Humidity：80 to 95%；Duration：4 cycles(96 hours)；Upon completion of the test,specimens shall be conditioned at ambient room conditions for 24 hours,after which the specified measurements shall be performed嵌合连接器在一起可以进行如下要求：
14、温度：+25+85；相对湿度：80%95%；时间：4个周期(96小时);在完成考试,试样在房间空调环境条件后24小时内,均应由指定的测量Appearance外观No Damage无破损Dielectric Withstanding Voltage and Insulation Resistance耐电压和绝缘电阻Conform to item of Dielectric Withstanding Voltage and Insulation Resistance；符合耐电压和绝缘电阻项目规格；8.0DURABILITY 耐久性ITEM 项目TEST CONDITION 测试条件PERFORMANCE 规格东莞市桂氏咏华实业有限公司制 品 规 格 书PRODUCT SPECIFICATIONS规格编号SPEC NOH10U0259版本VERSIONA系列SERIESHDMI 母头(DIP)日期DATE2011.7.19制品名称DESCRIPTIONHDMI-AF-22页数PAGE 4
