PCB Text PCB Power Relay – G2R

《PCB Text PCB Power Relay – G2R》由会员分享，可在线阅读，更多相关《PCB Text PCB Power Relay – G2R（16页珍藏版）》请在金锄头文库上搜索。

1、117Text116TextSpecifications Coil RatingsRated voltage5 VDC6 VDC12 VDC24 VDC48 VDC100 VDCRated current (50/60Hz)106 mA88.2 mA43.6 mA21.8 mA11.5 mA5.3 mACoil resistance47 68 275 1,100 4,170 18,860 0.200.281.154.2713.8667.20.390.552.298.5527.7193.2Must operate voltage70% max. of rated voltageMust rele

2、ase voltage15% min. of rated voltageMax. voltage170% of rated voltage (at 23C)Power consumptionApprox. 0.53 WCoil inductance Armature OFF(H) (ref. value)Armature ONRated voltage12 VAC24 VAC100/(110) VAC120 VAC200/(220)VAC220 VAC230 VAC240 VAC93 mA46.5 mA11 mA9.3 mA5.5 mA5.1 mA4.7 mA4.7 mA75 mA37.5 m

3、A9/(10.6) mA7.5 mA4.5 (5.3) mA4.1 mA3.8 mA3.8 mACoil resistance65 260 4,600 6,500 20,200 25,000 26,85030,000 0.190.8113.342151.357.56265.50.391.5526.8442102117124131Must operate voltage80% max. of rated voltageMust release voltage30% min. of rated voltageMax. voltage140% of rated voltage (at 23C)Pow

4、er consumptionApprox. 0.9 VA at 60 Hz (approx. 0.7 VA at 60 Hz)Coil inductance Armature OFF(H) (ref. value)Armature ONRated Current50Hz60HzModel Number LegendG2R - VDC 123456789-1. Relay FunctionNone: Single-side stableK:Double-winding latching2. Number of Poles1:1 pole2:2 poles3. Contact FormNone:

5、PDTA: PST-NO4. Contact TypeNone: SingleZ:Bifurcated5. Enclosure RatingsNone: Flux protection4:Fully sealed6. TerminalsNone: Straight PCB T:Quick-connect (upper bracket mounting)7. ClassificationNone: General-purposeE:High-capacityH:High-sensitivity8. Safety StandardsNone: UL/CSA/EN/SEV/TVSKVD: UL/CS

6、A/EN/SEV/TV/SEMKO9. Rated Coil VoltageRefer to Coil RatingsPCB Power Relay G2RPCB Power Relay G2RPower RelaysRated coil voltageNote: 1. When ordering, add the rated coil voltage to the model number.Example: G2R-1A 12 VDC 2. Models with CTI250 material are also available.Contact your OMRON representa

7、tive for more details.Ordering InformationClassificationEnclosureRatingsCoilRatingsContact FormSPST-NOSPDTDPST-NODPDTPCB terminalGeneral-purposeFlux protectionAC/DCG2R-1AG2R-1G2R-2AG2R-2Fully sealedG2R-1A4G2R-14G2R-2A4G2R-24Bifurcated contactFlux protectionDCG2R-1AZG2R-1ZFully sealedG2R-1AZ4G2R-1Z4H

8、igh-capacityFlux protectionAC/DCG2R-1A-EG2R-1-EHigh-sensitivityFlux protectionDCG2R-1A-HG2R-1-HG2R-2A-HG2R-2-HDouble-winding latchingFlux protectionG2RK-1AG2RK-1G2RK-2AG2RK-2General-purposeUnsealedACG2R-1A-TG2R1-TDCQuick connect(upper bracketmounting)A Power Relay for a Variety ofPurposes with Vario

9、us Models ROHS compliant Conforms to EN 61810-1, UL508, CSA22.2,SEV, SEMKO. Meets EN60335-1 requirements for householdproducts. Clearance and creepage distance:8 mm/8 m. Models with CTI250 material available. High-sensitivity (360 mW) and high-capacity(16 A) types available. Double-winding latching

10、type available.Omron 08 Cat 1-302 5/10/07 15:39 Page 116117Text116TextSpecifications Coil RatingsRated voltage5 VDC6 VDC12 VDC24 VDC48 VDC100 VDCRated current (50/60Hz)106 mA88.2 mA43.6 mA21.8 mA11.5 mA5.3 mACoil resistance47 68 275 1,100 4,170 18,860 0.200.281.154.2713.8667.20.390.552.298.5527.7193

11、.2Must operate voltage70% max. of rated voltageMust release voltage15% min. of rated voltageMax. voltage170% of rated voltage (at 23C)Power consumptionApprox. 0.53 WCoil inductance Armature OFF(H) (ref. value)Armature ONRated voltage12 VAC24 VAC100/(110) VAC120 VAC200/(220)VAC220 VAC230 VAC240 VAC93

12、 mA46.5 mA11 mA9.3 mA5.5 mA5.1 mA4.7 mA4.7 mA75 mA37.5 mA9/(10.6) mA7.5 mA4.5 (5.3) mA4.1 mA3.8 mA3.8 mACoil resistance65 260 4,600 6,500 20,200 25,000 26,85030,000 0.190.8113.342151.357.56265.50.391.5526.8442102117124131Must operate voltage80% max. of rated voltageMust release voltage30% min. of ra

13、ted voltageMax. voltage140% of rated voltage (at 23C)Power consumptionApprox. 0.9 VA at 60 Hz (approx. 0.7 VA at 60 Hz)Coil inductance Armature OFF(H) (ref. value)Armature ONRated Current50Hz60HzModel Number LegendG2R - VDC 123456789-1. Relay FunctionNone: Single-side stableK:Double-winding latching

14、2. Number of Poles1:1 pole2:2 poles3. Contact FormNone: PDTA: PST-NO4. Contact TypeNone: SingleZ:Bifurcated5. Enclosure RatingsNone: Flux protection4:Fully sealed6. TerminalsNone: Straight PCB T:Quick-connect (upper bracket mounting)7. ClassificationNone: General-purposeE:High-capacityH:High-sensiti

15、vity8. Safety StandardsNone: UL/CSA/EN/SEV/TVSKVD: UL/CSA/EN/SEV/TV/SEMKO9. Rated Coil VoltageRefer to Coil RatingsPCB Power Relay G2RPCB Power Relay G2RPower RelaysRated coil voltageNote: 1. When ordering, add the rated coil voltage to the model number.Example: G2R-1A 12 VDC 2. Models with CTI250 m

16、aterial are also available.Contact your OMRON representative for more details.Ordering InformationClassificationEnclosureRatingsCoilRatingsContact FormSPST-NOSPDTDPST-NODPDTPCB terminalGeneral-purposeFlux protectionAC/DCG2R-1AG2R-1G2R-2AG2R-2Fully sealedG2R-1A4G2R-14G2R-2A4G2R-24Bifurcated contactFl

17、ux protectionDCG2R-1AZG2R-1ZFully sealedG2R-1AZ4G2R-1Z4High-capacityFlux protectionAC/DCG2R-1A-EG2R-1-EHigh-sensitivityFlux protectionDCG2R-1A-HG2R-1-HG2R-2A-HG2R-2-HDouble-winding latchingFlux protectionG2RK-1AG2RK-1G2RK-2AG2RK-2General-purposeUnsealedACG2R-1A-TG2R1-TDCQuick connect(upper bracketmo

18、unting)A Power Relay for a Variety ofPurposes with Various Models ROHS compliant Conforms to EN 61810-1, UL508, CSA22.2,SEV, SEMKO. Meets EN60335-1 requirements for householdproducts. Clearance and creepage distance:8 mm/8 m. Models with CTI250 material available. High-sensitivity (360 mW) and high-

