《无尘车间物料管理（dust-free workshop material management ）》由会员分享，可在线阅读，更多相关《无尘车间物料管理（dust-free workshop material management ）（10页珍藏版）》请在金锄头文库上搜索。
1、无尘车间物料管理63701（Dust-free workshop material management 63701）The dust-free workshop material management of.Txt every girl was once an angel without tears, when you love the boy, he will cry one by one, then falls into the earth into a girl, so, the boy must not abandon the girl, because the girl is yo
2、u give up the whole heaven. Friends, dont cry, tonight I like Epiphyllum blooming in the most beautiful moments fade, dust-free workshop production management your tears can not restore my withered 1. standard1.1, the deployment of work by more than elongated cadres in accordance with the needs of t
3、he job to determine the location of personnel, any person affected by the post can not be picky about the behavior of the work(except in exceptional cases, but confirmed by the officer at the competent level)1.2. The operator must complete the work in accordance with the operation instruction or the
4、 instruction manual of the machine. The operation method change or special technical operation must be done by the competent personThe clerk will confirm the execution.1.3, operators must be self check (including raw materials inspection and component inspection) assembly line operation station, oth
5、er operators need to carry out the last station inspection,And requires all operators must be familiar with their previous station and next station job content1.4, operators must be completed according to the provisions of production, in order to ensure efficiency.1.5, when the operation is found ab
6、normal, must promptly report to elongated above cadres request processing.1.6, when the workers found their homework is not enough materials 1 hours in advance to report material or material handler or elongated issue, not allowed to materialPick up the material on the rack.2. clean room material ma
7、nagement regulations2.1, all materials must be clearly marked (including raw materials, combinations, finished products)2.2. All materials must be put in order according to regulations.2.3, material handler must periodically repaying the bad material (1 times, each batch according to the order confi
8、rmation)2.4, every time when the material material handler when Queliao must report to the main person in charge of production or elongated.2.5, or elongated material handler must be responsible for material import and make the account details.3. clean workshop production discipline3.1, all personne
9、l must be 5 minutes ahead of time to work3.2, all personnel must be required to wear clean clothes, hats, shoes, you can enter the dust-free workshop, and not in the dust-free workshop finishing dust-free clothing.3.3, the relevant personnel must be required to wear gloves, before entering dust-free
10、 workshop operation.3.4, the work time can not have chat phenomenon, still more dont allow quarrel phenomenon.3.5, dust-free workshop is not allowed to bring personal things unrelated to work.3.6, all personnel, half an hour before work and half an hours work is not allowed to go to the bathroom.3.7
11、, to Restroom personnel must use to change the label off card to leave, to Restroom time shall not exceed 10 minutes.3.8, all personnel to and from work must be placed in accordance with the provisions of their clothes and static clothing.3.9. All personnel must clean their jobs according to the reg
12、ulations before and after work.3.10, all personnel to and from work must be lined up according to the provisions of the dust-free workshop.4. dust-free workshop operating environment regulations4.1, dust test, every three months outside the commission test, and attached to test results to the manage
13、ment of the Department archives.4.2, dust-free workshop standard temperature: 21 degrees -25 degrees, humidity: 50%-70%, every day to have thermometer records.Four3, the operator will be 10 minutes before and after the work of their own station environment for cleaning (including overtime), by the c
14、ompetent staff review and confirm irregularly.1. purposeThis procedure aims to provide a standardized procedure for the protection of aseptic operations and asepsis room.2. scope of applicationBioassay Laboratory3. responsible personQC supervisor, student tester4. definitionsnothing5. safety precaut
15、ionsStrict aseptic operation to prevent microbial contamination; operators should turn off the UV light when they enter asepsis room.6. rules6.1. asepsis room should be equipped with aseptic operation room and buffer room. The cleanliness of aseptic operation should reach 10000 levels, the indoor te
16、mperature should be kept at 20-24 degrees, and the humidity should be kept at 45-60%. Ultra clean table should reach 100 level.6.2. asepsis room should be kept clean, no stacking of debris, in case of pollution.6.3. to prevent all sterilization equipment and medium pollution, polluters should stop using.
