《Optiplex常见机型最新BIOS中英文对照表》由会员分享，可在线阅读，更多相关《Optiplex常见机型最新BIOS中英文对照表（25页珍藏版）》请在金锄头文库上搜索。
1、Optiplex 常见机型最新BIOS中英文对照表（有些项目为机器可选配置）General常规信息System BoardDisplays the following information:System in formati on: DisplaysTag, Express Service Code,Tag, Manu facture Date,Memory in formati on: DisplaysMemoryBIOS Versio n, ServiceAssetand the Own ership Date.In stalled,Memory Speed, Number of Act
2、ive号，出厂日期，Ownership日期.DIMM_1Processor TypeChann els, Memory Tech no logy,Size,DIMM_2 Size.Processor in formati on: Displays theProcessor Speed, Processor Bus Speed, ProcessorL2 cache, Processor ID, Microcode Vers ion, MultiCore Capable and HT Capable 64-bit Tech no logy. Slot In formati on: Displays
3、 available slots on the system board.该项目显示以下详细信息:*系统信息：BIOS版本，机器服务编号，快速服务代码，资产编内存信息:安装内存容量；可用内存容量；当前内存频率;Memory 通道； Memory 技术； DIMM_1 容量；DIMM _2 容量 CPU信息:CPU型号；CPU频率；CPU总线 频率；CPU 2级 缓存；CPU ID ;处理器代码版本；多核数；HT 64位技术。插槽信息:显示主板可用插槽信息。Date/TimeDisplays the system date and time. Changes to the system date
4、 and time take effect immediately.显示当前的日期和时间。DrivesDiskette drive软驱设备This field determines how the BIOS configures floppy drives, Operating Systems with USB support will recognize USB Floppy drives regardless of this setting: Disable - All Floppy drive are disable Enable - All floppy drive are enabl
5、e. NOTE:The ； USB Controller ； Setup option will affect floppy operation.该项可以设置软驱。禁用-禁用所有软驱。启用-启用所有软驱 注意：The ”； USB Controller; 设置选项也将控制 USB软驱SATA OperationSATA设置configures the operating mode og the integrated hard drive controller RAID Autodetect / AHCI= RAID if sig ned drives,otherwise AHCI RAID A
6、utodetect / ATA= RAID if sig ned drives,otherwise ATA RAID On / ATA = SATA is con figured for RAID on every boot* Legacy = The hard drive con troller is con figured forlegacy mode NOTE:Legacy mode provides for compatibility with some older operating systsems that do not support native resources assi
7、gned to the drive controller.RAID Mode is incompatible with ImageServer. Please disable RAID mode if enabling Image Server.SATA Operation设置选项：禁用，ATA , AHCI 和 Raid On默认设置是 Raid On=SATA设置支持Raid* RAID 自动检测/ AHCI =设置自动检测RAID，如无Raid即AHCI模式 RAID 自动检测/ ATA =设置自动检测RAID，如无Raid即 ATA模式 RAID On / ATA =配置SATA模式每
8、次开机都启动Raid。 Legacy = The hard drive con troller is con figured for legacy modeLegacy模式提供对一些旧操作系统的硬盘控制器的兼容模式。SMART. ReportingThis field controls whether hard drive errors for integrated drives are reported during systemstartup. This technology is part of the SMART(Self Monitoring Analysis and Reporti
9、ngTechnology) specification.This option is disabled by default.S.M.A.R.T.该项可以设置在系统启动时提供硬盘错误信息报告。该技术是S.M.A.R.T.(自我管理分析与报告技术)的一部分。默认禁用。DrivesEnables or disables the SATA drives connected to the system board.启用或禁用SATA设备连接到主板上。Boot SequenceSpecifies the order in which the computer attempts to find an op
10、erating system from thedevices specified in this list. On board or USB Floppy On board SATA Hard DriveOn board or USB CD-Rom Drive计算机尝试从以下列表顺序启动:软驱* SATA硬盘光驱System Configuration系统配置Integrated NICEnables or disables the integrated network card. You can set the integrated NIC to:* Disable Enable （defa
11、ult）* Enable with PXE Enable with ImageSever NOTE:PXE is needed only if intending to boost to an operating system located on a server, not if you are bootinng on an OS located on a hard drive in this system.启用和禁用集成网卡：该项可以设置：禁用启用（默认项目）-启用PXE*启用ImageSever （该功能目前只在美国销售）USB ControllerEnables or disables
12、 the integrated USB controller. You can set the USB controller to:En able(default) Disable No boot NOTE:Operating systems with USB support will recognize USB Storage启用或禁用集成USB控制器。可设置：启用(默认项目)默认不启动Parallel Port并口Identifies and defines the parallel port settings. You can set the parallel port to: Disa
13、ble AT PS/2 (default) EPP ECP No DMA ECP DMA 1ECP DMA 3并口设置选项: AT PS/2 (默认选项) EPP ECP No DMA ECP DMA 1 ECP DMA 3Parallel Port AddressSets the base I/O address of the integrated parallel port.设置集成并口 I/O地址。Serial Port #1Identifies and defines the serial port settings. You can set the serial port to: D
14、isable* Auto(default) COM1 COM3 NOTE:The Operating System may allocate resources even though the setting is disabled.串口设置选项:禁用, 自动（默认选项）COM1 ,COM3 ,Miscellaneous Devices多种设备设置Enables or disables the following onboard devices: Front USB PCI slots Audio OptiPlex ON Reader* Rear Quad USB PCI Slots WiFi
15、 NIC Slot启用或禁用下面设备：前置USB* PCI插槽*声卡 OptiPlex ON Reader*后置USB-无线网卡插槽Video显示设置Primary VideoThis field determines which video controller will become the primary video controller when 2 controllers are available in the system. This selection matters only if there are 2 video controller present. Auto (default) - Use the add-in video controller. Onboard/PEG- Use the integra