19、capacity(16 A) types available. Double-winding latching type available.Omron 08 Cat 1-302 5/10/07 15:39 Page 116119Text118TextItemBifurcated contactsHigh-sensitivityNumber of poles1 pole1 pole2 polesLoadResistive loadInductive loadResistive loadInductive loadResistive loadInductive load(cos = 1)(cos

20、 = 0.4;(cos = 1)(cos = 0.4;(cos = 1)(cos = 0.4; L/R = 7 ms)L/R = 7 ms)L/R = 7 ms)Rated Load5 A at 250 VAC;2 A at 250 VAC;5 A at 250 VAC;2 A at 250 VAC;3 A at 250 VAC;1 A at 250 VAC; 5 A at 30 VDC3 A at 30 VDC5 A at 30 VDC3 A at 30 VDC3 A at 30 VDC1.5 A at 30 VDCRated carry current5 A5 A3 AMax. switc

21、hing voltage 380 VAC, 125 VDC380 VAC, 125 VDC380 VAC, 125 VDCMax. switching current 5 A5 A3 AMax. switching power1,250 VA,500 VA,1,250 VA,500 VA,750 VA,250 VA,150 W90 W150 W90 W90 W45 WFailure rate1 mA at 5 VDC100 mA at 5 VDC10 mA at 5 VDC(reference value)Note: P level: 60= 0.1 x 10-6/operation.PCB/

22、Flux Protection RelaysItemGeneral-purpose, quick-connect terminalHigh-capacityNumber of poles1 pole2 poles1 poleLoadResistive loadInductive loadResistive loadInductive loadResistive loadInductive load(cos = 1)(cos = 0.4;(cos = 1)(cos = 0.4;(cos = 1)(cos = 0.4; L/R = 7 ms)L/R = 7 ms)L/R = 7 ms)Rated

23、Load10 A at 250 VAC;7.5 A at 250 5 A at 250 VAC;2 A at 250 VAC;16 A at 250 VAC; 8 A at 250 VAC;10 A at 30 VDCVAC;5 A at 30 VDC3 A at 30 VDC16 A at 30 VDC8 A at 30 VDC5 A at 30 VDCContact materialAgSnIn Rated carry current10 A5 A16 AMax. switching voltage 380 VAC, 125 VDC380 VAC, 125 VDC380 VAC, 125

24、VDCMax. switching current 10 A5 A16 AMax. switching power2,500 VA,1,875 VA, 1,250 VA,500 VA,4,000 VA,2,000 VA,300 W150 W150 W90 W480 W240 WFailure rate100 mA at 5 VDC10 mA at 5 VDC100 mA at 5 VDC(reference value)Note: 1. P level: 60= 0.1 x 10-6/operation. Contact RatingsPCB/Flux Protection, Plug-in,

25、 Quick-connect Terminal RelaysPCB Power Relay G2RPCB Power Relay G2RPower RelaysHigh-sensitivity RelaysRated voltage5 VDC6 VDC12 VDC24 VDC48 VDCRated current (50/60Hz)71.4 mA60 mA30 mA15 mA7.5 mA(see Note. 1)Coil resistance (see Note. 1) 70 100 400 1,600 6,400 0.370.532.147.8031.200.751.074.2715.606

26、2.40Must operate voltage70% max. of rated voltageMust release voltage15% min. of rated voltageMax. voltage170% of rated voltage (at 23C)Power consumptionApprox. 0.36 WNote: 1. The rated current and coil resistance are measured at a coil temperature of 23C with a tolerance of +15%/20%(AC ratedcurrent

27、) or 10% (DC coil resistance)2. Operating characteristics are measured at a coil temperature of 23C3. Depending on the type of relay, some relays do not have coil specifications. Contact your Omron representative for moredetails.Coil inductance Armature OFF(H) (ref. value)Armature ONDouble-winding L

28、atching RelaysRated voltage5 VDC6 VDC12 VDC24 VDCRated current (see note 1.)167 mA138 mA70.6 mA34.6 mACoil resistance (see note 1.)30 43.5 170 694 0.0730.1040.421.740.1460.2080.833.43Rated current119 mA100 mA50 mA25 mACoil resistance42 60 240 960 0.0030.0050.0180.0790.0060.0090.0360.148Must set volt

29、age70% max. of rated voltageMust reset voltage70% max. of rated voltageMax. voltage140% of rated voltage (at 23C)Power consumptionSet coil: Approx. 850 mW; Reset coil: Approx. 600 mWNote: 1. The rated current and coil resistance are measured at a coil temperature of 23C with a tolerance of 10%.2. Op

30、erating characteristics are measured at a coil temperature of 23C.Coil inductanceArmature OFF(H) (ref. value)Armature ONCoil inductanceArmature OFF(H) (ref. value)Armature ONSet CoilReset CoilOmron 08 Cat 1-302 5/10/07 15:39 Page 118119Text118TextItemBifurcated contactsHigh-sensitivityNumber of pole

31、s1 pole1 pole2 polesLoadResistive loadInductive loadResistive loadInductive loadResistive loadInductive load(cos = 1)(cos = 0.4;(cos = 1)(cos = 0.4;(cos = 1)(cos = 0.4; L/R = 7 ms)L/R = 7 ms)L/R = 7 ms)Rated Load5 A at 250 VAC;2 A at 250 VAC;5 A at 250 VAC;2 A at 250 VAC;3 A at 250 VAC;1 A at 250 VA

32、C; 5 A at 30 VDC3 A at 30 VDC5 A at 30 VDC3 A at 30 VDC3 A at 30 VDC1.5 A at 30 VDCRated carry current5 A5 A3 AMax. switching voltage 380 VAC, 125 VDC380 VAC, 125 VDC380 VAC, 125 VDCMax. switching current 5 A5 A3 AMax. switching power1,250 VA,500 VA,1,250 VA,500 VA,750 VA,250 VA,150 W90 W150 W90 W90

33、 W45 WFailure rate1 mA at 5 VDC100 mA at 5 VDC10 mA at 5 VDC(reference value)Note: P level: 60= 0.1 x 10-6/operation.PCB/Flux Protection RelaysItemGeneral-purpose, quick-connect terminalHigh-capacityNumber of poles1 pole2 poles1 poleLoadResistive loadInductive loadResistive loadInductive loadResisti

34、ve loadInductive load(cos = 1)(cos = 0.4;(cos = 1)(cos = 0.4;(cos = 1)(cos = 0.4; L/R = 7 ms)L/R = 7 ms)L/R = 7 ms)Rated Load10 A at 250 VAC;7.5 A at 250 5 A at 250 VAC;2 A at 250 VAC;16 A at 250 VAC; 8 A at 250 VAC;10 A at 30 VDCVAC;5 A at 30 VDC3 A at 30 VDC16 A at 30 VDC8 A at 30 VDC5 A at 30 VDC

35、Contact materialAgSnIn Rated carry current10 A5 A16 AMax. switching voltage 380 VAC, 125 VDC380 VAC, 125 VDC380 VAC, 125 VDCMax. switching current 10 A5 A16 AMax. switching power2,500 VA,1,875 VA, 1,250 VA,500 VA,4,000 VA,2,000 VA,300 W150 W150 W90 W480 W240 WFailure rate100 mA at 5 VDC10 mA at 5 VD

36、C100 mA at 5 VDC(reference value)Note: 1. P level: 60= 0.1 x 10-6/operation. Contact RatingsPCB/Flux Protection, Plug-in, Quick-connect Terminal RelaysPCB Power Relay G2RPCB Power Relay G2RPower RelaysHigh-sensitivity RelaysRated voltage5 VDC6 VDC12 VDC24 VDC48 VDCRated current (50/60Hz)71.4 mA60 mA

37、30 mA15 mA7.5 mA(see Note. 1)Coil resistance (see Note. 1) 70 100 400 1,600 6,400 0.370.532.147.8031.200.751.074.2715.6062.40Must operate voltage70% max. of rated voltageMust release voltage15% min. of rated voltageMax. voltage170% of rated voltage (at 23C)Power consumptionApprox. 0.36 WNote: 1. The

38、 rated current and coil resistance are measured at a coil temperature of 23C with a tolerance of +15%/20%(AC ratedcurrent) or 10% (DC coil resistance)2. Operating characteristics are measured at a coil temperature of 23C3. Depending on the type of relay, some relays do not have coil specifications.

