《IAR因版本不兼容打不开工程解决.doc》由会员分享，可在线阅读，更多相关《IAR因版本不兼容打不开工程解决.doc（5页珍藏版）》请在金锄头文库上搜索。
1、本文给出IAR因版本不兼容打不开IAR工作区遇到的各种问题及解决方法，包括依据提示修改版本，删除未知名称(ewp文件)。若还没解决，则创建新工作区、工程，并拷贝相关文件，我想这是一种通用化的解决方法(很诡异)。PS：本文以IAR工程项目ContikiCC2530Port为例，IAR for MCS-51版本是7.51A。本文记录了整个调试过程，实际场景，不妨先跳到第三部分，看行不行，不行的话，再按第二部分修改。一、IAR错误提示 昨天，在GitHub下载了一个IAR工程项目ContikiCC2530Port，打开*.eww文件出现一系列错误，如下：1.1 Broken options were
2、 detected in the project file.A backup copy will be made.图1 IAR警告Broken options1.2 The project file * was created by a newer version of project and cannot be opened图2 IAR警告created by a newer version1.3 The project * could not be open图3 IAR警告could not be openBuild区域显示如下信息：LOAD: Configuration ContikiB
3、ankedRelease in the project ContikiCC253xProj contains broken options for tool General:The format of this file is not supported by this version of the workbench.It appears to have been written by a newer version of the workbench. Diagnostics: Settings General: unsupported version - .Options for Gene
4、ral will be set to default. Creating backup of original project file.LOAD: Configuration ContikiBankedRelease in the project ContikiCC253xProj contains broken options for tool ICC8051: (Registry: unknown name: CompilerMisraRules04)Options for ICC8051 will be set to default.LOAD: Configuration Contik
5、iBankedRelease in the project ContikiCC253xProj contains broken options for tool XLINK: The format of this file is not supported by this version of the workbench. It appears to have been written by a newer version of the workbench.Diagnostics: Settings XLINK: unsupported version - .Options for XLINK
6、 will be set to default.如下图所示：图4 IAR log windows信息 初步断定，这些警告是因为IAR版本不兼容引起的，但事实上没那么简单，之前也遇见用新版本IAR打开旧版本IAR工程文件，可以直接打开(给出提示信息)，在这里还涉及到工程项目配置。解决方法是修改相关的IAR工程文件，描述IAR工程主要有.dep、.eww(Embedded Workbench Workspace)、.ewd(Embedded Workbench Debug)、.ewp(Embedded Workbench Project)文件。dep -(我也不知道)eww -工作区文件，描述工作
7、区包含哪些projectewd -C-SPY调试器项目设置文件ewp -IA项目的配置信息二、Broken options Broken options是由于项目文件配置不对引起的，按提示信息修改。版本不对的，修改版本；unknown name的，则删去这些配置选项。2.1 General2.1.1 Settings General: unsupported version(1)错误提示LOAD: Configuration ContikiBankedRelease in the project ContikiCC253xProj contains broken options for too
8、l General:The format of this file is not supported by this version of the workbench. It appears to have been written by a newer version of the workbench.Diagnostics:Settings General: unsupported version - . Options for General will be set to default. Creating backup of original project file.(2)解决 找一
9、个IAR现版本可以找开的工程文件，查看General的版本，并将工程文件的版本改成可支持的版本，如下图所示：2.1.2 unknown name: PDATA 8-15 register address(1)错误提示LOAD: Configuration ContikiBankedRelease in the project ContikiCC253xProj contains broken options for tool General: (Registry: unknown name: PDATA 8-15 register address)Options for General wil
10、l be set to default. Creating backup of original project file.(2)解决在.ewp文件找到PDATA 8-15 register address，删去.，如下：PDATA 8-15 register address0xA02.1.3 unknown name: PDATA 16-31 register address(1)错误提示LOAD: Configuration ContikiBankedRelease in the project ContikiCC253xProj contains broken options for t
11、ool General: (Registry: unknown name: PDATA 16-31 register address)Options for General will be set to default. Creating backup of original project file.(2)解决 同2.1.2，在.ewp文件找到PDATA 16-31 register address，删去.2.1.4 unknown name: General Far22 Heap Size(1)错误提示LOAD: Configuration ContikiBankedRelease in
12、the project ContikiCC253xProj contains broken options for tool General: (Registry: unknown name: General Far22 Heap Size)Options for General will be set to default. Creating backup of original project file.(2)解决 同2.1.2，在.ewp文件找到General Far22 Heap Size，删去.2.1.5 GeneralMisraVer(1)错误提示LOAD: Configurati
13、on ContikiBankedRelease in the project ContikiCC253xProj contains broken options for tool General: (Registry: unknown name: GeneralMisraVer)Options for General will be set to default. Creating backup of original project file.(2)解决 同2.1.2，在.ewp文件找到GeneralMisraVer，删去.2.1.6 GeneralMisraRules04(1)错误提示LO
14、AD: Configuration ContikiBankedRelease in the project ContikiCC253xProj contains broken options for tool General: (Registry:unknown name: GeneralMisraRules04)Options for General will be set to default. Creating backup of original project file.(2)解决 同2.1.2，在.ewp文件找到GeneralMisraRules04，删去.2.2 ICC8051(
15、ARM平台为ICCARM)2.2.1 Settings ICC8051: unsupported vesion(1)错误提示LOAD: Configuration ContikiBankedRelease in the project ContikiCC253xProj contains broken options for tool ICC8051:The format of this file is not supported by this version of the workbench. It appears to have been written by a newer version of the workbench.Diagnostics:Sett
