《电阻炉设计基础数据》由会员分享，可在线阅读，更多相关《电阻炉设计基础数据（5页珍藏版）》请在金锄头文库上搜索。
1、 Page 1电熔炉设计基础数据Base data for the design of the electric melting furnace Page 2Heat generated per second：4.5 kJHighest electrical current：200 ATIG welding machine Page 310 s: The TIG welding machine can generate about 45 kJ quantity of electric arc heat in the period of 10 second and meantime the he
2、at generated can theoretically melt 100 g Fe at least when the melting heat of Fe is 15.508 kJ/mol. So the TIG welding machine is perfect for melting Fe metal at the help of electric arc, but can the TIG welding machine be used as the electrical source for the electric melting furnace ?Suppose:2 0.2
3、 m. The resistivity of Fe obtained from paper is 0.97 10 -7 .m and the resistance of Fe setted in the furnace at the laden volume is calculated as 19.4 10 -7 . As the resistance of Fe is very small, the heat generated by itself is calculated as 0.0776 J per sec at the highest current by the TIG weld
4、ing machine as the electrical source. Conclusion: The TIG welding machine can not be used as the electrical source for the electric melting furnace because the small electrical current. Analysis procedure Page 4Salting transformerThe salting transformer can generate high current value, as a result it can be as the electrical source for the electric melting furnace. Page 5Thank You