39、Contact your Omron representative for moredetails.Coil inductance Armature OFF(H) (ref. value)Armature ONDouble-winding Latching RelaysRated voltage5 VDC6 VDC12 VDC24 VDCRated current (see note 1.)167 mA138 mA70.6 mA34.6 mACoil resistance (see note 1.)30 43.5 170 694 0.0730.1040.421.740.1460.2080.83

40、3.43Rated current119 mA100 mA50 mA25 mACoil resistance42 60 240 960 0.0030.0050.0180.0790.0060.0090.0360.148Must set voltage70% max. of rated voltageMust reset voltage70% max. of rated voltageMax. voltage140% of rated voltage (at 23C)Power consumptionSet coil: Approx. 850 mW; Reset coil: Approx. 600

41、 mWNote: 1. The rated current and coil resistance are measured at a coil temperature of 23C with a tolerance of 10%.2. Operating characteristics are measured at a coil temperature of 23C.Coil inductanceArmature OFF(H) (ref. value)Armature ONCoil inductanceArmature OFF(H) (ref. value)Armature ONSet C

42、oilReset CoilOmron 08 Cat 1-302 5/10/07 15:39 Page 118121Text120Text CharacteristicsStandard RelaysItem1 Pole2 PolesContact resistance30 m max. (high-capacity type: 100 m max.)50 m max.Operate (set) time15 ms maxRelease (reset) timeAC: 10 ms max.; DC: 5 ms max. (w/built-in diode: 20 ms max.) Max. op

43、erating frequencyMechanical: 18,000 operations/hrElectrical: 1,800 operations/hr (under rated load)Insulation resistance1,000 M min. (at 500 VDC)Impulse withstand voltage10KV 1*40secCreepage (Typ)10.0 mmClearance (Typ)9.3 mmTracking Resistance (CTI)175 VDielectric strength5,000 VAC, 50/60 Hz for 1 m

44、in5,000 VAC, 50/60 Hz for 1 minbetween coil and contacts*;between coil and contacts*;1,000 VAC, 50/60 Hz for 1 min3,000 VAC, 50/60 Hz for 1 minbetween contacts of same polaritybetween contacts of different polarity1,000 VAC, 50/60 Hz for 1 minbetween contacts of same polarityVibration resistanceDest

45、ruction: 10 to 55 to 10 Hz, 0.75mm single amplitude (1.5mm double amplitude)Malfunction: 10 to 55 to 10 Hz, 0.75mm single amplitude (1.5mm double amplitude)Shock resistanceDestruction: 1,000 m/s2Malfunction: 200 m/s2when energized; 100 m/s2when not energizedEnduranceMechanical: AC coil: 10,000,000 o

46、perations min.; DC coil: 20,000,000 operations min. (at 18,000 operations/hr)Electrical:100,000 operations min. (at 1,800 operations/hr under rated load)Ambient temperatureOperating: -40C to 70C (with no icing)Ambient humidityOperating: 5% to 85%WeightApprox. 17 gNote: Values in the above table are

47、initial values.PCB Power Relay G2RInsulationDistancePCB Power Relay G2RPower RelaysItemGeneral-purpose (single contact)Bifurcated contactNumber of poles1 pole2 poles1 poleLoadResistive loadInductive loadResistive loadInductive loadResistive loadInductive load(cos = 1)(cos = 0.4;(cos = 1)(cos = 0.4;(

48、cos = 1)(cos = 0.4; L/R = 7 ms)L/R = 7 ms)L/R = 7 ms)Rated Load8 A at 250 VAC;6 A at 250 VAC;4 A at 250 VAC;1.5 A at 250 VAC; 5 A at 250 VAC;2 A at 250 VAC;8 A at 30 VDC4 A at 30 VDC4 A at 30 VDC2.5 A at 30 VDC5 A at 30 VDC3 A at 30 VDCRated carry current8 A4 A5 AMax. switching voltage 380 VAC, 125

49、VDC380 VAC, 125 VDC380 VAC, 125 VDCMax. switching current 8 A4 A5 AMax. switching power2,000 VA,1,500 VA, 1,000 VA,375 VA,1,250 VA,500 VA,240 W120 W120 W75 W150 W90 WFailure rate100 mA at 5 VDC10 mA at 5 VDC1 mA at 5 VDC(reference value)Note: P level: 60= 0.1 x 10-6/operation.PCB/Fully Sealed Relays

50、Number of poles1 pole2 polesLoadResistive loadInductive loadResistive loadInductive load(cos = 1)(cos = 0.4;(cos = 1)(cos = 0.4; L/R = 7 ms)L/R = 7 ms)Rated Load5 A at 250 VAC;3.5 A at 250 VAC;3 A at 250 VAC;1.5 A at 250 VAC;5 A at 30 VDC2.5 A at 30 VDC3 A at 30 VDC2 A at 30 VDCRated carry current5

51、A3 AMax. switching voltage 380 VAC, 125 VDC380 VAC, 125 VDCMax. switching current 5 A3 AMax. switching power1,250 VA, 150 W875 VA, 75 W750 VA, 90 W375 VA, 60 WFailure rate100 mA at 5 VDC10 mA at 5 VDC(reference value)Note: P level: 60= 0.1 x 10-6/operation.Latching RelaysOmron 08 Cat 1-302 5/10/07 1

52、5:39 Page 120121Text120Text CharacteristicsStandard RelaysItem1 Pole2 PolesContact resistance30 m max. (high-capacity type: 100 m max.)50 m max.Operate (set) time15 ms maxRelease (reset) timeAC: 10 ms max.; DC: 5 ms max. (w/built-in diode: 20 ms max.) Max. operating frequencyMechanical: 18,000 opera

53、tions/hrElectrical: 1,800 operations/hr (under rated load)Insulation resistance1,000 M min. (at 500 VDC)Impulse withstand voltage10KV 1*40secCreepage (Typ)10.0 mmClearance (Typ)9.3 mmTracking Resistance (CTI)175 VDielectric strength5,000 VAC, 50/60 Hz for 1 min5,000 VAC, 50/60 Hz for 1 minbetween co

54、il and contacts*;between coil and contacts*;1,000 VAC, 50/60 Hz for 1 min3,000 VAC, 50/60 Hz for 1 minbetween contacts of same polaritybetween contacts of different polarity1,000 VAC, 50/60 Hz for 1 minbetween contacts of same polarityVibration resistanceDestruction: 10 to 55 to 10 Hz, 0.75mm single

55、 amplitude (1.5mm double amplitude)Malfunction: 10 to 55 to 10 Hz, 0.75mm single amplitude (1.5mm double amplitude)Shock resistanceDestruction: 1,000 m/s2Malfunction: 200 m/s2when energized; 100 m/s2when not energizedEnduranceMechanical: AC coil: 10,000,000 operations min.; DC coil: 20,000,000 opera

