《外文翻译英文(电气类)—电信现代运营Telecommunication-Modern-Operation.doc》由会员分享，可在线阅读，更多相关《外文翻译英文(电气类)—电信现代运营Telecommunication-Modern-Operation.doc（7页珍藏版）》请在金锄头文库上搜索。
1、Telecommunication Modern OperationTelephoneIn an analogue telephone network, the caller is connected to the person he wants to talk to by switches at various telephone exchanges. The switches form an electrical connection between the two users and the setting of these switches is determined electron
2、ically when the caller dials the number. Once the connection is made, the callers voice is transformed to an electrical signal using a small microphone in the callers handset. This electrical signal is then sent through the network to the user at the other end where it transformed back into sound by
3、 a small speaker in that persons handset. There is a separate electrical connection that works in reverse, allowing the users to converse. The fixed-line telephones in most residential homes are analogue that is, the speakers voice directly determines the signals voltage. Although short-distance cal
4、ls may be handled from end-to-end as analogue signals, increasingly telephone service providers are transparently converting the signals to digital for transmission before converting them back to analogue for reception. The advantage of this is that digitized voice data can travel side-by-side with
5、data from the Internet and can be perfectly reproduced in long distance communication (as opposed to analogue signals that are inevitably impacted by noise).Mobile phones have had a significant impact on telephone networks. Mobile phone subscriptions now outnumber fixed-line subscriptions in many ma
6、rkets. Sales of mobile phones in 2005 totalled 816.6 million with that figure being almost equally shared amongst the markets of Asia/Pacific (204 m), Western Europe (164 m), CEMEA (Central Europe, the Middle East and Africa) (153.5 m), North America (148 m) and Latin America (102 m). In terms of ne
7、w subscriptions over the five years from 1999, Africa has outpaced other markets with 58.2% growth. Increasingly these phones are being serviced by systems where the voice content is transmitted digitally such as GSM or W-CDMA with many markets choosing to depreciate analogue systems such as AMPS. T
8、here have also been dramatic changes in telephone communication behind the scenes. Starting with the operation of TAT-8 in 1988, the 1990s saw the widespread adoption of systems based on optic fibres. The benefit of communicating with optic fibres is that they offer a drastic increase in data capaci
9、ty. TAT-8 itself was able to carry 10 times as many telephone calls as the last copper cable laid at that time and todays optic fibre cables are able to carry 25 times as many telephone calls as TAT-8. This increase in data capacity is due to several factors: First, optic fibres are physically much
10、smaller than competing technologies. Second, they do not suffer from crosstalk which means several hundred of them can be easily bundled together in a single cable. Lastly, improvements in multiplexing have led to an exponential growth in the data capacity of a single fibre. Assisting communication
11、across many modern optic fibre networks is a protocol known as Asynchronous Transfer Mode (ATM). The ATM protocol allows for the side-by-side data transmission mentioned in the second paragraph. It is suitable for public telephone networks because it establishes a pathway for data through the networ
12、k and associates a traffic contract with that pathway. The traffic contract is essentially an agreement between the client and the network about how the network is to handle the data; if the network cannot meet the conditions of the traffic contract it does not accept the connection. This is importa
13、nt because telephone calls can negotiate a contract so as to guarantee themselves a constant bit rate, something that will ensure a callers voice is not delayed in parts or cut-off completely. There are competitors to ATM, such as Multiprotocol Label Switching (MPLS), that perform a similar task and
14、 are expected to supplant ATM in the future. Radio and televisionIn a broadcast system, a central high-powered broadcast tower transmits a high-frequency electromagnetic wave to numerous low-powered receivers. The high-frequency wave sent by the tower is modulated with a signal containing visual or
15、audio information. The antenna of the receiver is then tuned so as to pick up the high-frequency wave and a demodulator is used to retrieve the signal containing the visual or audio information. The broadcast signal can be either analogue (signal is varied continuously with respect to the informatio
16、n) or digital (information is encoded as a set of discrete values). The broadcast media industry is at a critical turning point in its development, with many countries moving from analogue to digital broadcasts. This move is made possible by the production of cheaper, faster and more capable integrated circuits. The chief advantage of digital broadcasts is that they prevent a number of complaints with traditional analogue broadcasts. For television, this includes the e
