《IEEE344核电厂安全级电气设备抗震鉴定.DOC》由会员分享，可在线阅读，更多相关《IEEE344核电厂安全级电气设备抗震鉴定.DOC（74页珍藏版）》请在金锄头文库上搜索。
1、IEEE Standard for Seismic Qualification of Equipment for Nuclear Power Generating Stations IEEE Power and Energy Society Sponsored by the Nuclear Power Engineering Committee IEEE IEEE Std 344-2013 3 Park Avenue (Revision of New York, NY 10016-5997IEEE Std 344-2004)USA Authorized licensed use limited
2、 to: FUDAN UNIVERSITY. Downloaded on June 27,2014 at 08:47:06 UTC from IEEE Xplore. Restrictions apply. Authorized licensed use limited to: FUDAN UNIVERSITY. Downloaded on June 27,2014 at 08:47:06 UTC from IEEE Xplore. Restrictions apply. IEEE Std 344-2013 (Revision of IEEE Std 344-2004) IEEE Standa
3、rd for Seismic Qualification of Equipment for Nuclear Power Generating Stations Sponsor Nuclear Power Engineering Committee of the IEEE Power and Energy Society Approved 23 August 2013 IEEE-SA Standards Board Authorized licensed use limited to: FUDAN UNIVERSITY. Downloaded on June 27,2014 at 08:47:0
4、6 UTC from IEEE Xplore. Restrictions apply. Abstract: Practices are provided for establishing procedures that will yield data to demonstrate that the equipment can meet its performance requirements during and/or following one safe shutdown earthquake event preceded by a number of operating basis ear
5、thquake events. This standard may be used to establish tests, analyses, or experienced-based evaluations that will yield data to demonstrate equipment performance claims or to evaluate and verify performance of devices and assemblies as part of an overall qualification effort. Common methods current
6、ly in use for seismic qualification by test are presented. Two approaches to seismic analysis are described, one based on dynamic analysis and the other on static coefficient analysis. Two approaches to experienced-based seismic evaluation are described, one based on earthquake experience and the ot
7、her based on test experience. Keywords: earthquake, earthquake experience, equipment qualification, IEEE 344, inclusion rules, nuclear, operating basis earthquake, prohibited features, qualification methods, required response spectrum, response spectra, safe shutdown earthquake, safety function, sei
8、smic, seismic analysis, test experience, test response spectrum, type testing The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2013 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 22 Novemb
9、er 2013. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics Engineers, Incorporated. PDF: ISBN 978-0-7381-8657-3STD98396Print:ISBN 978-0-7381-8658-0STDPD98396IEEE prohibits discrimination
10、, harassment, and bullying. For more information, visit http:/www.ieee.org/web/aboutus/whatis/policies/p9-26.html. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Authorized licensed use
11、 limited to: FUDAN UNIVERSITY. Downloaded on June 27,2014 at 08:47:06 UTC from IEEE Xplore. Restrictions apply. Important Notices and Disclaimers Concerning IEEE Standards Documents IEEE documents are made available for use subject to important notices and legal disclaimers. These notices and discla
12、imers, or a reference to this page, appear in all standards and may be found under the heading “Important Notice” or “Important Notices and Disclaimers Concerning IEEE Standards Documents.” Notice and Disclaimer of Liability Concerning the Use of IEEE Standards Documents IEEE Standards documents (st
13、andards, recommended practices, and guides), both full-use and trial-use, are developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through a consensus development process
14、, approved by the American National Standards Institute (“ANSI”), which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and participate without compensation from IEEE. While IEEE administers
15、 the process and establishes rules to promote fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the soundness of any judgments contained in its standards. IEEE does not warrant or represent the accuracy or c
16、ontent of the material contained in its standards, and expressly disclaims all warranties (express, implied and statutory) not included in this or any other document relating to the standard, including, but not limited to, the warranties of: merchantability; fitness for a particular purpose; non-infringement; and quality, accuracy, effectiv