56、tions min. (at 18,000 operations/hr)Electrical:100,000 operations min. (at 1,800 operations/hr under rated load)Ambient temperatureOperating: -40C to 70C (with no icing)Ambient humidityOperating: 5% to 85%WeightApprox. 17 gNote: Values in the above table are initial values.PCB Power Relay G2RInsulat

57、ionDistancePCB Power Relay G2RPower RelaysItemGeneral-purpose (single contact)Bifurcated contactNumber of poles1 pole2 poles1 poleLoadResistive loadInductive loadResistive loadInductive loadResistive loadInductive load(cos = 1)(cos = 0.4;(cos = 1)(cos = 0.4;(cos = 1)(cos = 0.4; L/R = 7 ms)L/R = 7 ms

58、)L/R = 7 ms)Rated Load8 A at 250 VAC;6 A at 250 VAC;4 A at 250 VAC;1.5 A at 250 VAC; 5 A at 250 VAC;2 A at 250 VAC;8 A at 30 VDC4 A at 30 VDC4 A at 30 VDC2.5 A at 30 VDC5 A at 30 VDC3 A at 30 VDCRated carry current8 A4 A5 AMax. switching voltage 380 VAC, 125 VDC380 VAC, 125 VDC380 VAC, 125 VDCMax. s

59、witching current 8 A4 A5 AMax. switching power2,000 VA,1,500 VA, 1,000 VA,375 VA,1,250 VA,500 VA,240 W120 W120 W75 W150 W90 WFailure rate100 mA at 5 VDC10 mA at 5 VDC1 mA at 5 VDC(reference value)Note: P level: 60= 0.1 x 10-6/operation.PCB/Fully Sealed RelaysNumber of poles1 pole2 polesLoadResistive

60、 loadInductive loadResistive loadInductive load(cos = 1)(cos = 0.4;(cos = 1)(cos = 0.4; L/R = 7 ms)L/R = 7 ms)Rated Load5 A at 250 VAC;3.5 A at 250 VAC;3 A at 250 VAC;1.5 A at 250 VAC;5 A at 30 VDC2.5 A at 30 VDC3 A at 30 VDC2 A at 30 VDCRated carry current5 A3 AMax. switching voltage 380 VAC, 125 V

61、DC380 VAC, 125 VDCMax. switching current 5 A3 AMax. switching power1,250 VA, 150 W875 VA, 75 W750 VA, 90 W375 VA, 60 WFailure rate100 mA at 5 VDC10 mA at 5 VDC(reference value)Note: P level: 60= 0.1 x 10-6/operation.Latching RelaysOmron 08 Cat 1-302 5/10/07 15:39 Page 120123Text122TextPCB Power Rela

62、y G2RModelContact formCoil ratingsContact ratingsG2R-1SPDT3 to 110 VDC10 A, 30 VDC (resistive)G2R-143 to 240 VAC10 A, 250 VAC (general use)G2R-1-HTV-3 (NO contact only)G2R-1-SG2R-1-TG2R-1ASPST-NOG2R-1A4G2R-1A-HG2R-1A-SG2R-1A-TG2R-1-ESPDTG2R-1A-ESPST-NOG2R-2DPDT5 A, 30 VDC (resistive)G2R-245 A, 250 V

63、AC (general use)G2R-2-HTV-3 (NO contact only)G2R-2-SG2R-2ADPST-NOG2R-2A4G2R-2A-HG2R-2A-SG2R-1A-ASISPST-NO10 A, 30 VDC (resistive)10 A, 250 VAC (general use)TV-5/TV-8 (NO contact only), (For UL)TV-8 (NO contact only); 1/4 hp, 125 VAC (For CSA) Approved StandardsUL 508 (File No. E41643), CSA 22.2 No.1

64、4 (File No. LR31928)16 A, 30 VDC (resistive, NO contact only)16 A, 250 VAC (general use, NO contact only)TV-3 (NO contact only); (1/3 hp, 120 VAC For UL)PCB Power Relay G2RDouble-winding Latching RelaysItem1 Pole2 PolesContact resistance30 m max.50 m max.Set time20 ms maxReset time20 ms max. Min. se

65、t/reset signal width30 ms max.Max. operating frequencyMechanical: 18,000 operations/hrElectrical: 1,800 operations/hr (under rated load)Insulation resistance1,000 M min. (at 500 VDC)Dielectric strength5,000 VAC, 50/60 Hz for 1 min5,000 VAC, 50/60 Hz for 1 minbetween coil and contacts*;between coil a

66、nd contacts*;1,000 VAC, 50/60 Hz for 1 min3,000 VAC, 50/60 Hz for 1 minbetween contacts of same pole;between contacts of different poles1,000 VAC, 50/60 Hz for 1 min1,000 VAC, 50/60 Hz for 1 minbetween set and reset coilbetween contacts of same pole1,000 VAC, 50/60 Hz for 1 minbetween set and reset

67、coilVibration resistanceDestruction: 10 to 55 to 10 Hz, 0.75mm single amplitude (1.5mm double amplitude)Malfunction: 10 to 55 to 10 Hz, 0.75mm single amplitude (1.5mm double amplitude)Shock resistanceDestruction: 1,000 m/s2(approx. 100G)Malfunction: Set: 500 m/s2(approx. 50G); 200 m/s2(approx. 20G)R

68、eset: 100 m/s2(approx. 10G)EnduranceMechanical: 10,000,000 operations min (at 18,000 operations/hr)Electrical: 100,000 operations min. (at 1,800 operations/hr under rated load)Ambient temperatureOperating: -40C to 70C (with no icing)Ambient humidityOperating: 5% to 85%WeightApprox. 17 g (Quick-conne

69、ct type: approx. 20g)Note: Values in the above table are the initial values.Power RelaysOmron 08 Cat 1-302 5/10/07 15:39 Page 122123Text122TextPCB Power Relay G2RModelContact formCoil ratingsContact ratingsG2R-1SPDT3 to 110 VDC10 A, 30 VDC (resistive)G2R-143 to 240 VAC10 A, 250 VAC (general use)G2R-

70、1-HTV-3 (NO contact only)G2R-1-SG2R-1-TG2R-1ASPST-NOG2R-1A4G2R-1A-HG2R-1A-SG2R-1A-TG2R-1-ESPDTG2R-1A-ESPST-NOG2R-2DPDT5 A, 30 VDC (resistive)G2R-245 A, 250 VAC (general use)G2R-2-HTV-3 (NO contact only)G2R-2-SG2R-2ADPST-NOG2R-2A4G2R-2A-HG2R-2A-SG2R-1A-ASISPST-NO10 A, 30 VDC (resistive)10 A, 250 VAC

71、(general use)TV-5/TV-8 (NO contact only), (For UL)TV-8 (NO contact only); 1/4 hp, 125 VAC (For CSA) Approved StandardsUL 508 (File No. E41643), CSA 22.2 No.14 (File No. LR31928)16 A, 30 VDC (resistive, NO contact only)16 A, 250 VAC (general use, NO contact only)TV-3 (NO contact only); (1/3 hp, 120 V

72、AC For UL)PCB Power Relay G2RDouble-winding Latching RelaysItem1 Pole2 PolesContact resistance30 m max.50 m max.Set time20 ms maxReset time20 ms max. Min. set/reset signal width30 ms max.Max. operating frequencyMechanical: 18,000 operations/hrElectrical: 1,800 operations/hr (under rated load)Insulat

