《循环水场DCS系统安装说明.doc》由会员分享，可在线阅读，更多相关《循环水场DCS系统安装说明.doc（10页珍藏版）》请在金锄头文库上搜索。
1、循环水场DCS系统安装说明循环水场DCS系统安装说明11操作系统安装11.1BIOS设置11.2Windows安装11.2.1安装步骤11.2.2Windows设置21.2.3驱动安装52DeltaV安装102.1软件安装102.2操作站配置102.3运行环境设置101 操作系统安装1.1 BIOS设置 Reboot the computer and Press F2 when prompted to enter the BIOS configuration. Scroll down and Highlight Boot Sequence, press Enter. Use the + and
2、 - keys to re-arrange the boot sequence if necessary. Press space bar to enable/disable each item. Press ESC to exit back to the Main BIOS setup screen. Press F10 to save and exit BIOS setup. 1.2 Windows安装1.2.1 安装步骤1) Power on the computer and insert the Windows XP Professional installation CD in th
3、e CD-ROM drive. Reboot the computer. Press any key to boot from CD.i. （Windows XP installer loads the installation and startup files and starts Windows XP.）2) At the Welcome to Setup press ENTER. 3) Page Down through and read the End User License Agreement. When finished press F8. 4) （If an existing
4、 OS is installed, you might get another screen that asks if you want to repair an existing install or continue to install a fresh copy of XP. Press ESC to continue (to install a fresh copy of XP). 5) （If partitions already exist they should be deleted before continuing.）6) Highlight the partition. 7
5、) Press D. 8) Press Enter (System Partition). 9) Press L.10) Repeat the process for all existing partitions before continuing. 11) Observe that only Un-partitioned Space exists and is highlighted. 12) Press C to create a new partition.13) With Partition New 10000 highlighted, press ENTER. 14) Highli
6、ght Format the partition using the NTFS file system and press ENTER. 15) Restart your computer.i. (During the Windows XP Professional installation process, various information screens are displayed. Also, the screen may go blank while Windows checks your hardware.)16) At the Regional and Language Op
7、tions page click NEXT. 17) At the Personalize Your Software dialog box enter “YI” and “LZSH”and click NEXT. 18) If prompted, at the Your Product Key page enter the product code from your Windows XP CD and click NEXT.For the New Installation and Restore CD provided with new PCs, use key code = KQDGG-
8、G4V3V-39QWQ-4CB49-BH9JM. 19) At the Computer Name and Administrator Password dialog box enter the name the computer will use on the network and deltav in the password and confirm password dialog box and click NEXT.20) Setting the time zone as Beijing.21) Restart computer, remove the compact disk fro
9、m the CD-ROM drive.1.2.2 Windows设置1) Once logged into the Windows XP Professional machine, click Control Panel on the start menu. 2) Click Performance and Maintenance. 3) Click Power Options. 4) On the Power Options Properties pop-up window, click the Hibernate tab. 5) Disable (Uncheck) the Enable h
10、ibernation box. 6) Click Apply. 7) Click OK to close the Power Options Properties window. 8) Click Start | Control Panel. 9) Click Performance and Maintenance. 10) Select Administrative Tools. 11) Double click the Computer Management icon. 12) On the Computer Management pop-up window, point to and c
11、lick Disk Management. 13) Point to and right click the CD-ROM 0 icon. 14) Highlight Change Driver Letter and Paths. 15) On the pop-up box, click Change. 16) On the Change Drive Letter or Path pop-up box, click the drive letter drop down box, highlight and click E. 17) Click OK to activate the change
12、. 18) Click Yes to confirm the new drive letter. 19) On the Computer Management screen, point the mouse to drive C icon and right click. 20) Highlight and click Properties. 21) On the Local Disk ( C: ) Properties window, type DVSys in the volume label dialog box. 22) Click OK 23) Right click the Una
13、llocated box space on Disk 0. 24) Highlight and click New Partition. 25) On the Welcome to the New Partition Wizard page click Next. 26) Ensure the Primary Partition radio button is selected and click Next. 27) Observe that the value of the remainder of drive 0 is in the Partition Size in MB field.
14、28) Click Next. 29) Ensure the Assign the following Driver Letter radio button is selected and that D is in the drive letter drop down box. 30) Click Next. 31) Ensure the Format this partition with the following settings radio button is selected and NTFS is in the File System drop down box. 32) Ente
15、r DVData in the Volume Label dialog box. 33) Check the Perform a Quick Format check box. 34) Click Next. 35) Click Finish. 36) Click Start on the Task Bar. 37) Point to and right click My Computer. 38) Point to and click Properties. 39) Click the Advanced tab on the System Properties screen. 40) Under the Performance section click Settings. The Performance Options window displays. 41) On the Visual Effects tab, click the Adj