73、ion resistance1,000 M min. (at 500 VDC)Dielectric strength5,000 VAC, 50/60 Hz for 1 min5,000 VAC, 50/60 Hz for 1 minbetween coil and contacts*;between coil and contacts*;1,000 VAC, 50/60 Hz for 1 min3,000 VAC, 50/60 Hz for 1 minbetween contacts of same pole;between contacts of different poles1,000 V

74、AC, 50/60 Hz for 1 min1,000 VAC, 50/60 Hz for 1 minbetween set and reset coilbetween contacts of same pole1,000 VAC, 50/60 Hz for 1 minbetween set and reset coilVibration resistanceDestruction: 10 to 55 to 10 Hz, 0.75mm single amplitude (1.5mm double amplitude)Malfunction: 10 to 55 to 10 Hz, 0.75mm

75、single amplitude (1.5mm double amplitude)Shock resistanceDestruction: 1,000 m/s2(approx. 100G)Malfunction: Set: 500 m/s2(approx. 50G); 200 m/s2(approx. 20G)Reset: 100 m/s2(approx. 10G)EnduranceMechanical: 10,000,000 operations min (at 18,000 operations/hr)Electrical: 100,000 operations min. (at 1,80

76、0 operations/hr under rated load)Ambient temperatureOperating: -40C to 70C (with no icing)Ambient humidityOperating: 5% to 85%WeightApprox. 17 g (Quick-connect type: approx. 20g)Note: Values in the above table are the initial values.Power RelaysOmron 08 Cat 1-302 5/10/07 15:39 Page 122125Text124Text

77、PCB Power Relay G2RFlux Protection/Plug-in RelaysG2R-1, G2R-1A, G2R-1-T, G2R-1A-T Switching current (A)G2R-1-E, G2R-1A-EG2R-1Z, G2R-1AZSwitching voltage (V)Switching voltage (V)Switching voltage (V)G2R-1-H, G2R-1A-H, G2R-2, G2R-2A G2R-2-H, G2R-2A-HSwitching voltage (V)Switching voltage (V)G2RK-1A, G

78、2RK-1G2RK-2A, G2RK-2Switching voltage (V)Switching voltage (V)Maximum Switching PowerACresistive loadDCresistive loadAC inductive load DC inductive load (L/R = 7 ms)ACresistive loadDC inductive load (L/R = 7 ms)DCresistive loadAC inductive load ACresistive loadAC inductive load DC inductive load (L/

79、R = 7 ms)DCresistive loadACresistive loadDCresistive loadDC inductive load (L/R = 7 ms)DC inductive load (L/R = 7 ms)DCresistive loadACresistive loadACresistive loadACresistive loadDCresistive loadDCresistive loadDC inductive load (L/R = 7 ms)DC inductive load (L/R = 7 ms)AC inductive load AC induct

80、ive load AC inductive load AC inductive load Switching current (A)Switching current (A)Switching current (A)Switching current (A)Switching current (A)Switching current (A)Engineering DataPCB Power Relay G2RContact formCoil ratingsContact ratings1 pole3 to 110 VDC16 A, 250 VAC1 (AgSnIn contact)3 to 2

81、40 VAC16 A, 30 VDC1 (AgSnIn contact)10 A, 250 VAC15 A, 250 VAC310 A, 30 VDC12 poles5 A, 250 VAC12 A, 380 VAC15 A, 30 VDC1SEVContact formCoil ratingsContact ratings1 pole5, 6, 9, 12, 18, 24, 48, 60, 100, 110 VDC10 A, 250 VAC (cos = 1.0)12, 18, 24, 48, 50, 100/(110), 110, 120,10 A, 30 VDC (0 ms)200/(2

82、20), 220, 230, 240 VAC16 A, 250 VAC (cos = 1.0)2 poles5, 6, 9, 12, 18, 24, 48, 60, 100, 110 VDC5 A, 250 VAC (cos =1.0)12, 18, 24, 48, 50, 100/(110), 110, 120,5 A, 30 VDC (0 ms)200/(220), 220, 230, 240 VACEN 61810-1 (VDE)Contact formCoil ratingsContact ratings1 pole3 to 110 VDC10/80 A, 250 VAC3 to 24

83、0 VAC3/100 A, 250 VAC16/128 A, 250 VAC (AgSnIn contact)2 poles5/40 A, 250 VACSEMKOContact formCoil ratingsContact ratings1 pole10 A, 250 VAC (cos = 1.0)10 A, 30 VDC (0 ms)16 A, 250 VAC (cos = 1.0)(AgSnIn contact)2 poles8 A, 250 VAC (cos = 0.4)5 A, 250 VAC (cos =1.0)5 A, 30 VDC (0 ms)2.5 A, 250 VAC (

84、cos = 0.4) TV (EN61810-1)3 to 110 VDC, 6 VAC to 240 VAC(for Standard coil)3 to 48 VDC (for K, U coil)3 to 70 VDC (for H coil)Power RelayssContact ratings10 A, 30 VDC (resistive)10 A, 250 VAC (general use)TV-3 (NO contact only)5 A, 30 VDC (resistive)5 A, 250 VAC (general use)TV-3 (NO contact only)10

85、A, 30 VDC (resistive)10 A, 250 VAC (general use)TV-8 (NO contact only); 1/4 hp, 125 VAC16 A, 30 VDC (resistive, NO contact only)16 A, 250 VAC (general use, NO contact only)TV-3 (NO contact only)Omron 08 Cat 1-302 5/10/07 15:39 Page 124125Text124TextPCB Power Relay G2RFlux Protection/Plug-in RelaysG2

86、R-1, G2R-1A, G2R-1-T, G2R-1A-T Switching current (A)G2R-1-E, G2R-1A-EG2R-1Z, G2R-1AZSwitching voltage (V)Switching voltage (V)Switching voltage (V)G2R-1-H, G2R-1A-H, G2R-2, G2R-2A G2R-2-H, G2R-2A-HSwitching voltage (V)Switching voltage (V)G2RK-1A, G2RK-1G2RK-2A, G2RK-2Switching voltage (V)Switching

87、voltage (V)Maximum Switching PowerACresistive loadDCresistive loadAC inductive load DC inductive load (L/R = 7 ms)ACresistive loadDC inductive load (L/R = 7 ms)DCresistive loadAC inductive load ACresistive loadAC inductive load DC inductive load (L/R = 7 ms)DCresistive loadACresistive loadDCresistiv

88、e loadDC inductive load (L/R = 7 ms)DC inductive load (L/R = 7 ms)DCresistive loadACresistive loadACresistive loadACresistive loadDCresistive loadDCresistive loadDC inductive load (L/R = 7 ms)DC inductive load (L/R = 7 ms)AC inductive load AC inductive load AC inductive load AC inductive load Switch

89、ing current (A)Switching current (A)Switching current (A)Switching current (A)Switching current (A)Switching current (A)Engineering DataPCB Power Relay G2RContact formCoil ratingsContact ratings1 pole3 to 110 VDC16 A, 250 VAC1 (AgSnIn contact)3 to 240 VAC16 A, 30 VDC1 (AgSnIn contact)10 A, 250 VAC15

90、 A, 250 VAC310 A, 30 VDC12 poles5 A, 250 VAC12 A, 380 VAC15 A, 30 VDC1SEVContact formCoil ratingsContact ratings1 pole5, 6, 9, 12, 18, 24, 48, 60, 100, 110 VDC10 A, 250 VAC (cos = 1.0)12, 18, 24, 48, 50, 100/(110), 110, 120,10 A, 30 VDC (0 ms)200/(220), 220, 230, 240 VAC16 A, 250 VAC (cos = 1.0)2 po

91、les5, 6, 9, 12, 18, 24, 48, 60, 100, 110 VDC5 A, 250 VAC (cos =1.0)12, 18, 24, 48, 50, 100/(110), 110, 120,5 A, 30 VDC (0 ms)200/(220), 220, 230, 240 VACEN 61810-1 (VDE)Contact formCoil ratingsContact ratings1 pole3 to 110 VDC10/80 A, 250 VAC3 to 240 VAC3/100 A, 250 VAC16/128 A, 250 VAC (AgSnIn cont

92、act)2 poles5/40 A, 250 VACSEMKOContact formCoil ratingsContact ratings1 pole10 A, 250 VAC (cos = 1.0)10 A, 30 VDC (0 ms)16 A, 250 VAC (cos = 1.0)(AgSnIn contact)2 poles8 A, 250 VAC (cos = 0.4)5 A, 250 VAC (cos =1.0)5 A, 30 VDC (0 ms)2.5 A, 250 VAC (cos = 0.4) TV (EN61810-1)3 to 110 VDC, 6 VAC to 240

93、 VAC(for Standard coil)3 to 48 VDC (for K, U coil)3 to 70 VDC (for H coil)Power RelayssContact ratings10 A, 30 VDC (resistive)10 A, 250 VAC (general use)TV-3 (NO contact only)5 A, 30 VDC (resistive)5 A, 250 VAC (general use)TV-3 (NO contact only)10 A, 30 VDC (resistive)10 A, 250 VAC (general use)TV-

94、8 (NO contact only); 1/4 hp, 125 VAC16 A, 30 VDC (resistive, NO contact only)16 A, 250 VAC (general use, NO contact only)TV-3 (NO contact only)Omron 08 Cat 1-302 5/10/07 15:39 Page 124127Text126TextPCB Power Relay G2RG2RK-1A, G2RK-1G2RK-2A, G2RK-2Endurance (x10 operations)3Switching current (A)Switc

95、hing current (A)Fully sealed RelaysG2R-14, G2R-1A4G2R-24, G2R-2A4G2R-1Z4, G2R-1AZ4Switching current (A)Switching current (A)Switching current (A)30-VDC inductive load (L/R = 7ms)250-VAC/30-VDCresistive load250-VAC inductive load (cos = 0.4)250-VAC/30-VDCresistive load30-VDC inductive load (L/R = 7 m

96、s)250-VAC inductive load (cos = 0.4)250-VAC/30-VDCresistive load250-VAC/30-VDCresistive load250-VAC/30-VDCresistive load250-VAC inductive load (cos = 0.4)250-VAC inductive load (cos = 0.4)250-VAC inductive load (cos = 0.4)30-VDC inductive load (L/R = 7ms)30-VDC inductive load (L/R = 7 ms)30-VDC indu

97、ctive load (L/R = 7 ms)5,0001,000500 100 50Endurance (x10 operations)3Endurance (x10 operations)3Endurance (x10 operations)3Endurance (x10 operations)310,0005,0001,000500 100505,0001,000500 100 505,0001,000500 100 505,0001,000500 100 50Ambient temperature (C)Maximum coil voltage (%)Ambient Temperatu

98、re vs Maximum Coil VoltageDC coilAC coilNote: The maximum coil voltage refers to the maxi-mum value in a varying range of operating power voltage, not a continuous voltage.Engineering Data (cont.)PCB Power Relay G2RFlux Protection/Plug-in RelaysG2R-1, G2R-1A, G2R-1-T, G2R-1A-T Endurance (x10 operati

99、ons)3G2R-1-E, G2R-1A-EG2R-1Z, G2R-1AZSwitching current (A)Switching current (A)Switching current (A)G2R-1-H, G2R-1A-H, G2R-2 G2R-2AG2R-2-H, G2R-2A-HSwitching current (A)Switching current (A)Endurance250-VAC/30-VDCresistive load250-VAC inductive load (cos = 0.4)30-VDC inductive load (L/R = 7ms)250-VA

100、C/30-VDCresistive load250-VAC (cos = 0.4)/30-VDC (L/R = 7 ms) inductive load30-VDC inductive load (L/R = 7 ms)250-VAC/30-VDC resistive load250-VAC inductive load (cos = 0.4)30-VDC inductive load (L/R = 7 ms)30-VDC inductive load (L/R = 7 ms)250-VAC/30-VDCresistive load250-VAC/30-VDCresistive load250

101、-VAC inductive load (cos = 0.4)250-VAC inductive load (cos = 0.4)5,0001,000 500 100 50Endurance (x10 operations)3Endurance (x10 operations)3Endurance (x10 operations)3Endurance (x10 operations)35,0001,000 500 100 505,0001,000 500 100 5010,0005,0003,000 1,000 500 300 10010,0005,0003,000 1,000500 300

102、100 5030G2R-13-S, G2R-1A3-SFully Sealed RelaysG2R-14, G2R-1A4Switching voltage (V)Switching voltage (V)Switching voltage (V)ACresistive loadAC inductive load (cos = 0.4)DC resistive loadDC inductive load (L/R = 7 ms)ACresistive loadDC inductive load (L/R = 7 ms)DCresistive loadACresistive loadDC ind

103、uctive load (L/R = 7 ms)DCresistive loadAC inductive load (cos = 0.4)AC inductive load (cos = 0.4)Switching current (A)Switching current (A)Switching current (A)G2R-24, G2R-2A4G2R-1Z4, G2R-1AZ4Power RelaysOmron 08 Cat 1-302 5/10/07 15:39 Page 126127Text126TextPCB Power Relay G2RG2RK-1A, G2RK-1G2RK-2

104、A, G2RK-2Endurance (x10 operations)3Switching current (A)Switching current (A)Fully sealed RelaysG2R-14, G2R-1A4G2R-24, G2R-2A4G2R-1Z4, G2R-1AZ4Switching current (A)Switching current (A)Switching current (A)30-VDC inductive load (L/R = 7ms)250-VAC/30-VDCresistive load250-VAC inductive load (cos = 0.

105、4)250-VAC/30-VDCresistive load30-VDC inductive load (L/R = 7 ms)250-VAC inductive load (cos = 0.4)250-VAC/30-VDCresistive load250-VAC/30-VDCresistive load250-VAC/30-VDCresistive load250-VAC inductive load (cos = 0.4)250-VAC inductive load (cos = 0.4)250-VAC inductive load (cos = 0.4)30-VDC inductive

106、 load (L/R = 7ms)30-VDC inductive load (L/R = 7 ms)30-VDC inductive load (L/R = 7 ms)5,0001,000500 100 50Endurance (x10 operations)3Endurance (x10 operations)3Endurance (x10 operations)3Endurance (x10 operations)310,0005,0001,000500 100505,0001,000500 100 505,0001,000500 100 505,0001,000500 100 50Am

107、bient temperature (C)Maximum coil voltage (%)Ambient Temperature vs Maximum Coil VoltageDC coilAC coilNote: The maximum coil voltage refers to the maxi-mum value in a varying range of operating power voltage, not a continuous voltage.Engineering Data (cont.)PCB Power Relay G2RFlux Protection/Plug-in

108、 RelaysG2R-1, G2R-1A, G2R-1-T, G2R-1A-T Endurance (x10 operations)3G2R-1-E, G2R-1A-EG2R-1Z, G2R-1AZSwitching current (A)Switching current (A)Switching current (A)G2R-1-H, G2R-1A-H, G2R-2 G2R-2AG2R-2-H, G2R-2A-HSwitching current (A)Switching current (A)Endurance250-VAC/30-VDCresistive load250-VAC ind

109、uctive load (cos = 0.4)30-VDC inductive load (L/R = 7ms)250-VAC/30-VDCresistive load250-VAC (cos = 0.4)/30-VDC (L/R = 7 ms) inductive load30-VDC inductive load (L/R = 7 ms)250-VAC/30-VDC resistive load250-VAC inductive load (cos = 0.4)30-VDC inductive load (L/R = 7 ms)30-VDC inductive load (L/R = 7

110、ms)250-VAC/30-VDCresistive load250-VAC/30-VDCresistive load250-VAC inductive load (cos = 0.4)250-VAC inductive load (cos = 0.4)5,0001,000 500 100 50Endurance (x10 operations)3Endurance (x10 operations)3Endurance (x10 operations)3Endurance (x10 operations)35,0001,000 500 100 505,0001,000 500 100 5010

111、,0005,0003,000 1,000 500 300 10010,0005,0003,000 1,000500 300 100 5030G2R-13-S, G2R-1A3-SFully Sealed RelaysG2R-14, G2R-1A4Switching voltage (V)Switching voltage (V)Switching voltage (V)ACresistive loadAC inductive load (cos = 0.4)DC resistive loadDC inductive load (L/R = 7 ms)ACresistive loadDC ind

112、uctive load (L/R = 7 ms)DCresistive loadACresistive loadDC inductive load (L/R = 7 ms)DCresistive loadAC inductive load (cos = 0.4)AC inductive load (cos = 0.4)Switching current (A)Switching current (A)Switching current (A)G2R-24, G2R-2A4G2R-1Z4, G2R-1AZ4Power RelaysOmron 08 Cat 1-302 5/10/07 15:39

113、Page 126129Text128TextPCB Power Relay G2RRelays with PCB TerminalsSPDT RelaysG2R-14, G2R-1Z4Mounting Holes (Bottom View)Terminal Arrangement/Internal Connections (Bottom View)Tolerance: 0.1SPST-NO RelaysG2R-1A4, G2R-1AZ429 max.13.5 max.25.5 max.(24.8)*40.30.50.50.16129 max.25.5 max.(24.8)*13.5 max.4

114、0.30.50.161207.53.5 3.5(2.1)(2.7)Five, 1.3-dia.holes207.53.5(2.1)(2.7)Four, 1.3-dia.holes152341534(28.6)*(12.9)*Average value(No coil polarity)(28.6)*(12.9)*Average value(No coil polarity)Relays with PCB TerminalsDPDT RelaysG2R-2, G2R-2-HMounting Holes (Bottom View)Terminal Arrangement/Internal Conn

115、ections (Bottom View)Tolerance: 0.1DPST-NO RelaysG2R-2A, G2R-2A-HDPDT Relays29 max.25.5 max.(0.3)13 max.40.30.50.50.15129 max.13 max.25.5 max.(25.2)*(0.3)0.340.150.5115557.5(2.7)(2.1)(2.1)Eight, 1.3-dia.holes2057.5(2.7)(2.1)(2.1)Six, 1.3-dia.holes18342657183465(25.2)*(28.8)*(12.7)*(12.7)*Average val

116、ue*Average value(28.8)*(No coil polarity)(No coil polarity)DPDT RelaysG2R-2429 max.13.5 max.25.5 max.(24.7)*40.30.50.50.15115557.5(2.7)(2.1)(2.1)Eight, 1.3-dia.holes18342657g*Average value(12.8)*(28.6)*(No coil polarity)PCB Power Relay G2RDimensionsNote: 1. All units are in millimetres unless otherw

117、ise indicated.2. Orientation marks are indicated as follows:Relays with PCB TerminalsSPDT RelaysG2R-1, G2R-1Z, G2R-1-HMounting Holes (Bottom View)Terminal Arrangement/Internal Connections (Bottom View)Tolerance: 0.1The illustration shows the G2R-1.SPST-NO RelaysG2R-1A, G2R-1AZ, G2R-1A-HSPDT/High-cap

118、acity RelaysG2R-1-ESPST-NO/High-capacity RelaysG2R-1A-EThe illustration shows the G2R-1A.29 max.13 max.25.5 max.(0.3)0.340.50.5*0.16129 max.25.5 max.(25.3)*(0.3)40.5*0.30.1613 max.129 max.25.5 max.(25.3)*(0.3)40.50.30.30.1613 max.129 max.25.5 max.(25.3)*(0.3)40.30.30.1613 max.1207.53.5 3.5(2.1)(2.7)

119、Five, 1.3-dia.holes207.53.5(2.1)(2.7)Four, 1.3-dia.holes2057.5(2.7)(2.1)(2.1)Six, 1.3-dia.holes15557.5(2.7)(2.1)(2.1)Eight, 1.3-dia.holes15234153418234567183456(25.3)*(28.8)*(12.7)*Average value(No coil polarity)(No coil polarity)(No coil polarity)(No coil polarity)*Average value*Average value*Avera

120、ge value(28.8)*(28.8)*(28.8)*(12.7)*(12.7)*(12.7)*0.3 (-H Type)*0.3 (-H Type)Power RelaysOmron 08 Cat 1-302 5/10/07 15:39 Page 128129Text128TextPCB Power Relay G2RRelays with PCB TerminalsSPDT RelaysG2R-14, G2R-1Z4Mounting Holes (Bottom View)Terminal Arrangement/Internal Connections (Bottom View)Tol

121、erance: 0.1SPST-NO RelaysG2R-1A4, G2R-1AZ429 max.13.5 max.25.5 max.(24.8)*40.30.50.50.16129 max.25.5 max.(24.8)*13.5 max.40.30.50.161207.53.5 3.5(2.1)(2.7)Five, 1.3-dia.holes207.53.5(2.1)(2.7)Four, 1.3-dia.holes152341534(28.6)*(12.9)*Average value(No coil polarity)(28.6)*(12.9)*Average value(No coil

122、 polarity)Relays with PCB TerminalsDPDT RelaysG2R-2, G2R-2-HMounting Holes (Bottom View)Terminal Arrangement/Internal Connections (Bottom View)Tolerance: 0.1DPST-NO RelaysG2R-2A, G2R-2A-HDPDT Relays29 max.25.5 max.(0.3)13 max.40.30.50.50.15129 max.13 max.25.5 max.(25.2)*(0.3)0.340.150.5115557.5(2.7)

123、(2.1)(2.1)Eight, 1.3-dia.holes2057.5(2.7)(2.1)(2.1)Six, 1.3-dia.holes18342657183465(25.2)*(28.8)*(12.7)*(12.7)*Average value*Average value(28.8)*(No coil polarity)(No coil polarity)DPDT RelaysG2R-2429 max.13.5 max.25.5 max.(24.7)*40.30.50.50.15115557.5(2.7)(2.1)(2.1)Eight, 1.3-dia.holes18342657g*Ave

124、rage value(12.8)*(28.6)*(No coil polarity)PCB Power Relay G2RDimensionsNote: 1. All units are in millimetres unless otherwise indicated.2. Orientation marks are indicated as follows:Relays with PCB TerminalsSPDT RelaysG2R-1, G2R-1Z, G2R-1-HMounting Holes (Bottom View)Terminal Arrangement/Internal Co

125、nnections (Bottom View)Tolerance: 0.1The illustration shows the G2R-1.SPST-NO RelaysG2R-1A, G2R-1AZ, G2R-1A-HSPDT/High-capacity RelaysG2R-1-ESPST-NO/High-capacity RelaysG2R-1A-EThe illustration shows the G2R-1A.29 max.13 max.25.5 max.(0.3)0.340.50.5*0.16129 max.25.5 max.(25.3)*(0.3)40.5*0.30.1613 ma

126、x.129 max.25.5 max.(25.3)*(0.3)40.50.30.30.1613 max.129 max.25.5 max.(25.3)*(0.3)40.30.30.1613 max.1207.53.5 3.5(2.1)(2.7)Five, 1.3-dia.holes207.53.5(2.1)(2.7)Four, 1.3-dia.holes2057.5(2.7)(2.1)(2.1)Six, 1.3-dia.holes15557.5(2.7)(2.1)(2.1)Eight, 1.3-dia.holes15234153418234567183456(25.3)*(28.8)*(12.

127、7)*Average value(No coil polarity)(No coil polarity)(No coil polarity)(No coil polarity)*Average value*Average value*Average value(28.8)*(28.8)*(28.8)*(12.7)*(12.7)*(12.7)*0.3 (-H Type)*0.3 (-H Type)Power RelaysOmron 08 Cat 1-302 5/10/07 15:39 Page 128131Text130TextPCB Power Relay G2RSPDT RelaysG2R-

128、1-TRelays with Quick-connect TerminalsSPST-NO RelaysG2R-1A-TNote: Model number of quick-connect terminal is 187.30.5 max.7.55.25.217.4Five, 1.3-dia. holes4.750.58.529.5 max.2.545 max.14 max.30.5 max.7.517.45.2Five, 1.3-dia. holes4.750.58.529.5 max.2.545 max.14 max.Mounting Holes (Bottom View)Toleran

129、ce: 0.138Two M3 or two 3.5 dia.Terminal Arrangement/Internal Connections (Bottom View)Mounting Holes (Bottom View)Terminal Arrangement/Internal Connections (Bottom View)38Two M3 or two 3.5 dia.154321543(No coil polarity)(No coil polarity)*Average value(29.7)*(13.1)*(43.9)*(43.9)*(13.1)*(29.7)*Averag

130、e valuePrecautions MountingWhen mounting a number of relays on a PCB, be sure to providea minimum mounting space of 5 mm between the two juxtaposedrelays as shown below.The above minimum mounting space is necessary due to mutualthermal interference generated by the relays. This restriction maybe ign

131、ored, however, depending on the operating conditions ofthe relays. Consult OMRON for details.There is no restriction on the mounting direction of each relay onthe PCB.When using this circuit, confirm the set and reset states and thentake into account the circuit constant.5 mm min.5 mm min.CAT. No. K

132、013-E2-12A-XPCB Power Relay G2RDPST-NO RelaysG2R-2A4Double-winding Latching Relays with PCB TerminalsSPDT RelaysG2RK-129 max.13.5 max.25.5 max.40.30.150.5129 max.13 max.25.5 max.(25.2)*4(0.3)0.310.512057.5(2.7)(2.1)(2.1)Six, 1.3-dia.holes207.53.5 3.5(2.1)Seven, 1.3-dia.holes5(2.7)1834651734526SR+-+-

133、*Average value*Average value(24.7)*(28.8)*(12.8)*(12.8)*(28.6)*(No coil polarity)(After confirming coil polarity, wire correctly.)Double-winding Latching Relays with PCB TerminalsSPST-NO RelaysG2RK-1AMounting Holes (Bottom View)Terminal Arrangement/Internal Connections (Bottom View)Tolerance: 0.1DPD

134、T RelaysG2RK-2DPST-NO RelaysG2RK-2A29 max.13 max.25.5 max.(25.2)*(0.3)40.30.510.16129 max.13 max.25.5 max.(25.2)*(0.3)40.30.180.18110.1529 max.13 max.25.5 max.(0.3)40.30.18110.15207.53.5(2.1)(2.7)Six, 1.3-dia.holes510557.5(2.7)(2.1)(2.1)Eight, 1.3-dia.holes5(2.7)57.5(2.7)(2.1)(2.1)Six, 1.3-dia.holes

135、515(2.7)174526SR+-+-11045376829SR+-+-110457629SR+-+-(After confirming coil polarity, wire correctly.)(After confirming coil polarity, wire correctly.)(After confirming coil polarity, wire correctly.)(28.8)*(12.8)*(12.8)*(28.8)*Average value*Average valuePower RelaysOmron 08 Cat 1-302 5/10/07 15:39 P

136、age 130131Text130TextPCB Power Relay G2RSPDT RelaysG2R-1-TRelays with Quick-connect TerminalsSPST-NO RelaysG2R-1A-TNote: Model number of quick-connect terminal is 187.30.5 max.7.55.25.217.4Five, 1.3-dia. holes4.750.58.529.5 max.2.545 max.14 max.30.5 max.7.517.45.2Five, 1.3-dia. holes4.750.58.529.5 m

137、ax.2.545 max.14 max.Mounting Holes (Bottom View)Tolerance: 0.138Two M3 or two 3.5 dia.Terminal Arrangement/Internal Connections (Bottom View)Mounting Holes (Bottom View)Terminal Arrangement/Internal Connections (Bottom View)38Two M3 or two 3.5 dia.154321543(No coil polarity)(No coil polarity)*Averag

138、e value(29.7)*(13.1)*(43.9)*(43.9)*(13.1)*(29.7)*Average valuePrecautions MountingWhen mounting a number of relays on a PCB, be sure to providea minimum mounting space of 5 mm between the two juxtaposedrelays as shown below.The above minimum mounting space is necessary due to mutualthermal interfere

139、nce generated by the relays. This restriction maybe ignored, however, depending on the operating conditions ofthe relays. Consult OMRON for details.There is no restriction on the mounting direction of each relay onthe PCB.When using this circuit, confirm the set and reset states and thentake into ac

140、count the circuit constant.5 mm min.5 mm min.CAT. No. K013-E2-12A-XPCB Power Relay G2RDPST-NO RelaysG2R-2A4Double-winding Latching Relays with PCB TerminalsSPDT RelaysG2RK-129 max.13.5 max.25.5 max.40.30.150.5129 max.13 max.25.5 max.(25.2)*4(0.3)0.310.512057.5(2.7)(2.1)(2.1)Six, 1.3-dia.holes207.53.

141、5 3.5(2.1)Seven, 1.3-dia.holes5(2.7)1834651734526SR+-+-*Average value*Average value(24.7)*(28.8)*(12.8)*(12.8)*(28.6)*(No coil polarity)(After confirming coil polarity, wire correctly.)Double-winding Latching Relays with PCB TerminalsSPST-NO RelaysG2RK-1AMounting Holes (Bottom View)Terminal Arrangem

142、ent/Internal Connections (Bottom View)Tolerance: 0.1DPDT RelaysG2RK-2DPST-NO RelaysG2RK-2A29 max.13 max.25.5 max.(25.2)*(0.3)40.30.510.16129 max.13 max.25.5 max.(25.2)*(0.3)40.30.180.18110.1529 max.13 max.25.5 max.(0.3)40.30.18110.15207.53.5(2.1)(2.7)Six, 1.3-dia.holes510557.5(2.7)(2.1)(2.1)Eight, 1

143、.3-dia.holes5(2.7)57.5(2.7)(2.1)(2.1)Six, 1.3-dia.holes515(2.7)174526SR+-+-11045376829SR+-+-110457629SR+-+-(After confirming coil polarity, wire correctly.)(After confirming coil polarity, wire correctly.)(After confirming coil polarity, wire correctly.)(28.8)*(12.8)*(12.8)*(28.8)*Average value*Average valuePower RelaysOmron 08 Cat 1-302 5/10/07 15:39 Page 130